3189ea4d897d98449565ec538cf7b6acf08a917e
[reactos.git] / drivers / bus / acpi / acpica / parser / psargs.c
1 /******************************************************************************
2 *
3 * Module Name: psargs - Parse AML opcode arguments
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2019, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 #include "acpi.h"
45 #include "accommon.h"
46 #include "acparser.h"
47 #include "amlcode.h"
48 #include "acnamesp.h"
49 #include "acdispat.h"
50 #include "acconvert.h"
51
52 #define _COMPONENT ACPI_PARSER
53 ACPI_MODULE_NAME ("psargs")
54
55 /* Local prototypes */
56
57 static UINT32
58 AcpiPsGetNextPackageLength (
59 ACPI_PARSE_STATE *ParserState);
60
61 static ACPI_PARSE_OBJECT *
62 AcpiPsGetNextField (
63 ACPI_PARSE_STATE *ParserState);
64
65
66 /*******************************************************************************
67 *
68 * FUNCTION: AcpiPsGetNextPackageLength
69 *
70 * PARAMETERS: ParserState - Current parser state object
71 *
72 * RETURN: Decoded package length. On completion, the AML pointer points
73 * past the length byte or bytes.
74 *
75 * DESCRIPTION: Decode and return a package length field.
76 * Note: Largest package length is 28 bits, from ACPI specification
77 *
78 ******************************************************************************/
79
80 static UINT32
81 AcpiPsGetNextPackageLength (
82 ACPI_PARSE_STATE *ParserState)
83 {
84 UINT8 *Aml = ParserState->Aml;
85 UINT32 PackageLength = 0;
86 UINT32 ByteCount;
87 UINT8 ByteZeroMask = 0x3F; /* Default [0:5] */
88
89
90 ACPI_FUNCTION_TRACE (PsGetNextPackageLength);
91
92
93 /*
94 * Byte 0 bits [6:7] contain the number of additional bytes
95 * used to encode the package length, either 0,1,2, or 3
96 */
97 ByteCount = (Aml[0] >> 6);
98 ParserState->Aml += ((ACPI_SIZE) ByteCount + 1);
99
100 /* Get bytes 3, 2, 1 as needed */
101
102 while (ByteCount)
103 {
104 /*
105 * Final bit positions for the package length bytes:
106 * Byte3->[20:27]
107 * Byte2->[12:19]
108 * Byte1->[04:11]
109 * Byte0->[00:03]
110 */
111 PackageLength |= (Aml[ByteCount] << ((ByteCount << 3) - 4));
112
113 ByteZeroMask = 0x0F; /* Use bits [0:3] of byte 0 */
114 ByteCount--;
115 }
116
117 /* Byte 0 is a special case, either bits [0:3] or [0:5] are used */
118
119 PackageLength |= (Aml[0] & ByteZeroMask);
120 return_UINT32 (PackageLength);
121 }
122
123
124 /*******************************************************************************
125 *
126 * FUNCTION: AcpiPsGetNextPackageEnd
127 *
128 * PARAMETERS: ParserState - Current parser state object
129 *
130 * RETURN: Pointer to end-of-package +1
131 *
132 * DESCRIPTION: Get next package length and return a pointer past the end of
133 * the package. Consumes the package length field
134 *
135 ******************************************************************************/
136
137 UINT8 *
138 AcpiPsGetNextPackageEnd (
139 ACPI_PARSE_STATE *ParserState)
140 {
141 UINT8 *Start = ParserState->Aml;
142 UINT32 PackageLength;
143
144
145 ACPI_FUNCTION_TRACE (PsGetNextPackageEnd);
146
147
148 /* Function below updates ParserState->Aml */
149
150 PackageLength = AcpiPsGetNextPackageLength (ParserState);
151
152 return_PTR (Start + PackageLength); /* end of package */
153 }
154
155
156 /*******************************************************************************
157 *
158 * FUNCTION: AcpiPsGetNextNamestring
159 *
160 * PARAMETERS: ParserState - Current parser state object
161 *
162 * RETURN: Pointer to the start of the name string (pointer points into
163 * the AML.
164 *
165 * DESCRIPTION: Get next raw namestring within the AML stream. Handles all name
166 * prefix characters. Set parser state to point past the string.
167 * (Name is consumed from the AML.)
168 *
169 ******************************************************************************/
170
171 char *
172 AcpiPsGetNextNamestring (
173 ACPI_PARSE_STATE *ParserState)
174 {
175 UINT8 *Start = ParserState->Aml;
176 UINT8 *End = ParserState->Aml;
177
178
179 ACPI_FUNCTION_TRACE (PsGetNextNamestring);
180
181
182 /* Point past any namestring prefix characters (backslash or carat) */
183
184 while (ACPI_IS_ROOT_PREFIX (*End) ||
185 ACPI_IS_PARENT_PREFIX (*End))
186 {
187 End++;
188 }
189
190 /* Decode the path prefix character */
191
192 switch (*End)
193 {
194 case 0:
195
196 /* NullName */
197
198 if (End == Start)
199 {
200 Start = NULL;
201 }
202 End++;
203 break;
204
205 case AML_DUAL_NAME_PREFIX:
206
207 /* Two name segments */
208
209 End += 1 + (2 * ACPI_NAME_SIZE);
210 break;
211
212 case AML_MULTI_NAME_PREFIX:
213
214 /* Multiple name segments, 4 chars each, count in next byte */
215
216 End += 2 + (*(End + 1) * ACPI_NAME_SIZE);
217 break;
218
219 default:
220
221 /* Single name segment */
222
223 End += ACPI_NAME_SIZE;
224 break;
225 }
226
227 ParserState->Aml = End;
228 return_PTR ((char *) Start);
229 }
230
231
232 /*******************************************************************************
233 *
234 * FUNCTION: AcpiPsGetNextNamepath
235 *
236 * PARAMETERS: ParserState - Current parser state object
237 * Arg - Where the namepath will be stored
238 * ArgCount - If the namepath points to a control method
239 * the method's argument is returned here.
240 * PossibleMethodCall - Whether the namepath can possibly be the
241 * start of a method call
242 *
243 * RETURN: Status
244 *
245 * DESCRIPTION: Get next name (if method call, return # of required args).
246 * Names are looked up in the internal namespace to determine
247 * if the name represents a control method. If a method
248 * is found, the number of arguments to the method is returned.
249 * This information is critical for parsing to continue correctly.
250 *
251 ******************************************************************************/
252
253 ACPI_STATUS
254 AcpiPsGetNextNamepath (
255 ACPI_WALK_STATE *WalkState,
256 ACPI_PARSE_STATE *ParserState,
257 ACPI_PARSE_OBJECT *Arg,
258 BOOLEAN PossibleMethodCall)
259 {
260 ACPI_STATUS Status;
261 char *Path;
262 ACPI_PARSE_OBJECT *NameOp;
263 ACPI_OPERAND_OBJECT *MethodDesc;
264 ACPI_NAMESPACE_NODE *Node;
265 UINT8 *Start = ParserState->Aml;
266
267
268 ACPI_FUNCTION_TRACE (PsGetNextNamepath);
269
270
271 Path = AcpiPsGetNextNamestring (ParserState);
272 AcpiPsInitOp (Arg, AML_INT_NAMEPATH_OP);
273
274 /* Null path case is allowed, just exit */
275
276 if (!Path)
277 {
278 Arg->Common.Value.Name = Path;
279 return_ACPI_STATUS (AE_OK);
280 }
281
282 /*
283 * Lookup the name in the internal namespace, starting with the current
284 * scope. We don't want to add anything new to the namespace here,
285 * however, so we use MODE_EXECUTE.
286 * Allow searching of the parent tree, but don't open a new scope -
287 * we just want to lookup the object (must be mode EXECUTE to perform
288 * the upsearch)
289 */
290 Status = AcpiNsLookup (WalkState->ScopeInfo, Path,
291 ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
292 ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE, NULL, &Node);
293
294 /*
295 * If this name is a control method invocation, we must
296 * setup the method call
297 */
298 if (ACPI_SUCCESS (Status) &&
299 PossibleMethodCall &&
300 (Node->Type == ACPI_TYPE_METHOD))
301 {
302 if ((GET_CURRENT_ARG_TYPE (WalkState->ArgTypes) == ARGP_SUPERNAME) ||
303 (GET_CURRENT_ARG_TYPE (WalkState->ArgTypes) == ARGP_TARGET))
304 {
305 /*
306 * AcpiPsGetNextNamestring has increased the AML pointer past
307 * the method invocation namestring, so we need to restore the
308 * saved AML pointer back to the original method invocation
309 * namestring.
310 */
311 WalkState->ParserState.Aml = Start;
312 WalkState->ArgCount = 1;
313 AcpiPsInitOp (Arg, AML_INT_METHODCALL_OP);
314 }
315
316 /* This name is actually a control method invocation */
317
318 MethodDesc = AcpiNsGetAttachedObject (Node);
319 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
320 "Control Method invocation %4.4s - %p Desc %p Path=%p\n",
321 Node->Name.Ascii, Node, MethodDesc, Path));
322
323 NameOp = AcpiPsAllocOp (AML_INT_NAMEPATH_OP, Start);
324 if (!NameOp)
325 {
326 return_ACPI_STATUS (AE_NO_MEMORY);
327 }
328
329 /* Change Arg into a METHOD CALL and attach name to it */
330
331 AcpiPsInitOp (Arg, AML_INT_METHODCALL_OP);
332 NameOp->Common.Value.Name = Path;
333
334 /* Point METHODCALL/NAME to the METHOD Node */
335
336 NameOp->Common.Node = Node;
337 AcpiPsAppendArg (Arg, NameOp);
338
339 if (!MethodDesc)
340 {
341 ACPI_ERROR ((AE_INFO,
342 "Control Method %p has no attached object",
343 Node));
344 return_ACPI_STATUS (AE_AML_INTERNAL);
345 }
346
347 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
348 "Control Method - %p Args %X\n",
349 Node, MethodDesc->Method.ParamCount));
350
351 /* Get the number of arguments to expect */
352
353 WalkState->ArgCount = MethodDesc->Method.ParamCount;
354 return_ACPI_STATUS (AE_OK);
355 }
356
357 /*
358 * Special handling if the name was not found during the lookup -
359 * some NotFound cases are allowed
360 */
361 if (Status == AE_NOT_FOUND)
362 {
363 /* 1) NotFound is ok during load pass 1/2 (allow forward references) */
364
365 if ((WalkState->ParseFlags & ACPI_PARSE_MODE_MASK) !=
366 ACPI_PARSE_EXECUTE)
367 {
368 Status = AE_OK;
369 }
370
371 /* 2) NotFound during a CondRefOf(x) is ok by definition */
372
373 else if (WalkState->Op->Common.AmlOpcode == AML_CONDITIONAL_REF_OF_OP)
374 {
375 Status = AE_OK;
376 }
377
378 /*
379 * 3) NotFound while building a Package is ok at this point, we
380 * may flag as an error later if slack mode is not enabled.
381 * (Some ASL code depends on allowing this behavior)
382 */
383 else if ((Arg->Common.Parent) &&
384 ((Arg->Common.Parent->Common.AmlOpcode == AML_PACKAGE_OP) ||
385 (Arg->Common.Parent->Common.AmlOpcode == AML_VARIABLE_PACKAGE_OP)))
386 {
387 Status = AE_OK;
388 }
389 }
390
391 /* Final exception check (may have been changed from code above) */
392
393 if (ACPI_FAILURE (Status))
394 {
395 ACPI_ERROR_NAMESPACE (WalkState->ScopeInfo, Path, Status);
396
397 if ((WalkState->ParseFlags & ACPI_PARSE_MODE_MASK) ==
398 ACPI_PARSE_EXECUTE)
399 {
400 /* Report a control method execution error */
401
402 Status = AcpiDsMethodError (Status, WalkState);
403 }
404 }
405
406 /* Save the namepath */
407
408 Arg->Common.Value.Name = Path;
409 return_ACPI_STATUS (Status);
410 }
411
412
413 /*******************************************************************************
414 *
415 * FUNCTION: AcpiPsGetNextSimpleArg
416 *
417 * PARAMETERS: ParserState - Current parser state object
418 * ArgType - The argument type (AML_*_ARG)
419 * Arg - Where the argument is returned
420 *
421 * RETURN: None
422 *
423 * DESCRIPTION: Get the next simple argument (constant, string, or namestring)
424 *
425 ******************************************************************************/
426
427 void
428 AcpiPsGetNextSimpleArg (
429 ACPI_PARSE_STATE *ParserState,
430 UINT32 ArgType,
431 ACPI_PARSE_OBJECT *Arg)
432 {
433 UINT32 Length;
434 UINT16 Opcode;
435 UINT8 *Aml = ParserState->Aml;
436
437
438 ACPI_FUNCTION_TRACE_U32 (PsGetNextSimpleArg, ArgType);
439
440
441 switch (ArgType)
442 {
443 case ARGP_BYTEDATA:
444
445 /* Get 1 byte from the AML stream */
446
447 Opcode = AML_BYTE_OP;
448 Arg->Common.Value.Integer = (UINT64) *Aml;
449 Length = 1;
450 break;
451
452 case ARGP_WORDDATA:
453
454 /* Get 2 bytes from the AML stream */
455
456 Opcode = AML_WORD_OP;
457 ACPI_MOVE_16_TO_64 (&Arg->Common.Value.Integer, Aml);
458 Length = 2;
459 break;
460
461 case ARGP_DWORDDATA:
462
463 /* Get 4 bytes from the AML stream */
464
465 Opcode = AML_DWORD_OP;
466 ACPI_MOVE_32_TO_64 (&Arg->Common.Value.Integer, Aml);
467 Length = 4;
468 break;
469
470 case ARGP_QWORDDATA:
471
472 /* Get 8 bytes from the AML stream */
473
474 Opcode = AML_QWORD_OP;
475 ACPI_MOVE_64_TO_64 (&Arg->Common.Value.Integer, Aml);
476 Length = 8;
477 break;
478
479 case ARGP_CHARLIST:
480
481 /* Get a pointer to the string, point past the string */
482
483 Opcode = AML_STRING_OP;
484 Arg->Common.Value.String = ACPI_CAST_PTR (char, Aml);
485
486 /* Find the null terminator */
487
488 Length = 0;
489 while (Aml[Length])
490 {
491 Length++;
492 }
493 Length++;
494 break;
495
496 case ARGP_NAME:
497 case ARGP_NAMESTRING:
498
499 AcpiPsInitOp (Arg, AML_INT_NAMEPATH_OP);
500 Arg->Common.Value.Name = AcpiPsGetNextNamestring (ParserState);
501 return_VOID;
502
503 default:
504
505 ACPI_ERROR ((AE_INFO, "Invalid ArgType 0x%X", ArgType));
506 return_VOID;
507 }
508
509 AcpiPsInitOp (Arg, Opcode);
510 ParserState->Aml += Length;
511 return_VOID;
512 }
513
514
515 /*******************************************************************************
516 *
517 * FUNCTION: AcpiPsGetNextField
518 *
519 * PARAMETERS: ParserState - Current parser state object
520 *
521 * RETURN: A newly allocated FIELD op
522 *
523 * DESCRIPTION: Get next field (NamedField, ReservedField, or AccessField)
524 *
525 ******************************************************************************/
526
527 static ACPI_PARSE_OBJECT *
528 AcpiPsGetNextField (
529 ACPI_PARSE_STATE *ParserState)
530 {
531 UINT8 *Aml;
532 ACPI_PARSE_OBJECT *Field;
533 ACPI_PARSE_OBJECT *Arg = NULL;
534 UINT16 Opcode;
535 UINT32 Name;
536 UINT8 AccessType;
537 UINT8 AccessAttribute;
538 UINT8 AccessLength;
539 UINT32 PkgLength;
540 UINT8 *PkgEnd;
541 UINT32 BufferLength;
542
543
544 ACPI_FUNCTION_TRACE (PsGetNextField);
545
546
547 ASL_CV_CAPTURE_COMMENTS_ONLY (ParserState);
548 Aml = ParserState->Aml;
549
550 /* Determine field type */
551
552 switch (ACPI_GET8 (ParserState->Aml))
553 {
554 case AML_FIELD_OFFSET_OP:
555
556 Opcode = AML_INT_RESERVEDFIELD_OP;
557 ParserState->Aml++;
558 break;
559
560 case AML_FIELD_ACCESS_OP:
561
562 Opcode = AML_INT_ACCESSFIELD_OP;
563 ParserState->Aml++;
564 break;
565
566 case AML_FIELD_CONNECTION_OP:
567
568 Opcode = AML_INT_CONNECTION_OP;
569 ParserState->Aml++;
570 break;
571
572 case AML_FIELD_EXT_ACCESS_OP:
573
574 Opcode = AML_INT_EXTACCESSFIELD_OP;
575 ParserState->Aml++;
576 break;
577
578 default:
579
580 Opcode = AML_INT_NAMEDFIELD_OP;
581 break;
582 }
583
584 /* Allocate a new field op */
585
586 Field = AcpiPsAllocOp (Opcode, Aml);
587 if (!Field)
588 {
589 return_PTR (NULL);
590 }
591
592 /* Decode the field type */
593
594 ASL_CV_CAPTURE_COMMENTS_ONLY (ParserState);
595 switch (Opcode)
596 {
597 case AML_INT_NAMEDFIELD_OP:
598
599 /* Get the 4-character name */
600
601 ACPI_MOVE_32_TO_32 (&Name, ParserState->Aml);
602 AcpiPsSetName (Field, Name);
603 ParserState->Aml += ACPI_NAME_SIZE;
604
605
606 ASL_CV_CAPTURE_COMMENTS_ONLY (ParserState);
607
608 #ifdef ACPI_ASL_COMPILER
609 /*
610 * Because the package length isn't represented as a parse tree object,
611 * take comments surrounding this and add to the previously created
612 * parse node.
613 */
614 if (Field->Common.InlineComment)
615 {
616 Field->Common.NameComment = Field->Common.InlineComment;
617 }
618 Field->Common.InlineComment = AcpiGbl_CurrentInlineComment;
619 AcpiGbl_CurrentInlineComment = NULL;
620 #endif
621
622 /* Get the length which is encoded as a package length */
623
624 Field->Common.Value.Size = AcpiPsGetNextPackageLength (ParserState);
625 break;
626
627
628 case AML_INT_RESERVEDFIELD_OP:
629
630 /* Get the length which is encoded as a package length */
631
632 Field->Common.Value.Size = AcpiPsGetNextPackageLength (ParserState);
633 break;
634
635
636 case AML_INT_ACCESSFIELD_OP:
637 case AML_INT_EXTACCESSFIELD_OP:
638
639 /*
640 * Get AccessType and AccessAttrib and merge into the field Op
641 * AccessType is first operand, AccessAttribute is second. stuff
642 * these bytes into the node integer value for convenience.
643 */
644
645 /* Get the two bytes (Type/Attribute) */
646
647 AccessType = ACPI_GET8 (ParserState->Aml);
648 ParserState->Aml++;
649 AccessAttribute = ACPI_GET8 (ParserState->Aml);
650 ParserState->Aml++;
651
652 Field->Common.Value.Integer = (UINT8) AccessType;
653 Field->Common.Value.Integer |= (UINT16) (AccessAttribute << 8);
654
655 /* This opcode has a third byte, AccessLength */
656
657 if (Opcode == AML_INT_EXTACCESSFIELD_OP)
658 {
659 AccessLength = ACPI_GET8 (ParserState->Aml);
660 ParserState->Aml++;
661
662 Field->Common.Value.Integer |= (UINT32) (AccessLength << 16);
663 }
664 break;
665
666
667 case AML_INT_CONNECTION_OP:
668
669 /*
670 * Argument for Connection operator can be either a Buffer
671 * (resource descriptor), or a NameString.
672 */
673 Aml = ParserState->Aml;
674 if (ACPI_GET8 (ParserState->Aml) == AML_BUFFER_OP)
675 {
676 ParserState->Aml++;
677
678 ASL_CV_CAPTURE_COMMENTS_ONLY (ParserState);
679 PkgEnd = ParserState->Aml;
680 PkgLength = AcpiPsGetNextPackageLength (ParserState);
681 PkgEnd += PkgLength;
682
683 ASL_CV_CAPTURE_COMMENTS_ONLY (ParserState);
684 if (ParserState->Aml < PkgEnd)
685 {
686 /* Non-empty list */
687
688 Arg = AcpiPsAllocOp (AML_INT_BYTELIST_OP, Aml);
689 if (!Arg)
690 {
691 AcpiPsFreeOp (Field);
692 return_PTR (NULL);
693 }
694
695 /* Get the actual buffer length argument */
696
697 Opcode = ACPI_GET8 (ParserState->Aml);
698 ParserState->Aml++;
699
700 ASL_CV_CAPTURE_COMMENTS_ONLY (ParserState);
701 switch (Opcode)
702 {
703 case AML_BYTE_OP: /* AML_BYTEDATA_ARG */
704
705 BufferLength = ACPI_GET8 (ParserState->Aml);
706 ParserState->Aml += 1;
707 break;
708
709 case AML_WORD_OP: /* AML_WORDDATA_ARG */
710
711 BufferLength = ACPI_GET16 (ParserState->Aml);
712 ParserState->Aml += 2;
713 break;
714
715 case AML_DWORD_OP: /* AML_DWORDATA_ARG */
716
717 BufferLength = ACPI_GET32 (ParserState->Aml);
718 ParserState->Aml += 4;
719 break;
720
721 default:
722
723 BufferLength = 0;
724 break;
725 }
726
727 /* Fill in bytelist data */
728
729 ASL_CV_CAPTURE_COMMENTS_ONLY (ParserState);
730 Arg->Named.Value.Size = BufferLength;
731 Arg->Named.Data = ParserState->Aml;
732 }
733
734 /* Skip to End of byte data */
735
736 ParserState->Aml = PkgEnd;
737 }
738 else
739 {
740 Arg = AcpiPsAllocOp (AML_INT_NAMEPATH_OP, Aml);
741 if (!Arg)
742 {
743 AcpiPsFreeOp (Field);
744 return_PTR (NULL);
745 }
746
747 /* Get the Namestring argument */
748
749 Arg->Common.Value.Name = AcpiPsGetNextNamestring (ParserState);
750 }
751
752 /* Link the buffer/namestring to parent (CONNECTION_OP) */
753
754 AcpiPsAppendArg (Field, Arg);
755 break;
756
757
758 default:
759
760 /* Opcode was set in previous switch */
761 break;
762 }
763
764 return_PTR (Field);
765 }
766
767
768 /*******************************************************************************
769 *
770 * FUNCTION: AcpiPsGetNextArg
771 *
772 * PARAMETERS: WalkState - Current state
773 * ParserState - Current parser state object
774 * ArgType - The argument type (AML_*_ARG)
775 * ReturnArg - Where the next arg is returned
776 *
777 * RETURN: Status, and an op object containing the next argument.
778 *
779 * DESCRIPTION: Get next argument (including complex list arguments that require
780 * pushing the parser stack)
781 *
782 ******************************************************************************/
783
784 ACPI_STATUS
785 AcpiPsGetNextArg (
786 ACPI_WALK_STATE *WalkState,
787 ACPI_PARSE_STATE *ParserState,
788 UINT32 ArgType,
789 ACPI_PARSE_OBJECT **ReturnArg)
790 {
791 ACPI_PARSE_OBJECT *Arg = NULL;
792 ACPI_PARSE_OBJECT *Prev = NULL;
793 ACPI_PARSE_OBJECT *Field;
794 UINT32 Subop;
795 ACPI_STATUS Status = AE_OK;
796
797
798 ACPI_FUNCTION_TRACE_PTR (PsGetNextArg, ParserState);
799
800
801 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
802 "Expected argument type ARGP: %s (%2.2X)\n",
803 AcpiUtGetArgumentTypeName (ArgType), ArgType));
804
805 switch (ArgType)
806 {
807 case ARGP_BYTEDATA:
808 case ARGP_WORDDATA:
809 case ARGP_DWORDDATA:
810 case ARGP_CHARLIST:
811 case ARGP_NAME:
812 case ARGP_NAMESTRING:
813
814 /* Constants, strings, and namestrings are all the same size */
815
816 Arg = AcpiPsAllocOp (AML_BYTE_OP, ParserState->Aml);
817 if (!Arg)
818 {
819 return_ACPI_STATUS (AE_NO_MEMORY);
820 }
821
822 AcpiPsGetNextSimpleArg (ParserState, ArgType, Arg);
823 break;
824
825 case ARGP_PKGLENGTH:
826
827 /* Package length, nothing returned */
828
829 ParserState->PkgEnd = AcpiPsGetNextPackageEnd (ParserState);
830 break;
831
832 case ARGP_FIELDLIST:
833
834 if (ParserState->Aml < ParserState->PkgEnd)
835 {
836 /* Non-empty list */
837
838 while (ParserState->Aml < ParserState->PkgEnd)
839 {
840 Field = AcpiPsGetNextField (ParserState);
841 if (!Field)
842 {
843 return_ACPI_STATUS (AE_NO_MEMORY);
844 }
845
846 if (Prev)
847 {
848 Prev->Common.Next = Field;
849 }
850 else
851 {
852 Arg = Field;
853 }
854 Prev = Field;
855 }
856
857 /* Skip to End of byte data */
858
859 ParserState->Aml = ParserState->PkgEnd;
860 }
861 break;
862
863 case ARGP_BYTELIST:
864
865 if (ParserState->Aml < ParserState->PkgEnd)
866 {
867 /* Non-empty list */
868
869 Arg = AcpiPsAllocOp (AML_INT_BYTELIST_OP,
870 ParserState->Aml);
871 if (!Arg)
872 {
873 return_ACPI_STATUS (AE_NO_MEMORY);
874 }
875
876 /* Fill in bytelist data */
877
878 Arg->Common.Value.Size = (UINT32)
879 ACPI_PTR_DIFF (ParserState->PkgEnd, ParserState->Aml);
880 Arg->Named.Data = ParserState->Aml;
881
882 /* Skip to End of byte data */
883
884 ParserState->Aml = ParserState->PkgEnd;
885 }
886 break;
887
888 case ARGP_SIMPLENAME:
889 case ARGP_NAME_OR_REF:
890
891 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
892 "**** SimpleName/NameOrRef: %s (%2.2X)\n",
893 AcpiUtGetArgumentTypeName (ArgType), ArgType));
894
895 Subop = AcpiPsPeekOpcode (ParserState);
896 if (Subop == 0 ||
897 AcpiPsIsLeadingChar (Subop) ||
898 ACPI_IS_ROOT_PREFIX (Subop) ||
899 ACPI_IS_PARENT_PREFIX (Subop))
900 {
901 /* NullName or NameString */
902
903 Arg = AcpiPsAllocOp (AML_INT_NAMEPATH_OP, ParserState->Aml);
904 if (!Arg)
905 {
906 return_ACPI_STATUS (AE_NO_MEMORY);
907 }
908
909 Status = AcpiPsGetNextNamepath (WalkState, ParserState,
910 Arg, ACPI_NOT_METHOD_CALL);
911 }
912 else
913 {
914 /* Single complex argument, nothing returned */
915
916 WalkState->ArgCount = 1;
917 }
918 break;
919
920 case ARGP_TARGET:
921 case ARGP_SUPERNAME:
922
923 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
924 "**** Target/Supername: %s (%2.2X)\n",
925 AcpiUtGetArgumentTypeName (ArgType), ArgType));
926
927 Subop = AcpiPsPeekOpcode (ParserState);
928 if (Subop == 0 ||
929 AcpiPsIsLeadingChar (Subop) ||
930 ACPI_IS_ROOT_PREFIX (Subop) ||
931 ACPI_IS_PARENT_PREFIX (Subop))
932 {
933 /* NULL target (zero). Convert to a NULL namepath */
934
935 Arg = AcpiPsAllocOp (AML_INT_NAMEPATH_OP, ParserState->Aml);
936 if (!Arg)
937 {
938 return_ACPI_STATUS (AE_NO_MEMORY);
939 }
940
941 Status = AcpiPsGetNextNamepath (WalkState, ParserState,
942 Arg, ACPI_POSSIBLE_METHOD_CALL);
943
944 if (Arg->Common.AmlOpcode == AML_INT_METHODCALL_OP)
945 {
946 /* Free method call op and corresponding namestring sub-ob */
947
948 AcpiPsFreeOp (Arg->Common.Value.Arg);
949 AcpiPsFreeOp (Arg);
950 Arg = NULL;
951 WalkState->ArgCount = 1;
952 }
953 }
954 else
955 {
956 /* Single complex argument, nothing returned */
957
958 WalkState->ArgCount = 1;
959 }
960 break;
961
962 case ARGP_DATAOBJ:
963 case ARGP_TERMARG:
964
965 ACPI_DEBUG_PRINT ((ACPI_DB_PARSE,
966 "**** TermArg/DataObj: %s (%2.2X)\n",
967 AcpiUtGetArgumentTypeName (ArgType), ArgType));
968
969 /* Single complex argument, nothing returned */
970
971 WalkState->ArgCount = 1;
972 break;
973
974 case ARGP_DATAOBJLIST:
975 case ARGP_TERMLIST:
976 case ARGP_OBJLIST:
977
978 if (ParserState->Aml < ParserState->PkgEnd)
979 {
980 /* Non-empty list of variable arguments, nothing returned */
981
982 WalkState->ArgCount = ACPI_VAR_ARGS;
983 }
984 break;
985
986 default:
987
988 ACPI_ERROR ((AE_INFO, "Invalid ArgType: 0x%X", ArgType));
989 Status = AE_AML_OPERAND_TYPE;
990 break;
991 }
992
993 *ReturnArg = Arg;
994 return_ACPI_STATUS (Status);
995 }