2bb1801d5bd23c76bc31a4a29418dc54dfb08258
[reactos.git] / drivers / bus / acpi / acpica / utilities / uttrack.c
1 /******************************************************************************
2 *
3 * Module Name: uttrack - Memory allocation tracking routines (debug only)
4 *
5 *****************************************************************************/
6
7 /*
8 * Copyright (C) 2000 - 2017, Intel Corp.
9 * All rights reserved.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
13 * are met:
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
25 *
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
29 *
30 * NO WARRANTY
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
42 */
43
44 /*
45 * These procedures are used for tracking memory leaks in the subsystem, and
46 * they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set.
47 *
48 * Each memory allocation is tracked via a doubly linked list. Each
49 * element contains the caller's component, module name, function name, and
50 * line number. AcpiUtAllocate and AcpiUtAllocateZeroed call
51 * AcpiUtTrackAllocation to add an element to the list; deletion
52 * occurs in the body of AcpiUtFree.
53 */
54
55 #include "acpi.h"
56 #include "accommon.h"
57
58 #ifdef ACPI_DBG_TRACK_ALLOCATIONS
59
60 #define _COMPONENT ACPI_UTILITIES
61 ACPI_MODULE_NAME ("uttrack")
62
63
64 /* Local prototypes */
65
66 static ACPI_DEBUG_MEM_BLOCK *
67 AcpiUtFindAllocation (
68 ACPI_DEBUG_MEM_BLOCK *Allocation);
69
70 static ACPI_STATUS
71 AcpiUtTrackAllocation (
72 ACPI_DEBUG_MEM_BLOCK *Address,
73 ACPI_SIZE Size,
74 UINT8 AllocType,
75 UINT32 Component,
76 const char *Module,
77 UINT32 Line);
78
79 static ACPI_STATUS
80 AcpiUtRemoveAllocation (
81 ACPI_DEBUG_MEM_BLOCK *Address,
82 UINT32 Component,
83 const char *Module,
84 UINT32 Line);
85
86
87 /*******************************************************************************
88 *
89 * FUNCTION: AcpiUtCreateList
90 *
91 * PARAMETERS: CacheName - Ascii name for the cache
92 * ObjectSize - Size of each cached object
93 * ReturnCache - Where the new cache object is returned
94 *
95 * RETURN: Status
96 *
97 * DESCRIPTION: Create a local memory list for tracking purposed
98 *
99 ******************************************************************************/
100
101 ACPI_STATUS
102 AcpiUtCreateList (
103 const char *ListName,
104 UINT16 ObjectSize,
105 ACPI_MEMORY_LIST **ReturnCache)
106 {
107 ACPI_MEMORY_LIST *Cache;
108
109
110 Cache = AcpiOsAllocateZeroed (sizeof (ACPI_MEMORY_LIST));
111 if (!Cache)
112 {
113 return (AE_NO_MEMORY);
114 }
115
116 Cache->ListName = ListName;
117 Cache->ObjectSize = ObjectSize;
118
119 *ReturnCache = Cache;
120 return (AE_OK);
121 }
122
123
124 /*******************************************************************************
125 *
126 * FUNCTION: AcpiUtAllocateAndTrack
127 *
128 * PARAMETERS: Size - Size of the allocation
129 * Component - Component type of caller
130 * Module - Source file name of caller
131 * Line - Line number of caller
132 *
133 * RETURN: Address of the allocated memory on success, NULL on failure.
134 *
135 * DESCRIPTION: The subsystem's equivalent of malloc.
136 *
137 ******************************************************************************/
138
139 void *
140 AcpiUtAllocateAndTrack (
141 ACPI_SIZE Size,
142 UINT32 Component,
143 const char *Module,
144 UINT32 Line)
145 {
146 ACPI_DEBUG_MEM_BLOCK *Allocation;
147 ACPI_STATUS Status;
148
149
150 /* Check for an inadvertent size of zero bytes */
151
152 if (!Size)
153 {
154 ACPI_WARNING ((Module, Line,
155 "Attempt to allocate zero bytes, allocating 1 byte"));
156 Size = 1;
157 }
158
159 Allocation = AcpiOsAllocate (Size + sizeof (ACPI_DEBUG_MEM_HEADER));
160 if (!Allocation)
161 {
162 /* Report allocation error */
163
164 ACPI_WARNING ((Module, Line,
165 "Could not allocate size %u", (UINT32) Size));
166
167 return (NULL);
168 }
169
170 Status = AcpiUtTrackAllocation (
171 Allocation, Size, ACPI_MEM_MALLOC, Component, Module, Line);
172 if (ACPI_FAILURE (Status))
173 {
174 AcpiOsFree (Allocation);
175 return (NULL);
176 }
177
178 AcpiGbl_GlobalList->TotalAllocated++;
179 AcpiGbl_GlobalList->TotalSize += (UINT32) Size;
180 AcpiGbl_GlobalList->CurrentTotalSize += (UINT32) Size;
181
182 if (AcpiGbl_GlobalList->CurrentTotalSize >
183 AcpiGbl_GlobalList->MaxOccupied)
184 {
185 AcpiGbl_GlobalList->MaxOccupied =
186 AcpiGbl_GlobalList->CurrentTotalSize;
187 }
188
189 return ((void *) &Allocation->UserSpace);
190 }
191
192
193 /*******************************************************************************
194 *
195 * FUNCTION: AcpiUtAllocateZeroedAndTrack
196 *
197 * PARAMETERS: Size - Size of the allocation
198 * Component - Component type of caller
199 * Module - Source file name of caller
200 * Line - Line number of caller
201 *
202 * RETURN: Address of the allocated memory on success, NULL on failure.
203 *
204 * DESCRIPTION: Subsystem equivalent of calloc.
205 *
206 ******************************************************************************/
207
208 void *
209 AcpiUtAllocateZeroedAndTrack (
210 ACPI_SIZE Size,
211 UINT32 Component,
212 const char *Module,
213 UINT32 Line)
214 {
215 ACPI_DEBUG_MEM_BLOCK *Allocation;
216 ACPI_STATUS Status;
217
218
219 /* Check for an inadvertent size of zero bytes */
220
221 if (!Size)
222 {
223 ACPI_WARNING ((Module, Line,
224 "Attempt to allocate zero bytes, allocating 1 byte"));
225 Size = 1;
226 }
227
228 Allocation = AcpiOsAllocateZeroed (
229 Size + sizeof (ACPI_DEBUG_MEM_HEADER));
230 if (!Allocation)
231 {
232 /* Report allocation error */
233
234 ACPI_ERROR ((Module, Line,
235 "Could not allocate size %u", (UINT32) Size));
236 return (NULL);
237 }
238
239 Status = AcpiUtTrackAllocation (Allocation, Size,
240 ACPI_MEM_CALLOC, Component, Module, Line);
241 if (ACPI_FAILURE (Status))
242 {
243 AcpiOsFree (Allocation);
244 return (NULL);
245 }
246
247 AcpiGbl_GlobalList->TotalAllocated++;
248 AcpiGbl_GlobalList->TotalSize += (UINT32) Size;
249 AcpiGbl_GlobalList->CurrentTotalSize += (UINT32) Size;
250
251 if (AcpiGbl_GlobalList->CurrentTotalSize >
252 AcpiGbl_GlobalList->MaxOccupied)
253 {
254 AcpiGbl_GlobalList->MaxOccupied =
255 AcpiGbl_GlobalList->CurrentTotalSize;
256 }
257
258 return ((void *) &Allocation->UserSpace);
259 }
260
261
262 /*******************************************************************************
263 *
264 * FUNCTION: AcpiUtFreeAndTrack
265 *
266 * PARAMETERS: Allocation - Address of the memory to deallocate
267 * Component - Component type of caller
268 * Module - Source file name of caller
269 * Line - Line number of caller
270 *
271 * RETURN: None
272 *
273 * DESCRIPTION: Frees the memory at Allocation
274 *
275 ******************************************************************************/
276
277 void
278 AcpiUtFreeAndTrack (
279 void *Allocation,
280 UINT32 Component,
281 const char *Module,
282 UINT32 Line)
283 {
284 ACPI_DEBUG_MEM_BLOCK *DebugBlock;
285 ACPI_STATUS Status;
286
287
288 ACPI_FUNCTION_TRACE_PTR (UtFree, Allocation);
289
290
291 if (NULL == Allocation)
292 {
293 ACPI_ERROR ((Module, Line,
294 "Attempt to delete a NULL address"));
295
296 return_VOID;
297 }
298
299 DebugBlock = ACPI_CAST_PTR (ACPI_DEBUG_MEM_BLOCK,
300 (((char *) Allocation) - sizeof (ACPI_DEBUG_MEM_HEADER)));
301
302 AcpiGbl_GlobalList->TotalFreed++;
303 AcpiGbl_GlobalList->CurrentTotalSize -= DebugBlock->Size;
304
305 Status = AcpiUtRemoveAllocation (DebugBlock, Component, Module, Line);
306 if (ACPI_FAILURE (Status))
307 {
308 ACPI_EXCEPTION ((AE_INFO, Status, "Could not free memory"));
309 }
310
311 AcpiOsFree (DebugBlock);
312 ACPI_DEBUG_PRINT ((ACPI_DB_ALLOCATIONS, "%p freed (block %p)\n",
313 Allocation, DebugBlock));
314 return_VOID;
315 }
316
317
318 /*******************************************************************************
319 *
320 * FUNCTION: AcpiUtFindAllocation
321 *
322 * PARAMETERS: Allocation - Address of allocated memory
323 *
324 * RETURN: Three cases:
325 * 1) List is empty, NULL is returned.
326 * 2) Element was found. Returns Allocation parameter.
327 * 3) Element was not found. Returns position where it should be
328 * inserted into the list.
329 *
330 * DESCRIPTION: Searches for an element in the global allocation tracking list.
331 * If the element is not found, returns the location within the
332 * list where the element should be inserted.
333 *
334 * Note: The list is ordered by larger-to-smaller addresses.
335 *
336 * This global list is used to detect memory leaks in ACPICA as
337 * well as other issues such as an attempt to release the same
338 * internal object more than once. Although expensive as far
339 * as cpu time, this list is much more helpful for finding these
340 * types of issues than using memory leak detectors outside of
341 * the ACPICA code.
342 *
343 ******************************************************************************/
344
345 static ACPI_DEBUG_MEM_BLOCK *
346 AcpiUtFindAllocation (
347 ACPI_DEBUG_MEM_BLOCK *Allocation)
348 {
349 ACPI_DEBUG_MEM_BLOCK *Element;
350
351
352 Element = AcpiGbl_GlobalList->ListHead;
353 if (!Element)
354 {
355 return (NULL);
356 }
357
358 /*
359 * Search for the address.
360 *
361 * Note: List is ordered by larger-to-smaller addresses, on the
362 * assumption that a new allocation usually has a larger address
363 * than previous allocations.
364 */
365 while (Element > Allocation)
366 {
367 /* Check for end-of-list */
368
369 if (!Element->Next)
370 {
371 return (Element);
372 }
373
374 Element = Element->Next;
375 }
376
377 if (Element == Allocation)
378 {
379 return (Element);
380 }
381
382 return (Element->Previous);
383 }
384
385
386 /*******************************************************************************
387 *
388 * FUNCTION: AcpiUtTrackAllocation
389 *
390 * PARAMETERS: Allocation - Address of allocated memory
391 * Size - Size of the allocation
392 * AllocType - MEM_MALLOC or MEM_CALLOC
393 * Component - Component type of caller
394 * Module - Source file name of caller
395 * Line - Line number of caller
396 *
397 * RETURN: Status
398 *
399 * DESCRIPTION: Inserts an element into the global allocation tracking list.
400 *
401 ******************************************************************************/
402
403 static ACPI_STATUS
404 AcpiUtTrackAllocation (
405 ACPI_DEBUG_MEM_BLOCK *Allocation,
406 ACPI_SIZE Size,
407 UINT8 AllocType,
408 UINT32 Component,
409 const char *Module,
410 UINT32 Line)
411 {
412 ACPI_MEMORY_LIST *MemList;
413 ACPI_DEBUG_MEM_BLOCK *Element;
414 ACPI_STATUS Status = AE_OK;
415
416
417 ACPI_FUNCTION_TRACE_PTR (UtTrackAllocation, Allocation);
418
419
420 if (AcpiGbl_DisableMemTracking)
421 {
422 return_ACPI_STATUS (AE_OK);
423 }
424
425 MemList = AcpiGbl_GlobalList;
426 Status = AcpiUtAcquireMutex (ACPI_MTX_MEMORY);
427 if (ACPI_FAILURE (Status))
428 {
429 return_ACPI_STATUS (Status);
430 }
431
432 /*
433 * Search the global list for this address to make sure it is not
434 * already present. This will catch several kinds of problems.
435 */
436 Element = AcpiUtFindAllocation (Allocation);
437 if (Element == Allocation)
438 {
439 ACPI_ERROR ((AE_INFO,
440 "UtTrackAllocation: Allocation (%p) already present in global list!",
441 Allocation));
442 goto UnlockAndExit;
443 }
444
445 /* Fill in the instance data */
446
447 Allocation->Size = (UINT32) Size;
448 Allocation->AllocType = AllocType;
449 Allocation->Component = Component;
450 Allocation->Line = Line;
451
452 strncpy (Allocation->Module, Module, ACPI_MAX_MODULE_NAME);
453 Allocation->Module[ACPI_MAX_MODULE_NAME-1] = 0;
454
455 if (!Element)
456 {
457 /* Insert at list head */
458
459 if (MemList->ListHead)
460 {
461 ((ACPI_DEBUG_MEM_BLOCK *)(MemList->ListHead))->Previous =
462 Allocation;
463 }
464
465 Allocation->Next = MemList->ListHead;
466 Allocation->Previous = NULL;
467
468 MemList->ListHead = Allocation;
469 }
470 else
471 {
472 /* Insert after element */
473
474 Allocation->Next = Element->Next;
475 Allocation->Previous = Element;
476
477 if (Element->Next)
478 {
479 (Element->Next)->Previous = Allocation;
480 }
481
482 Element->Next = Allocation;
483 }
484
485
486 UnlockAndExit:
487 Status = AcpiUtReleaseMutex (ACPI_MTX_MEMORY);
488 return_ACPI_STATUS (Status);
489 }
490
491
492 /*******************************************************************************
493 *
494 * FUNCTION: AcpiUtRemoveAllocation
495 *
496 * PARAMETERS: Allocation - Address of allocated memory
497 * Component - Component type of caller
498 * Module - Source file name of caller
499 * Line - Line number of caller
500 *
501 * RETURN: Status
502 *
503 * DESCRIPTION: Deletes an element from the global allocation tracking list.
504 *
505 ******************************************************************************/
506
507 static ACPI_STATUS
508 AcpiUtRemoveAllocation (
509 ACPI_DEBUG_MEM_BLOCK *Allocation,
510 UINT32 Component,
511 const char *Module,
512 UINT32 Line)
513 {
514 ACPI_MEMORY_LIST *MemList;
515 ACPI_STATUS Status;
516
517
518 ACPI_FUNCTION_NAME (UtRemoveAllocation);
519
520
521 if (AcpiGbl_DisableMemTracking)
522 {
523 return (AE_OK);
524 }
525
526 MemList = AcpiGbl_GlobalList;
527 if (NULL == MemList->ListHead)
528 {
529 /* No allocations! */
530
531 ACPI_ERROR ((Module, Line,
532 "Empty allocation list, nothing to free!"));
533
534 return (AE_OK);
535 }
536
537 Status = AcpiUtAcquireMutex (ACPI_MTX_MEMORY);
538 if (ACPI_FAILURE (Status))
539 {
540 return (Status);
541 }
542
543 /* Unlink */
544
545 if (Allocation->Previous)
546 {
547 (Allocation->Previous)->Next = Allocation->Next;
548 }
549 else
550 {
551 MemList->ListHead = Allocation->Next;
552 }
553
554 if (Allocation->Next)
555 {
556 (Allocation->Next)->Previous = Allocation->Previous;
557 }
558
559 ACPI_DEBUG_PRINT ((ACPI_DB_ALLOCATIONS, "Freeing %p, size 0%X\n",
560 &Allocation->UserSpace, Allocation->Size));
561
562 /* Mark the segment as deleted */
563
564 memset (&Allocation->UserSpace, 0xEA, Allocation->Size);
565
566 Status = AcpiUtReleaseMutex (ACPI_MTX_MEMORY);
567 return (Status);
568 }
569
570
571 /*******************************************************************************
572 *
573 * FUNCTION: AcpiUtDumpAllocationInfo
574 *
575 * PARAMETERS: None
576 *
577 * RETURN: None
578 *
579 * DESCRIPTION: Print some info about the outstanding allocations.
580 *
581 ******************************************************************************/
582
583 void
584 AcpiUtDumpAllocationInfo (
585 void)
586 {
587 /*
588 ACPI_MEMORY_LIST *MemList;
589 */
590
591 ACPI_FUNCTION_TRACE (UtDumpAllocationInfo);
592
593 /*
594 ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
595 ("%30s: %4d (%3d Kb)\n", "Current allocations",
596 MemList->CurrentCount,
597 ROUND_UP_TO_1K (MemList->CurrentSize)));
598
599 ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
600 ("%30s: %4d (%3d Kb)\n", "Max concurrent allocations",
601 MemList->MaxConcurrentCount,
602 ROUND_UP_TO_1K (MemList->MaxConcurrentSize)));
603
604
605 ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
606 ("%30s: %4d (%3d Kb)\n", "Total (all) internal objects",
607 RunningObjectCount,
608 ROUND_UP_TO_1K (RunningObjectSize)));
609
610 ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
611 ("%30s: %4d (%3d Kb)\n", "Total (all) allocations",
612 RunningAllocCount,
613 ROUND_UP_TO_1K (RunningAllocSize)));
614
615
616 ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
617 ("%30s: %4d (%3d Kb)\n", "Current Nodes",
618 AcpiGbl_CurrentNodeCount,
619 ROUND_UP_TO_1K (AcpiGbl_CurrentNodeSize)));
620
621 ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
622 ("%30s: %4d (%3d Kb)\n", "Max Nodes",
623 AcpiGbl_MaxConcurrentNodeCount,
624 ROUND_UP_TO_1K ((AcpiGbl_MaxConcurrentNodeCount *
625 sizeof (ACPI_NAMESPACE_NODE)))));
626 */
627 return_VOID;
628 }
629
630
631 /*******************************************************************************
632 *
633 * FUNCTION: AcpiUtDumpAllocations
634 *
635 * PARAMETERS: Component - Component(s) to dump info for.
636 * Module - Module to dump info for. NULL means all.
637 *
638 * RETURN: None
639 *
640 * DESCRIPTION: Print a list of all outstanding allocations.
641 *
642 ******************************************************************************/
643
644 void
645 AcpiUtDumpAllocations (
646 UINT32 Component,
647 const char *Module)
648 {
649 ACPI_DEBUG_MEM_BLOCK *Element;
650 ACPI_DESCRIPTOR *Descriptor;
651 UINT32 NumOutstanding = 0;
652 UINT8 DescriptorType;
653
654
655 ACPI_FUNCTION_TRACE (UtDumpAllocations);
656
657
658 if (AcpiGbl_DisableMemTracking)
659 {
660 return_VOID;
661 }
662
663 /*
664 * Walk the allocation list.
665 */
666 if (ACPI_FAILURE (AcpiUtAcquireMutex (ACPI_MTX_MEMORY)))
667 {
668 return_VOID;
669 }
670
671 if (!AcpiGbl_GlobalList)
672 {
673 goto Exit;
674 }
675
676 Element = AcpiGbl_GlobalList->ListHead;
677 while (Element)
678 {
679 if ((Element->Component & Component) &&
680 ((Module == NULL) || (0 == strcmp (Module, Element->Module))))
681 {
682 Descriptor = ACPI_CAST_PTR (
683 ACPI_DESCRIPTOR, &Element->UserSpace);
684
685 if (Element->Size < sizeof (ACPI_COMMON_DESCRIPTOR))
686 {
687 AcpiOsPrintf ("%p Length 0x%04X %9.9s-%4.4u "
688 "[Not a Descriptor - too small]\n",
689 Descriptor, Element->Size, Element->Module,
690 Element->Line);
691 }
692 else
693 {
694 /* Ignore allocated objects that are in a cache */
695
696 if (ACPI_GET_DESCRIPTOR_TYPE (Descriptor) !=
697 ACPI_DESC_TYPE_CACHED)
698 {
699 AcpiOsPrintf ("%p Length 0x%04X %9.9s-%4.4u [%s] ",
700 Descriptor, Element->Size, Element->Module,
701 Element->Line, AcpiUtGetDescriptorName (Descriptor));
702
703 /* Validate the descriptor type using Type field and length */
704
705 DescriptorType = 0; /* Not a valid descriptor type */
706
707 switch (ACPI_GET_DESCRIPTOR_TYPE (Descriptor))
708 {
709 case ACPI_DESC_TYPE_OPERAND:
710
711 if (Element->Size == sizeof (ACPI_OPERAND_OBJECT))
712 {
713 DescriptorType = ACPI_DESC_TYPE_OPERAND;
714 }
715 break;
716
717 case ACPI_DESC_TYPE_PARSER:
718
719 if (Element->Size == sizeof (ACPI_PARSE_OBJECT))
720 {
721 DescriptorType = ACPI_DESC_TYPE_PARSER;
722 }
723 break;
724
725 case ACPI_DESC_TYPE_NAMED:
726
727 if (Element->Size == sizeof (ACPI_NAMESPACE_NODE))
728 {
729 DescriptorType = ACPI_DESC_TYPE_NAMED;
730 }
731 break;
732
733 default:
734
735 break;
736 }
737
738 /* Display additional info for the major descriptor types */
739
740 switch (DescriptorType)
741 {
742 case ACPI_DESC_TYPE_OPERAND:
743
744 AcpiOsPrintf ("%12.12s RefCount 0x%04X\n",
745 AcpiUtGetTypeName (Descriptor->Object.Common.Type),
746 Descriptor->Object.Common.ReferenceCount);
747 break;
748
749 case ACPI_DESC_TYPE_PARSER:
750
751 AcpiOsPrintf ("AmlOpcode 0x%04hX\n",
752 Descriptor->Op.Asl.AmlOpcode);
753 break;
754
755 case ACPI_DESC_TYPE_NAMED:
756
757 AcpiOsPrintf ("%4.4s\n",
758 AcpiUtGetNodeName (&Descriptor->Node));
759 break;
760
761 default:
762
763 AcpiOsPrintf ( "\n");
764 break;
765 }
766 }
767 }
768
769 NumOutstanding++;
770 }
771
772 Element = Element->Next;
773 }
774
775 Exit:
776 (void) AcpiUtReleaseMutex (ACPI_MTX_MEMORY);
777
778 /* Print summary */
779
780 if (!NumOutstanding)
781 {
782 ACPI_INFO (("No outstanding allocations"));
783 }
784 else
785 {
786 ACPI_ERROR ((AE_INFO, "%u(0x%X) Outstanding allocations",
787 NumOutstanding, NumOutstanding));
788 }
789
790 return_VOID;
791 }
792
793 #endif /* ACPI_DBG_TRACK_ALLOCATIONS */