1 /******************************************************************************
3 * Module Name: dsfield - Dispatcher field routines
5 *****************************************************************************/
8 * Copyright (C) 2000 - 2019, Intel Corp.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
57 #define _COMPONENT ACPI_DISPATCHER
58 ACPI_MODULE_NAME ("dsfield")
60 /* Local prototypes */
62 #ifdef ACPI_ASL_COMPILER
66 AcpiDsCreateExternalRegion (
67 ACPI_STATUS LookupStatus
,
68 ACPI_PARSE_OBJECT
*Op
,
70 ACPI_WALK_STATE
*WalkState
,
71 ACPI_NAMESPACE_NODE
**Node
);
76 ACPI_CREATE_FIELD_INFO
*Info
,
77 ACPI_WALK_STATE
*WalkState
,
78 ACPI_PARSE_OBJECT
*Arg
);
81 #ifdef ACPI_ASL_COMPILER
82 /*******************************************************************************
84 * FUNCTION: AcpiDsCreateExternalRegion (iASL Disassembler only)
86 * PARAMETERS: LookupStatus - Status from NsLookup operation
87 * Op - Op containing the Field definition and args
88 * Path - Pathname of the region
89 * ` WalkState - Current method state
90 * Node - Where the new region node is returned
94 * DESCRIPTION: Add region to the external list if NOT_FOUND. Create a new
97 ******************************************************************************/
100 AcpiDsCreateExternalRegion (
101 ACPI_STATUS LookupStatus
,
102 ACPI_PARSE_OBJECT
*Op
,
104 ACPI_WALK_STATE
*WalkState
,
105 ACPI_NAMESPACE_NODE
**Node
)
108 ACPI_OPERAND_OBJECT
*ObjDesc
;
111 if (LookupStatus
!= AE_NOT_FOUND
)
113 return (LookupStatus
);
118 * OperationRegion not found. Generate an External for it, and
119 * insert the name into the namespace.
121 AcpiDmAddOpToExternalList (Op
, Path
, ACPI_TYPE_REGION
, 0, 0);
123 Status
= AcpiNsLookup (WalkState
->ScopeInfo
, Path
, ACPI_TYPE_REGION
,
124 ACPI_IMODE_LOAD_PASS1
, ACPI_NS_SEARCH_PARENT
, WalkState
, Node
);
125 if (ACPI_FAILURE (Status
))
130 /* Must create and install a region object for the new node */
132 ObjDesc
= AcpiUtCreateInternalObject (ACPI_TYPE_REGION
);
135 return (AE_NO_MEMORY
);
138 ObjDesc
->Region
.Node
= *Node
;
139 Status
= AcpiNsAttachObject (*Node
, ObjDesc
, ACPI_TYPE_REGION
);
145 /*******************************************************************************
147 * FUNCTION: AcpiDsCreateBufferField
149 * PARAMETERS: Op - Current parse op (CreateXXField)
150 * WalkState - Current state
154 * DESCRIPTION: Execute the CreateField operators:
158 * CreateDwordFieldOp,
159 * CreateQwordFieldOp,
160 * CreateFieldOp (all of which define a field in a buffer)
162 ******************************************************************************/
165 AcpiDsCreateBufferField (
166 ACPI_PARSE_OBJECT
*Op
,
167 ACPI_WALK_STATE
*WalkState
)
169 ACPI_PARSE_OBJECT
*Arg
;
170 ACPI_NAMESPACE_NODE
*Node
;
172 ACPI_OPERAND_OBJECT
*ObjDesc
;
173 ACPI_OPERAND_OBJECT
*SecondDesc
= NULL
;
177 ACPI_FUNCTION_TRACE (DsCreateBufferField
);
181 * Get the NameString argument (name of the new BufferField)
183 if (Op
->Common
.AmlOpcode
== AML_CREATE_FIELD_OP
)
185 /* For CreateField, name is the 4th argument */
187 Arg
= AcpiPsGetArg (Op
, 3);
191 /* For all other CreateXXXField operators, name is the 3rd argument */
193 Arg
= AcpiPsGetArg (Op
, 2);
198 return_ACPI_STATUS (AE_AML_NO_OPERAND
);
201 if (WalkState
->DeferredNode
)
203 Node
= WalkState
->DeferredNode
;
208 /* Execute flag should always be set when this function is entered */
210 if (!(WalkState
->ParseFlags
& ACPI_PARSE_EXECUTE
))
212 ACPI_ERROR ((AE_INFO
,
213 "Parse execute mode is not set"));
214 return_ACPI_STATUS (AE_AML_INTERNAL
);
217 /* Creating new namespace node, should not already exist */
219 Flags
= ACPI_NS_NO_UPSEARCH
| ACPI_NS_DONT_OPEN_SCOPE
|
220 ACPI_NS_ERROR_IF_FOUND
;
223 * Mark node temporary if we are executing a normal control
224 * method. (Don't mark if this is a module-level code method)
226 if (WalkState
->MethodNode
&&
227 !(WalkState
->ParseFlags
& ACPI_PARSE_MODULE_LEVEL
))
229 Flags
|= ACPI_NS_TEMPORARY
;
232 /* Enter the NameString into the namespace */
234 Status
= AcpiNsLookup (WalkState
->ScopeInfo
,
235 Arg
->Common
.Value
.String
, ACPI_TYPE_ANY
,
236 ACPI_IMODE_LOAD_PASS1
, Flags
, WalkState
, &Node
);
237 if (ACPI_FAILURE (Status
))
239 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
240 Arg
->Common
.Value
.String
, Status
);
241 return_ACPI_STATUS (Status
);
246 * We could put the returned object (Node) on the object stack for later,
247 * but for now, we will put it in the "op" object that the parser uses,
248 * so we can get it again at the end of this scope.
250 Op
->Common
.Node
= Node
;
253 * If there is no object attached to the node, this node was just created
254 * and we need to create the field object. Otherwise, this was a lookup
255 * of an existing node and we don't want to create the field object again.
257 ObjDesc
= AcpiNsGetAttachedObject (Node
);
260 return_ACPI_STATUS (AE_OK
);
264 * The Field definition is not fully parsed at this time.
265 * (We must save the address of the AML for the buffer and index operands)
268 /* Create the buffer field object */
270 ObjDesc
= AcpiUtCreateInternalObject (ACPI_TYPE_BUFFER_FIELD
);
273 Status
= AE_NO_MEMORY
;
278 * Remember location in AML stream of the field unit opcode and operands
279 * -- since the buffer and index operands must be evaluated.
281 SecondDesc
= ObjDesc
->Common
.NextObject
;
282 SecondDesc
->Extra
.AmlStart
= Op
->Named
.Data
;
283 SecondDesc
->Extra
.AmlLength
= Op
->Named
.Length
;
284 ObjDesc
->BufferField
.Node
= Node
;
286 /* Attach constructed field descriptors to parent node */
288 Status
= AcpiNsAttachObject (Node
, ObjDesc
, ACPI_TYPE_BUFFER_FIELD
);
289 if (ACPI_FAILURE (Status
))
297 /* Remove local reference to the object */
299 AcpiUtRemoveReference (ObjDesc
);
300 return_ACPI_STATUS (Status
);
304 /*******************************************************************************
306 * FUNCTION: AcpiDsGetFieldNames
308 * PARAMETERS: Info - CreateField info structure
309 * ` WalkState - Current method state
310 * Arg - First parser arg for the field name list
314 * DESCRIPTION: Process all named fields in a field declaration. Names are
315 * entered into the namespace.
317 ******************************************************************************/
320 AcpiDsGetFieldNames (
321 ACPI_CREATE_FIELD_INFO
*Info
,
322 ACPI_WALK_STATE
*WalkState
,
323 ACPI_PARSE_OBJECT
*Arg
)
327 ACPI_PARSE_OBJECT
*Child
;
331 ACPI_OPERAND_OBJECT
*ResultDesc
;
332 ACPI_OPERAND_OBJECT
*ObjDesc
;
337 ACPI_FUNCTION_TRACE_PTR (DsGetFieldNames
, Info
);
340 /* First field starts at bit zero */
342 Info
->FieldBitPosition
= 0;
344 /* Process all elements in the field list (of parse nodes) */
349 * Four types of field elements are handled:
350 * 1) Name - Enters a new named field into the namespace
351 * 2) Offset - specifies a bit offset
352 * 3) AccessAs - changes the access mode/attributes
353 * 4) Connection - Associate a resource template with the field
355 switch (Arg
->Common
.AmlOpcode
)
357 case AML_INT_RESERVEDFIELD_OP
:
359 Position
= (UINT64
) Info
->FieldBitPosition
+
360 (UINT64
) Arg
->Common
.Value
.Size
;
362 if (Position
> ACPI_UINT32_MAX
)
364 ACPI_ERROR ((AE_INFO
,
365 "Bit offset within field too large (> 0xFFFFFFFF)"));
366 return_ACPI_STATUS (AE_SUPPORT
);
369 Info
->FieldBitPosition
= (UINT32
) Position
;
372 case AML_INT_ACCESSFIELD_OP
:
373 case AML_INT_EXTACCESSFIELD_OP
:
375 * Get new AccessType, AccessAttribute, and AccessLength fields
376 * -- to be used for all field units that follow, until the
377 * end-of-field or another AccessAs keyword is encountered.
378 * NOTE. These three bytes are encoded in the integer value
379 * of the parseop for convenience.
381 * In FieldFlags, preserve the flag bits other than the
385 /* AccessType (ByteAcc, WordAcc, etc.) */
387 Info
->FieldFlags
= (UINT8
)
388 ((Info
->FieldFlags
& ~(AML_FIELD_ACCESS_TYPE_MASK
)) |
389 ((UINT8
) ((UINT32
) (Arg
->Common
.Value
.Integer
& 0x07))));
391 /* AccessAttribute (AttribQuick, AttribByte, etc.) */
393 Info
->Attribute
= (UINT8
)
394 ((Arg
->Common
.Value
.Integer
>> 8) & 0xFF);
396 /* AccessLength (for serial/buffer protocols) */
398 Info
->AccessLength
= (UINT8
)
399 ((Arg
->Common
.Value
.Integer
>> 16) & 0xFF);
402 case AML_INT_CONNECTION_OP
:
404 * Clear any previous connection. New connection is used for all
405 * fields that follow, similar to AccessAs
407 Info
->ResourceBuffer
= NULL
;
408 Info
->ConnectionNode
= NULL
;
409 Info
->PinNumberIndex
= 0;
412 * A Connection() is either an actual resource descriptor (buffer)
413 * or a named reference to a resource template
415 Child
= Arg
->Common
.Value
.Arg
;
416 if (Child
->Common
.AmlOpcode
== AML_INT_BYTELIST_OP
)
418 Info
->ResourceBuffer
= Child
->Named
.Data
;
419 Info
->ResourceLength
= (UINT16
) Child
->Named
.Value
.Integer
;
423 /* Lookup the Connection() namepath, it should already exist */
425 Status
= AcpiNsLookup (WalkState
->ScopeInfo
,
426 Child
->Common
.Value
.Name
, ACPI_TYPE_ANY
,
427 ACPI_IMODE_EXECUTE
, ACPI_NS_DONT_OPEN_SCOPE
,
428 WalkState
, &Info
->ConnectionNode
);
429 if (ACPI_FAILURE (Status
))
431 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
432 Child
->Common
.Value
.Name
, Status
);
433 return_ACPI_STATUS (Status
);
438 case AML_INT_NAMEDFIELD_OP
:
440 /* Lookup the name, it should already exist */
442 Status
= AcpiNsLookup (WalkState
->ScopeInfo
,
443 (char *) &Arg
->Named
.Name
, Info
->FieldType
,
444 ACPI_IMODE_EXECUTE
, ACPI_NS_DONT_OPEN_SCOPE
,
445 WalkState
, &Info
->FieldNode
);
446 if (ACPI_FAILURE (Status
))
448 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
449 (char *) &Arg
->Named
.Name
, Status
);
450 return_ACPI_STATUS (Status
);
454 Arg
->Common
.Node
= Info
->FieldNode
;
455 Info
->FieldBitLength
= Arg
->Common
.Value
.Size
;
458 * If there is no object attached to the node, this node was
459 * just created and we need to create the field object.
460 * Otherwise, this was a lookup of an existing node and we
461 * don't want to create the field object again.
463 if (!AcpiNsGetAttachedObject (Info
->FieldNode
))
465 Status
= AcpiExPrepFieldValue (Info
);
466 if (ACPI_FAILURE (Status
))
468 return_ACPI_STATUS (Status
);
471 NamePath
= AcpiNsGetExternalPathname (Info
->FieldNode
);
472 ObjDesc
= AcpiUtCreateIntegerObject (Value
);
473 if (ACPI_SUCCESS (AeLookupInitFileEntry (NamePath
, &Value
)))
475 AcpiExWriteDataToField (ObjDesc
,
476 AcpiNsGetAttachedObject (Info
->FieldNode
),
479 AcpiUtRemoveReference (ObjDesc
);
480 ACPI_FREE (NamePath
);
485 /* Keep track of bit position for the next field */
487 Position
= (UINT64
) Info
->FieldBitPosition
+
488 (UINT64
) Arg
->Common
.Value
.Size
;
490 if (Position
> ACPI_UINT32_MAX
)
492 ACPI_ERROR ((AE_INFO
,
493 "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)",
494 ACPI_CAST_PTR (char, &Info
->FieldNode
->Name
)));
495 return_ACPI_STATUS (AE_SUPPORT
);
498 Info
->FieldBitPosition
+= Info
->FieldBitLength
;
499 Info
->PinNumberIndex
++; /* Index relative to previous Connection() */
504 ACPI_ERROR ((AE_INFO
,
505 "Invalid opcode in field list: 0x%X",
506 Arg
->Common
.AmlOpcode
));
507 return_ACPI_STATUS (AE_AML_BAD_OPCODE
);
510 Arg
= Arg
->Common
.Next
;
513 return_ACPI_STATUS (AE_OK
);
517 /*******************************************************************************
519 * FUNCTION: AcpiDsCreateField
521 * PARAMETERS: Op - Op containing the Field definition and args
522 * RegionNode - Object for the containing Operation Region
523 * ` WalkState - Current method state
527 * DESCRIPTION: Create a new field in the specified operation region
529 ******************************************************************************/
533 ACPI_PARSE_OBJECT
*Op
,
534 ACPI_NAMESPACE_NODE
*RegionNode
,
535 ACPI_WALK_STATE
*WalkState
)
538 ACPI_PARSE_OBJECT
*Arg
;
539 ACPI_CREATE_FIELD_INFO Info
;
542 ACPI_FUNCTION_TRACE_PTR (DsCreateField
, Op
);
545 /* First arg is the name of the parent OpRegion (must already exist) */
547 Arg
= Op
->Common
.Value
.Arg
;
551 Status
= AcpiNsLookup (WalkState
->ScopeInfo
, Arg
->Common
.Value
.Name
,
552 ACPI_TYPE_REGION
, ACPI_IMODE_EXECUTE
,
553 ACPI_NS_SEARCH_PARENT
, WalkState
, &RegionNode
);
554 #ifdef ACPI_ASL_COMPILER
555 Status
= AcpiDsCreateExternalRegion (Status
, Arg
,
556 Arg
->Common
.Value
.Name
, WalkState
, &RegionNode
);
558 if (ACPI_FAILURE (Status
))
560 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
561 Arg
->Common
.Value
.Name
, Status
);
562 return_ACPI_STATUS (Status
);
566 memset (&Info
, 0, sizeof (ACPI_CREATE_FIELD_INFO
));
568 /* Second arg is the field flags */
570 Arg
= Arg
->Common
.Next
;
571 Info
.FieldFlags
= (UINT8
) Arg
->Common
.Value
.Integer
;
574 /* Each remaining arg is a Named Field */
576 Info
.FieldType
= ACPI_TYPE_LOCAL_REGION_FIELD
;
577 Info
.RegionNode
= RegionNode
;
579 Status
= AcpiDsGetFieldNames (&Info
, WalkState
, Arg
->Common
.Next
);
580 if (Info
.RegionNode
->Type
== ACPI_ADR_SPACE_PLATFORM_COMM
&&
581 !(RegionNode
->Object
->Field
.InternalPccBuffer
582 = ACPI_ALLOCATE_ZEROED(Info
.RegionNode
->Object
->Region
.Length
)))
584 return_ACPI_STATUS (AE_NO_MEMORY
);
586 return_ACPI_STATUS (Status
);
590 /*******************************************************************************
592 * FUNCTION: AcpiDsInitFieldObjects
594 * PARAMETERS: Op - Op containing the Field definition and args
595 * ` WalkState - Current method state
599 * DESCRIPTION: For each "Field Unit" name in the argument list that is
600 * part of the field declaration, enter the name into the
603 ******************************************************************************/
606 AcpiDsInitFieldObjects (
607 ACPI_PARSE_OBJECT
*Op
,
608 ACPI_WALK_STATE
*WalkState
)
611 ACPI_PARSE_OBJECT
*Arg
= NULL
;
612 ACPI_NAMESPACE_NODE
*Node
;
617 ACPI_FUNCTION_TRACE_PTR (DsInitFieldObjects
, Op
);
620 /* Execute flag should always be set when this function is entered */
622 if (!(WalkState
->ParseFlags
& ACPI_PARSE_EXECUTE
))
624 if (WalkState
->ParseFlags
& ACPI_PARSE_DEFERRED_OP
)
626 /* BankField Op is deferred, just return OK */
628 return_ACPI_STATUS (AE_OK
);
631 ACPI_ERROR ((AE_INFO
,
632 "Parse deferred mode is not set"));
633 return_ACPI_STATUS (AE_AML_INTERNAL
);
637 * Get the FieldList argument for this opcode. This is the start of the
638 * list of field elements.
640 switch (WalkState
->Opcode
)
644 Arg
= AcpiPsGetArg (Op
, 2);
645 Type
= ACPI_TYPE_LOCAL_REGION_FIELD
;
648 case AML_BANK_FIELD_OP
:
650 Arg
= AcpiPsGetArg (Op
, 4);
651 Type
= ACPI_TYPE_LOCAL_BANK_FIELD
;
654 case AML_INDEX_FIELD_OP
:
656 Arg
= AcpiPsGetArg (Op
, 3);
657 Type
= ACPI_TYPE_LOCAL_INDEX_FIELD
;
662 return_ACPI_STATUS (AE_BAD_PARAMETER
);
665 /* Creating new namespace node(s), should not already exist */
667 Flags
= ACPI_NS_NO_UPSEARCH
| ACPI_NS_DONT_OPEN_SCOPE
|
668 ACPI_NS_ERROR_IF_FOUND
;
671 * Mark node(s) temporary if we are executing a normal control
672 * method. (Don't mark if this is a module-level code method)
674 if (WalkState
->MethodNode
&&
675 !(WalkState
->ParseFlags
& ACPI_PARSE_MODULE_LEVEL
))
677 Flags
|= ACPI_NS_TEMPORARY
;
681 Flags
|= ACPI_NS_OVERRIDE_IF_FOUND
;
684 * Walk the list of entries in the FieldList
685 * Note: FieldList can be of zero length. In this case, Arg will be NULL.
690 * Ignore OFFSET/ACCESSAS/CONNECTION terms here; we are only interested
691 * in the field names in order to enter them into the namespace.
693 if (Arg
->Common
.AmlOpcode
== AML_INT_NAMEDFIELD_OP
)
695 Status
= AcpiNsLookup (WalkState
->ScopeInfo
,
696 (char *) &Arg
->Named
.Name
, Type
, ACPI_IMODE_LOAD_PASS1
,
697 Flags
, WalkState
, &Node
);
698 if (ACPI_FAILURE (Status
))
700 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
701 (char *) &Arg
->Named
.Name
, Status
);
702 if (Status
!= AE_ALREADY_EXISTS
)
704 return_ACPI_STATUS (Status
);
707 /* Name already exists, just ignore this error */
712 Arg
->Common
.Node
= Node
;
715 /* Get the next field element in the list */
717 Arg
= Arg
->Common
.Next
;
720 return_ACPI_STATUS (AE_OK
);
724 /*******************************************************************************
726 * FUNCTION: AcpiDsCreateBankField
728 * PARAMETERS: Op - Op containing the Field definition and args
729 * RegionNode - Object for the containing Operation Region
730 * WalkState - Current method state
734 * DESCRIPTION: Create a new bank field in the specified operation region
736 ******************************************************************************/
739 AcpiDsCreateBankField (
740 ACPI_PARSE_OBJECT
*Op
,
741 ACPI_NAMESPACE_NODE
*RegionNode
,
742 ACPI_WALK_STATE
*WalkState
)
745 ACPI_PARSE_OBJECT
*Arg
;
746 ACPI_CREATE_FIELD_INFO Info
;
749 ACPI_FUNCTION_TRACE_PTR (DsCreateBankField
, Op
);
752 /* First arg is the name of the parent OpRegion (must already exist) */
754 Arg
= Op
->Common
.Value
.Arg
;
757 Status
= AcpiNsLookup (WalkState
->ScopeInfo
, Arg
->Common
.Value
.Name
,
758 ACPI_TYPE_REGION
, ACPI_IMODE_EXECUTE
,
759 ACPI_NS_SEARCH_PARENT
, WalkState
, &RegionNode
);
760 #ifdef ACPI_ASL_COMPILER
761 Status
= AcpiDsCreateExternalRegion (Status
, Arg
,
762 Arg
->Common
.Value
.Name
, WalkState
, &RegionNode
);
764 if (ACPI_FAILURE (Status
))
766 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
767 Arg
->Common
.Value
.Name
, Status
);
768 return_ACPI_STATUS (Status
);
772 /* Second arg is the Bank Register (Field) (must already exist) */
774 Arg
= Arg
->Common
.Next
;
775 Status
= AcpiNsLookup (WalkState
->ScopeInfo
, Arg
->Common
.Value
.String
,
776 ACPI_TYPE_ANY
, ACPI_IMODE_EXECUTE
,
777 ACPI_NS_SEARCH_PARENT
, WalkState
, &Info
.RegisterNode
);
778 if (ACPI_FAILURE (Status
))
780 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
781 Arg
->Common
.Value
.String
, Status
);
782 return_ACPI_STATUS (Status
);
786 * Third arg is the BankValue
787 * This arg is a TermArg, not a constant
788 * It will be evaluated later, by AcpiDsEvalBankFieldOperands
790 Arg
= Arg
->Common
.Next
;
792 /* Fourth arg is the field flags */
794 Arg
= Arg
->Common
.Next
;
795 Info
.FieldFlags
= (UINT8
) Arg
->Common
.Value
.Integer
;
797 /* Each remaining arg is a Named Field */
799 Info
.FieldType
= ACPI_TYPE_LOCAL_BANK_FIELD
;
800 Info
.RegionNode
= RegionNode
;
803 * Use Info.DataRegisterNode to store BankField Op
804 * It's safe because DataRegisterNode will never be used when create
805 * bank field \we store AmlStart and AmlLength in the BankField Op for
806 * late evaluation. Used in AcpiExPrepFieldValue(Info)
808 * TBD: Or, should we add a field in ACPI_CREATE_FIELD_INFO, like
811 Info
.DataRegisterNode
= (ACPI_NAMESPACE_NODE
*) Op
;
813 Status
= AcpiDsGetFieldNames (&Info
, WalkState
, Arg
->Common
.Next
);
814 return_ACPI_STATUS (Status
);
818 /*******************************************************************************
820 * FUNCTION: AcpiDsCreateIndexField
822 * PARAMETERS: Op - Op containing the Field definition and args
823 * RegionNode - Object for the containing Operation Region
824 * ` WalkState - Current method state
828 * DESCRIPTION: Create a new index field in the specified operation region
830 ******************************************************************************/
833 AcpiDsCreateIndexField (
834 ACPI_PARSE_OBJECT
*Op
,
835 ACPI_NAMESPACE_NODE
*RegionNode
,
836 ACPI_WALK_STATE
*WalkState
)
839 ACPI_PARSE_OBJECT
*Arg
;
840 ACPI_CREATE_FIELD_INFO Info
;
843 ACPI_FUNCTION_TRACE_PTR (DsCreateIndexField
, Op
);
846 /* First arg is the name of the Index register (must already exist) */
848 Arg
= Op
->Common
.Value
.Arg
;
849 Status
= AcpiNsLookup (WalkState
->ScopeInfo
, Arg
->Common
.Value
.String
,
850 ACPI_TYPE_ANY
, ACPI_IMODE_EXECUTE
,
851 ACPI_NS_SEARCH_PARENT
, WalkState
, &Info
.RegisterNode
);
852 if (ACPI_FAILURE (Status
))
854 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
855 Arg
->Common
.Value
.String
, Status
);
856 return_ACPI_STATUS (Status
);
859 /* Second arg is the data register (must already exist) */
861 Arg
= Arg
->Common
.Next
;
862 Status
= AcpiNsLookup (WalkState
->ScopeInfo
, Arg
->Common
.Value
.String
,
863 ACPI_TYPE_ANY
, ACPI_IMODE_EXECUTE
,
864 ACPI_NS_SEARCH_PARENT
, WalkState
, &Info
.DataRegisterNode
);
865 if (ACPI_FAILURE (Status
))
867 ACPI_ERROR_NAMESPACE (WalkState
->ScopeInfo
,
868 Arg
->Common
.Value
.String
, Status
);
869 return_ACPI_STATUS (Status
);
872 /* Next arg is the field flags */
874 Arg
= Arg
->Common
.Next
;
875 Info
.FieldFlags
= (UINT8
) Arg
->Common
.Value
.Integer
;
877 /* Each remaining arg is a Named Field */
879 Info
.FieldType
= ACPI_TYPE_LOCAL_INDEX_FIELD
;
880 Info
.RegionNode
= RegionNode
;
882 Status
= AcpiDsGetFieldNames (&Info
, WalkState
, Arg
->Common
.Next
);
883 return_ACPI_STATUS (Status
);