2 * PROJECT: ReactOS PCI Bus Driver
3 * LICENSE: BSD - See COPYING.ARM in the top level directory
4 * FILE: drivers/bus/pci/enum.c
5 * PURPOSE: PCI Bus/Device Enumeration
6 * PROGRAMMERS: ReactOS Portable Systems Group
9 /* INCLUDES *******************************************************************/
16 /* GLOBALS ********************************************************************/
18 PIO_RESOURCE_REQUIREMENTS_LIST PciZeroIoResourceRequirements
;
20 PCI_CONFIGURATOR PciConfigurators
[] =
23 Device_MassageHeaderForLimitsDetermination
,
24 Device_RestoreCurrent
,
26 Device_SaveCurrentSettings
,
27 Device_ChangeResourceSettings
,
28 Device_GetAdditionalResourceDescriptors
,
32 PPBridge_MassageHeaderForLimitsDetermination
,
33 PPBridge_RestoreCurrent
,
35 PPBridge_SaveCurrentSettings
,
36 PPBridge_ChangeResourceSettings
,
37 PPBridge_GetAdditionalResourceDescriptors
,
41 Cardbus_MassageHeaderForLimitsDetermination
,
42 Cardbus_RestoreCurrent
,
44 Cardbus_SaveCurrentSettings
,
45 Cardbus_ChangeResourceSettings
,
46 Cardbus_GetAdditionalResourceDescriptors
,
51 /* FUNCTIONS ******************************************************************/
55 PciComputeNewCurrentSettings(IN PPCI_PDO_EXTENSION PdoExtension
,
56 IN PCM_RESOURCE_LIST ResourceList
)
58 PCM_PARTIAL_RESOURCE_DESCRIPTOR Partial
, InterruptResource
;
59 PCM_PARTIAL_RESOURCE_DESCRIPTOR BaseResource
, CurrentDescriptor
;
60 PCM_PARTIAL_RESOURCE_DESCRIPTOR PreviousDescriptor
;
61 CM_PARTIAL_RESOURCE_DESCRIPTOR ResourceArray
[7];
62 PCM_FULL_RESOURCE_DESCRIPTOR FullList
;
63 BOOLEAN DrainPartial
, RangeChange
;
65 PPCI_FUNCTION_RESOURCES PciResources
;
68 /* Make sure we have either no resources, or at least one */
69 ASSERT((ResourceList
== NULL
) || (ResourceList
->Count
== 1));
71 /* Initialize no partial, interrupt descriptor, or range change */
73 InterruptResource
= NULL
;
76 /* Check if there's not actually any resources */
77 if (!(ResourceList
) || !(ResourceList
->Count
))
79 /* Then just return the hardware update state */
80 return PdoExtension
->UpdateHardware
;
83 /* Print the new specified resource list */
84 PciDebugPrintCmResList(ResourceList
);
86 /* Clear the temporary resource array */
87 for (i
= 0; i
< 7; i
++) ResourceArray
[i
].Type
= CmResourceTypeNull
;
89 /* Loop the full resource descriptor */
90 FullList
= ResourceList
->List
;
91 for (i
= 0; i
< ResourceList
->Count
; i
++)
93 /* Initialize loop variables */
97 /* Loop the partial descriptors */
98 Partial
= FullList
->PartialResourceList
.PartialDescriptors
;
99 for (j
= 0; j
< FullList
->PartialResourceList
.Count
; j
++)
101 /* Check if we were supposed to drain a partial due to device data */
104 /* Draining complete, move on to the next descriptor then */
109 /* Check what kind of descriptor this was */
110 switch (Partial
->Type
)
112 /* Base BAR resources */
113 case CmResourceTypePort
:
114 case CmResourceTypeMemory
:
116 /* Set it as the base */
117 ASSERT(BaseResource
== NULL
);
118 BaseResource
= Partial
;
121 /* Interrupt resource */
122 case CmResourceTypeInterrupt
:
124 /* Make sure it's a compatible (and the only) PCI interrupt */
125 ASSERT(InterruptResource
== NULL
);
126 ASSERT(Partial
->u
.Interrupt
.Level
== Partial
->u
.Interrupt
.Vector
);
127 InterruptResource
= Partial
;
129 /* Only 255 interrupts on x86/x64 hardware */
130 if (Partial
->u
.Interrupt
.Level
< 256)
132 /* Use the passed interrupt line */
133 PdoExtension
->AdjustedInterruptLine
= Partial
->u
.Interrupt
.Level
;
137 /* Invalid vector, so ignore it */
138 PdoExtension
->AdjustedInterruptLine
= 0;
143 /* Check for specific device data */
144 case CmResourceTypeDevicePrivate
:
146 /* Check what kind of data this was */
147 switch (Partial
->u
.DevicePrivate
.Data
[0])
149 /* Not used in the driver yet */
151 UNIMPLEMENTED_DBGBREAK();
154 /* Not used in the driver yet */
156 UNIMPLEMENTED_DBGBREAK();
159 /* A drain request */
161 /* Shouldn't be a base resource, this is a drain */
162 ASSERT(BaseResource
== NULL
);
163 DrainPartial
= Partial
->u
.DevicePrivate
.Data
[1];
164 ASSERT(DrainPartial
== TRUE
);
170 /* Move to the next descriptor */
171 Partial
= PciNextPartialDescriptor(Partial
);
174 /* We should be starting a new list now */
175 ASSERT(BaseResource
== NULL
);
176 FullList
= (PVOID
)Partial
;
179 /* Check the current assigned PCI resources */
180 PciResources
= PdoExtension
->Resources
;
181 if (!PciResources
) return FALSE
;
183 //if... // MISSING CODE
185 DPRINT1("Missing sanity checking code!\n");
187 /* Loop all the PCI function resources */
188 for (i
= 0; i
< 7; i
++)
190 /* Get the current function resource descriptor, and the new one */
191 CurrentDescriptor
= &PciResources
->Current
[i
];
192 Partial
= &ResourceArray
[i
];
194 /* Previous is current during the first loop iteration */
195 PreviousDescriptor
= &PciResources
->Current
[(i
== 0) ? (0) : (i
- 1)];
197 /* Check if this new descriptor is different than the old one */
198 if (((Partial
->Type
!= CurrentDescriptor
->Type
) ||
199 (Partial
->Type
!= CmResourceTypeNull
)) &&
200 ((Partial
->u
.Generic
.Start
.QuadPart
!=
201 CurrentDescriptor
->u
.Generic
.Start
.QuadPart
) ||
202 (Partial
->u
.Generic
.Length
!= CurrentDescriptor
->u
.Generic
.Length
)))
204 /* Record a change */
207 /* Was there a range before? */
208 if (CurrentDescriptor
->Type
!= CmResourceTypeNull
)
211 DbgPrint(" Old range-\n");
212 PciDebugPrintPartialResource(CurrentDescriptor
);
216 /* There was no range */
217 DbgPrint(" Previously unset range\n");
221 DbgPrint(" changed to\n");
222 PciDebugPrintPartialResource(Partial
);
224 /* Update to new range */
225 CurrentDescriptor
->Type
= Partial
->Type
;
226 PreviousDescriptor
->u
.Generic
.Start
= Partial
->u
.Generic
.Start
;
227 PreviousDescriptor
->u
.Generic
.Length
= Partial
->u
.Generic
.Length
;
228 CurrentDescriptor
= PreviousDescriptor
;
232 /* Either the hardware was updated, or a resource range changed */
233 return ((RangeChange
) || (PdoExtension
->UpdateHardware
));
238 PcipUpdateHardware(IN PVOID Context
,
241 PPCI_PDO_EXTENSION PdoExtension
= Context
;
242 PPCI_COMMON_HEADER PciData
= Context2
;
244 /* Check if we're allowed to disable decodes */
245 PciData
->Command
= PdoExtension
->CommandEnables
;
246 if (!(PdoExtension
->HackFlags
& PCI_HACK_PRESERVE_COMMAND
))
248 /* Disable all decodes */
249 PciData
->Command
&= ~(PCI_ENABLE_IO_SPACE
|
250 PCI_ENABLE_MEMORY_SPACE
|
251 PCI_ENABLE_BUS_MASTER
|
252 PCI_ENABLE_WRITE_AND_INVALIDATE
);
255 /* Update the device configuration */
257 PciWriteDeviceConfig(PdoExtension
, PciData
, 0, PCI_COMMON_HDR_LENGTH
);
259 /* Turn decodes back on */
260 PciDecodeEnable(PdoExtension
, TRUE
, &PdoExtension
->CommandEnables
);
265 PciUpdateHardware(IN PPCI_PDO_EXTENSION PdoExtension
,
266 IN PPCI_COMMON_HEADER PciData
)
268 PCI_IPI_CONTEXT Context
;
270 /* Check for critical devices and PCI Debugging devices */
271 if ((PdoExtension
->HackFlags
& PCI_HACK_CRITICAL_DEVICE
) ||
272 (PdoExtension
->OnDebugPath
))
274 /* Build the context and send an IPI */
275 Context
.RunCount
= 1;
277 Context
.Context
= PciData
;
278 Context
.Function
= PcipUpdateHardware
;
279 Context
.DeviceExtension
= PdoExtension
;
280 KeIpiGenericCall(PciExecuteCriticalSystemRoutine
, (ULONG_PTR
)&Context
);
284 /* Just to the update inline */
285 PcipUpdateHardware(PdoExtension
, PciData
);
289 PIO_RESOURCE_REQUIREMENTS_LIST
291 PciAllocateIoRequirementsList(IN ULONG Count
,
296 PIO_RESOURCE_REQUIREMENTS_LIST RequirementsList
;
298 /* Calculate the final size of the list, including each descriptor */
299 Size
= sizeof(IO_RESOURCE_REQUIREMENTS_LIST
);
300 if (Count
> 1) Size
= sizeof(IO_RESOURCE_DESCRIPTOR
) * (Count
- 1) +
301 sizeof(IO_RESOURCE_REQUIREMENTS_LIST
);
303 /* Allocate the list */
304 RequirementsList
= ExAllocatePoolWithTag(PagedPool
, Size
, 'BicP');
305 if (!RequirementsList
) return NULL
;
308 RtlZeroMemory(RequirementsList
, Size
);
309 RequirementsList
->AlternativeLists
= 1;
310 RequirementsList
->BusNumber
= BusNumber
;
311 RequirementsList
->SlotNumber
= SlotNumber
;
312 RequirementsList
->InterfaceType
= PCIBus
;
313 RequirementsList
->ListSize
= Size
;
314 RequirementsList
->List
[0].Count
= Count
;
315 RequirementsList
->List
[0].Version
= 1;
316 RequirementsList
->List
[0].Revision
= 1;
319 return RequirementsList
;
324 PciAllocateCmResourceList(IN ULONG Count
,
328 PCM_RESOURCE_LIST ResourceList
;
330 /* Calculate the final size of the list, including each descriptor */
331 Size
= sizeof(CM_RESOURCE_LIST
);
332 if (Count
> 1) Size
= sizeof(CM_PARTIAL_RESOURCE_DESCRIPTOR
) * (Count
- 1) +
333 sizeof(CM_RESOURCE_LIST
);
335 /* Allocate the list */
336 ResourceList
= ExAllocatePoolWithTag(PagedPool
, Size
, 'BicP');
337 if (!ResourceList
) return NULL
;
340 RtlZeroMemory(ResourceList
, Size
);
341 ResourceList
->Count
= 1;
342 ResourceList
->List
[0].BusNumber
= BusNumber
;
343 ResourceList
->List
[0].InterfaceType
= PCIBus
;
344 ResourceList
->List
[0].PartialResourceList
.Version
= 1;
345 ResourceList
->List
[0].PartialResourceList
.Revision
= 1;
346 ResourceList
->List
[0].PartialResourceList
.Count
= Count
;
354 PciQueryResources(IN PPCI_PDO_EXTENSION PdoExtension
,
355 OUT PCM_RESOURCE_LIST
*Buffer
)
357 PPCI_FUNCTION_RESOURCES PciResources
;
358 BOOLEAN HaveVga
, HaveMemSpace
, HaveIoSpace
;
359 USHORT BridgeControl
, PciCommand
;
361 PCM_PARTIAL_RESOURCE_DESCRIPTOR Partial
, Resource
, LastResource
;
362 PCM_RESOURCE_LIST ResourceList
;
371 /* Make sure there's some resources to query */
372 PciResources
= PdoExtension
->Resources
;
373 if (!PciResources
) return STATUS_SUCCESS
;
375 /* Read the decodes */
376 PciReadDeviceConfig(PdoExtension
,
378 FIELD_OFFSET(PCI_COMMON_HEADER
, Command
),
381 /* Check which ones are turned on */
382 HaveIoSpace
= PciCommand
& PCI_ENABLE_IO_SPACE
;
383 HaveMemSpace
= PciCommand
& PCI_ENABLE_MEMORY_SPACE
;
385 /* Loop maximum possible descriptors */
386 for (i
= 0; i
< 7; i
++)
388 /* Check if the decode for this descriptor is actually turned on */
389 Partial
= &PciResources
->Current
[i
];
390 if (((HaveMemSpace
) && (Partial
->Type
== CmResourceTypeMemory
)) ||
391 ((HaveIoSpace
) && (Partial
->Type
== CmResourceTypePort
)))
393 /* One more fully active descriptor */
398 /* If there's an interrupt pin associated, check at least one decode is on */
399 if ((PdoExtension
->InterruptPin
) && ((HaveMemSpace
) || (HaveIoSpace
)))
401 /* Read the interrupt line for the pin, add a descriptor if it's valid */
402 InterruptLine
= PdoExtension
->AdjustedInterruptLine
;
403 if ((InterruptLine
) && (InterruptLine
!= -1)) Count
++;
406 /* Check for PCI bridge */
407 if (PdoExtension
->HeaderType
== PCI_BRIDGE_TYPE
)
409 /* Read bridge settings, check if VGA is present */
410 PciReadDeviceConfig(PdoExtension
,
412 FIELD_OFFSET(PCI_COMMON_HEADER
, u
.type1
.BridgeControl
),
414 if (BridgeControl
& PCI_ENABLE_BRIDGE_VGA
)
416 /* Remember for later */
419 /* One memory descriptor for 0xA0000, plus the two I/O port ranges */
420 if (HaveMemSpace
) Count
++;
421 if (HaveIoSpace
) Count
+= 2;
425 /* If there's no descriptors in use, there's no resources, so return */
426 if (!Count
) return STATUS_SUCCESS
;
428 /* Allocate a resource list to hold the resources */
429 ResourceList
= PciAllocateCmResourceList(Count
,
430 PdoExtension
->ParentFdoExtension
->BaseBus
);
431 if (!ResourceList
) return STATUS_INSUFFICIENT_RESOURCES
;
433 /* This is where the descriptors will be copied into */
434 Resource
= ResourceList
->List
[0].PartialResourceList
.PartialDescriptors
;
435 LastResource
= Resource
+ Count
+ 1;
437 /* Loop maximum possible descriptors */
438 for (i
= 0; i
< 7; i
++)
440 /* Check if the decode for this descriptor is actually turned on */
441 Partial
= &PciResources
->Current
[i
];
442 if (((HaveMemSpace
) && (Partial
->Type
== CmResourceTypeMemory
)) ||
443 ((HaveIoSpace
) && (Partial
->Type
== CmResourceTypePort
)))
445 /* Copy the descriptor into the resource list */
446 *Resource
++ = *Partial
;
450 /* Check if earlier the code detected this was a PCI bridge with VGA on it */
453 /* Are the memory decodes enabled? */
456 /* Build a memory descriptor for a 128KB framebuffer at 0xA0000 */
457 Resource
->Flags
= CM_RESOURCE_MEMORY_READ_WRITE
;
458 Resource
->u
.Generic
.Start
.HighPart
= 0;
459 Resource
->Type
= CmResourceTypeMemory
;
460 Resource
->u
.Generic
.Start
.LowPart
= 0xA0000;
461 Resource
->u
.Generic
.Length
= 0x20000;
465 /* Are the I/O decodes enabled? */
468 /* Build an I/O descriptor for the graphic ports at 0x3B0 */
469 Resource
->Type
= CmResourceTypePort
;
470 Resource
->Flags
= CM_RESOURCE_PORT_POSITIVE_DECODE
| CM_RESOURCE_PORT_10_BIT_DECODE
;
471 Resource
->u
.Port
.Start
.QuadPart
= 0x3B0u
;
472 Resource
->u
.Port
.Length
= 0xC;
475 /* Build an I/O descriptor for the graphic ports at 0x3C0 */
476 Resource
->Type
= CmResourceTypePort
;
477 Resource
->Flags
= CM_RESOURCE_PORT_POSITIVE_DECODE
| CM_RESOURCE_PORT_10_BIT_DECODE
;
478 Resource
->u
.Port
.Start
.QuadPart
= 0x3C0u
;
479 Resource
->u
.Port
.Length
= 0x20;
484 /* If there's an interrupt pin associated, check at least one decode is on */
485 if ((PdoExtension
->InterruptPin
) && ((HaveMemSpace
) || (HaveIoSpace
)))
487 /* Read the interrupt line for the pin, check if it's valid */
488 InterruptLine
= PdoExtension
->AdjustedInterruptLine
;
489 if ((InterruptLine
) && (InterruptLine
!= -1))
491 /* Make sure there's still space */
492 ASSERT(Resource
< LastResource
);
494 /* Add the interrupt descriptor */
495 Resource
->Flags
= CM_RESOURCE_INTERRUPT_LEVEL_SENSITIVE
;
496 Resource
->Type
= CmResourceTypeInterrupt
;
497 Resource
->ShareDisposition
= CmResourceShareShared
;
498 Resource
->u
.Interrupt
.Affinity
= -1;
499 Resource
->u
.Interrupt
.Level
= InterruptLine
;
500 Resource
->u
.Interrupt
.Vector
= InterruptLine
;
504 /* Return the resouce list */
505 *Buffer
= ResourceList
;
506 return STATUS_SUCCESS
;
511 PciQueryTargetDeviceRelations(IN PPCI_PDO_EXTENSION PdoExtension
,
512 IN OUT PDEVICE_RELATIONS
*pDeviceRelations
)
514 PDEVICE_RELATIONS DeviceRelations
;
517 /* If there were existing relations, free them */
518 if (*pDeviceRelations
) ExFreePoolWithTag(*pDeviceRelations
, 0);
520 /* Allocate a new structure for the relations */
521 DeviceRelations
= ExAllocatePoolWithTag(NonPagedPool
,
522 sizeof(DEVICE_RELATIONS
),
524 if (!DeviceRelations
) return STATUS_INSUFFICIENT_RESOURCES
;
526 /* Only one relation: the PDO */
527 DeviceRelations
->Count
= 1;
528 DeviceRelations
->Objects
[0] = PdoExtension
->PhysicalDeviceObject
;
529 ObReferenceObject(DeviceRelations
->Objects
[0]);
531 /* Return the new relations */
532 *pDeviceRelations
= DeviceRelations
;
533 return STATUS_SUCCESS
;
538 PciQueryEjectionRelations(IN PPCI_PDO_EXTENSION PdoExtension
,
539 IN OUT PDEVICE_RELATIONS
*pDeviceRelations
)
541 UNREFERENCED_PARAMETER(PdoExtension
);
542 UNREFERENCED_PARAMETER(pDeviceRelations
);
544 /* Not yet implemented */
545 UNIMPLEMENTED_DBGBREAK();
546 return STATUS_NOT_IMPLEMENTED
;
551 PciBuildRequirementsList(IN PPCI_PDO_EXTENSION PdoExtension
,
552 IN PPCI_COMMON_HEADER PciData
,
553 OUT PIO_RESOURCE_REQUIREMENTS_LIST
* Buffer
)
555 PIO_RESOURCE_REQUIREMENTS_LIST RequirementsList
;
557 UNREFERENCED_PARAMETER(PdoExtension
);
558 UNREFERENCED_PARAMETER(PciData
);
561 /* There aren't, so use the zero descriptor */
562 RequirementsList
= PciZeroIoResourceRequirements
;
564 /* Does it actually exist yet? */
565 if (!PciZeroIoResourceRequirements
)
567 /* Allocate it, and use it for future use */
568 RequirementsList
= PciAllocateIoRequirementsList(0, 0, 0);
569 PciZeroIoResourceRequirements
= RequirementsList
;
570 if (!PciZeroIoResourceRequirements
) return STATUS_INSUFFICIENT_RESOURCES
;
573 /* Return the zero requirements list to the caller */
574 *Buffer
= RequirementsList
;
575 DPRINT1("PCI - build resource reqs - early out, 0 resources\n");
576 return STATUS_SUCCESS
;
578 return STATUS_SUCCESS
;
583 PciQueryRequirements(IN PPCI_PDO_EXTENSION PdoExtension
,
584 IN OUT PIO_RESOURCE_REQUIREMENTS_LIST
*RequirementsList
)
587 PCI_COMMON_HEADER PciHeader
;
590 /* Check if the PDO has any resources, or at least an interrupt pin */
591 if ((PdoExtension
->Resources
) || (PdoExtension
->InterruptPin
))
593 /* Read the current PCI header */
594 PciReadDeviceConfig(PdoExtension
, &PciHeader
, 0, PCI_COMMON_HDR_LENGTH
);
596 /* Use it to build a list of requirements */
597 Status
= PciBuildRequirementsList(PdoExtension
, &PciHeader
, RequirementsList
);
598 if (!NT_SUCCESS(Status
)) return Status
;
600 /* Is this a Compaq PCI Hotplug Controller (r17) on a PAE system ? */
601 if ((PciHeader
.VendorID
== 0xE11) &&
602 (PciHeader
.DeviceID
== 0xA0F7) &&
603 (PciHeader
.RevisionID
== 17) &&
604 (ExIsProcessorFeaturePresent(PF_PAE_ENABLED
)))
606 /* Have not tested this on eVb's machine yet */
607 UNIMPLEMENTED_DBGBREAK();
610 /* Check if the requirements are actually the zero list */
611 if (*RequirementsList
== PciZeroIoResourceRequirements
)
613 /* A simple NULL will sufficie for the PnP Manager */
614 *RequirementsList
= NULL
;
615 DPRINT1("Returning NULL requirements list\n");
619 /* Otherwise, print out the requirements list */
620 PciDebugPrintIoResReqList(*RequirementsList
);
625 /* There aren't any resources, so simply return NULL */
626 DPRINT1("PciQueryRequirements returning NULL requirements list\n");
627 *RequirementsList
= NULL
;
630 /* This call always succeeds (but maybe with no requirements) */
631 return STATUS_SUCCESS
;
635 * 7. The IO/MEM/Busmaster decodes are disabled for the device.
636 * 8. The PCI bus driver sets the operating mode bits of the Programming
637 * Interface byte to switch the controller to native mode.
639 * Important: When the controller is set to native mode, it must quiet itself
640 * and must not decode I/O resources or generate interrupts until the operating
641 * system has enabled the ports in the PCI configuration header.
642 * The IO/MEM/BusMaster bits will be disabled before the mode change, but it
643 * is not possible to disable interrupts on the device. The device must not
644 * generate interrupts (either legacy or native mode) while the decodes are
645 * disabled in the command register.
647 * This operation is expected to be instantaneous and the operating system does
648 * not stall afterward. It is also expected that the interrupt pin register in
649 * the PCI Configuration space for this device is accurate. The operating system
650 * re-reads this data after previously ignoring it.
654 PciConfigureIdeController(IN PPCI_PDO_EXTENSION PdoExtension
,
655 IN PPCI_COMMON_HEADER PciData
,
658 UCHAR MasterMode
, SlaveMode
, MasterFixed
, SlaveFixed
, ProgIf
, NewProgIf
;
662 /* Assume it won't work */
665 /* Get master and slave current settings, and programmability flag */
666 ProgIf
= PciData
->ProgIf
;
667 MasterMode
= (ProgIf
& 1) == 1;
668 MasterFixed
= (ProgIf
& 2) == 0;
669 SlaveMode
= (ProgIf
& 4) == 4;
670 SlaveFixed
= (ProgIf
& 8) == 0;
673 * [..] In order for Windows XP SP1 and Windows Server 2003 to switch an ATA
674 * ATA controller from compatible mode to native mode, the following must be
677 * - The controller must indicate in its programming interface that both channels
678 * can be switched to native mode. Windows XP SP1 and Windows Server 2003 do
679 * not support switching only one IDE channel to native mode. See the PCI IDE
680 * Controller Specification Revision 1.0 for details.
682 if ((MasterMode
!= SlaveMode
) || (MasterFixed
!= SlaveFixed
))
684 /* Windows does not support this configuration, fail */
685 DPRINT1("PCI: Warning unsupported IDE controller configuration for VEN_%04x&DEV_%04x!",
686 PdoExtension
->VendorId
,
687 PdoExtension
->DeviceId
);
691 /* Check if the controller is already in native mode */
692 if ((MasterMode
) && (SlaveMode
))
694 /* Check if I/O decodes should be disabled */
695 if ((Initial
) || (PdoExtension
->IoSpaceUnderNativeIdeControl
))
697 /* Read the current command */
698 PciReadDeviceConfig(PdoExtension
,
700 FIELD_OFFSET(PCI_COMMON_HEADER
, Command
),
703 /* Disable I/O space decode */
704 Command
&= ~PCI_ENABLE_IO_SPACE
;
706 /* Update new command in PCI IDE controller */
707 PciWriteDeviceConfig(PdoExtension
,
709 FIELD_OFFSET(PCI_COMMON_HEADER
, Command
),
712 /* Save updated command value */
713 PciData
->Command
= Command
;
716 /* The controller is now in native mode */
719 else if (!(MasterFixed
) &&
721 (PdoExtension
->BIOSAllowsIDESwitchToNativeMode
) &&
722 !(PdoExtension
->HackFlags
& PCI_HACK_DISABLE_IDE_NATIVE_MODE
))
724 /* Turn off decodes */
725 PciDecodeEnable(PdoExtension
, FALSE
, NULL
);
727 /* Update the current command */
728 PciReadDeviceConfig(PdoExtension
,
730 FIELD_OFFSET(PCI_COMMON_HEADER
, Command
),
733 /* Enable native mode */
734 ProgIf
= PciData
->ProgIf
| 5;
735 PciWriteDeviceConfig(PdoExtension
,
737 FIELD_OFFSET(PCI_COMMON_HEADER
, ProgIf
),
740 /* Verify the setting "stuck" */
741 PciReadDeviceConfig(PdoExtension
,
743 FIELD_OFFSET(PCI_COMMON_HEADER
, ProgIf
),
745 if (NewProgIf
== ProgIf
)
747 /* Update the header and PDO data with the new programming mode */
748 PciData
->ProgIf
= ProgIf
;
749 PdoExtension
->ProgIf
= NewProgIf
;
751 /* Clear the first four BARs to reset current BAR setttings */
752 PciData
->u
.type0
.BaseAddresses
[0] = 0;
753 PciData
->u
.type0
.BaseAddresses
[1] = 0;
754 PciData
->u
.type0
.BaseAddresses
[2] = 0;
755 PciData
->u
.type0
.BaseAddresses
[3] = 0;
756 PciWriteDeviceConfig(PdoExtension
,
757 PciData
->u
.type0
.BaseAddresses
,
758 FIELD_OFFSET(PCI_COMMON_HEADER
,
759 u
.type0
.BaseAddresses
),
762 /* Re-read the BARs to have the latest data for native mode IDE */
763 PciReadDeviceConfig(PdoExtension
,
764 PciData
->u
.type0
.BaseAddresses
,
765 FIELD_OFFSET(PCI_COMMON_HEADER
,
766 u
.type0
.BaseAddresses
),
769 /* Re-read the interrupt pin used for native mode IDE */
770 PciReadDeviceConfig(PdoExtension
,
771 &PciData
->u
.type0
.InterruptPin
,
772 FIELD_OFFSET(PCI_COMMON_HEADER
,
773 u
.type0
.InterruptPin
),
776 /* The IDE Controller is now in native mode */
781 /* Settings did not work, fail */
782 DPRINT1("PCI: Warning failed switch to native mode for IDE controller VEN_%04x&DEV_%04x!",
788 /* Return whether or not native mode was enabled on the IDE controller */
794 PciApplyHacks(IN PPCI_FDO_EXTENSION DeviceExtension
,
795 IN PPCI_COMMON_HEADER PciData
,
796 IN PCI_SLOT_NUMBER SlotNumber
,
797 IN ULONG OperationType
,
798 PPCI_PDO_EXTENSION PdoExtension
)
800 ULONG LegacyBaseAddress
;
804 UNREFERENCED_PARAMETER(SlotNumber
);
806 /* Check what kind of hack operation this is */
807 switch (OperationType
)
810 * This is mostly concerned with fixing up incorrect class data that can
811 * exist on certain PCI hardware before the 2.0 spec was ratified.
813 case PCI_HACK_FIXUP_BEFORE_CONFIGURATION
:
815 /* Note that the i82375 PCI/EISA and the i82378 PCI/ISA bridges that
816 * are present on certain DEC/NT Alpha machines are pre-PCI 2.0 devices
817 * and appear as non-classified, so their correct class/subclass data
818 * is written here instead.
820 if ((PciData
->VendorID
== 0x8086) &&
821 ((PciData
->DeviceID
== 0x482) || (PciData
->DeviceID
== 0x484)))
823 /* Note that 0x482 is the i82375 (EISA), 0x484 is the i82378 (ISA) */
824 PciData
->SubClass
= PciData
->DeviceID
== 0x482 ?
825 PCI_SUBCLASS_BR_EISA
: PCI_SUBCLASS_BR_ISA
;
826 PciData
->BaseClass
= PCI_CLASS_BRIDGE_DEV
;
829 * Because the software is modifying the actual header data from
830 * the BIOS, this flag tells the driver to ignore failures when
831 * comparing the original BIOS data with the PCI data.
833 if (PdoExtension
) PdoExtension
->ExpectedWritebackFailure
= TRUE
;
836 /* Note that in this case, an immediate return is issued */
840 * This is concerned with setting up interrupts correctly for native IDE
841 * mode, but will also handle broken VGA decoding on older bridges as
842 * well as a PAE-specific hack for certain Compaq Hot-Plug Controllers.
844 case PCI_HACK_FIXUP_AFTER_CONFIGURATION
:
846 /* There should always be a PDO extension passed in */
847 ASSERT(PdoExtension
);
850 * On the OPTi Viper-M IDE controller, Linux doesn't support IDE-DMA
851 * and FreeBSD bug reports indicate that the system crashes when the
852 * feature is enabled (so it's disabled on that OS as well). In the
853 * NT PCI Bus Driver, it seems Microsoft too, completely disables
854 * Native IDE functionality on this controller, so it would seem OPTi
855 * simply frelled up this controller.
857 if ((PciData
->VendorID
== 0x1045) && (PciData
->DeviceID
!= 0xC621))
859 /* Disable native mode */
860 PciData
->ProgIf
&= ~5;
861 PciData
->u
.type0
.InterruptPin
= 0;
864 * Because the software is modifying the actual header data from
865 * the BIOS, this flag tells the driver to ignore failures when
866 * comparing the original BIOS data with the PCI data.
868 PdoExtension
->ExpectedWritebackFailure
= TRUE
;
870 else if ((PciData
->BaseClass
== PCI_CLASS_MASS_STORAGE_CTLR
) &&
871 (PciData
->SubClass
== PCI_SUBCLASS_MSC_IDE_CTLR
))
873 /* For other IDE controllers, start out in compatible mode */
874 PdoExtension
->BIOSAllowsIDESwitchToNativeMode
= FALSE
;
877 * Registry must have enabled native mode (typically as a result
878 * of an INF file directive part of the IDE controller's driver)
879 * and the system must not be booted in Safe Mode. If that checks
880 * out, then evaluate the ACPI NATA method to see if the platform
881 * supports this. See the section "BIOS and Platform Prerequisites
882 * for Switching a Native-Mode-Capable Controller" in the Storage
883 * section of the Windows Driver Kit for more details:
885 * 5. For each ATA controller enumerated, the PCI bus driver checks
886 * the Programming Interface register of the IDE controller to
887 * see if it supports switching both channels to native mode.
888 * 6. The PCI bus driver checks whether the BIOS/platform supports
889 * switching the controller by checking the NATA method described
890 * earlier in this article.
892 * If an ATA controller does not indicate that it is native
893 * mode-capable, or if the BIOS NATA control method is missing
894 * or does not list that device, the PCI bus driver does not
895 * switch the controller and it is assigned legacy resources.
897 * If both the controller and the BIOS indicate that the controller
898 * can be switched, the process of switching the controller begins
899 * with the next step.
901 if ((PciEnableNativeModeATA
) &&
902 !(InitSafeBootMode
) &&
903 (PciIsSlotPresentInParentMethod(PdoExtension
, 'ATAN')))
905 /* The platform supports it, remember that */
906 PdoExtension
->BIOSAllowsIDESwitchToNativeMode
= TRUE
;
909 * Now switch the controller into native mode if both channels
910 * support native IDE mode. See "How Windows Switches an ATA
911 * Controller to Native Mode" in the Storage section of the
912 * Windows Driver Kit for more details.
914 PdoExtension
->IDEInNativeMode
=
915 PciConfigureIdeController(PdoExtension
, PciData
, TRUE
);
918 /* Is native mode enabled after all? */
919 if ((PciData
->ProgIf
& 5) != 5)
921 /* Compatible mode, so force ISA-style IRQ14 and IRQ 15 */
922 PciData
->u
.type0
.InterruptPin
= 0;
926 /* Is this a PCI device with legacy VGA card decodes on the root bus? */
927 if ((PdoExtension
->HackFlags
& PCI_HACK_VIDEO_LEGACY_DECODE
) &&
928 (PCI_IS_ROOT_FDO(DeviceExtension
)) &&
929 !(DeviceExtension
->BrokenVideoHackApplied
))
931 /* Tell the arbiter to apply a hack for these older devices */
932 ario_ApplyBrokenVideoHack(DeviceExtension
);
935 /* Is this a Compaq PCI Hotplug Controller (r17) on a PAE system ? */
936 if ((PciData
->VendorID
== 0xE11) &&
937 (PciData
->DeviceID
== 0xA0F7) &&
938 (PciData
->RevisionID
== 17) &&
939 (ExIsProcessorFeaturePresent(PF_PAE_ENABLED
)))
941 /* Turn off the decodes immediately */
942 PciData
->Command
&= ~(PCI_ENABLE_IO_SPACE
|
943 PCI_ENABLE_MEMORY_SPACE
|
944 PCI_ENABLE_BUS_MASTER
);
945 PciWriteDeviceConfig(PdoExtension
,
947 FIELD_OFFSET(PCI_COMMON_HEADER
, Command
),
950 /* Do not EVER turn them on again, this will blow up the system */
951 PdoExtension
->CommandEnables
&= ~(PCI_ENABLE_IO_SPACE
|
952 PCI_ENABLE_MEMORY_SPACE
|
953 PCI_ENABLE_BUS_MASTER
);
954 PdoExtension
->HackFlags
|= PCI_HACK_PRESERVE_COMMAND
;
959 * This is called whenever resources are changed and hardware needs to be
960 * updated. It is concerned with two highly specific erratas on an IBM
961 * hot-plug docking bridge used on the Thinkpad 600 Series and on Intel's
964 case PCI_HACK_FIXUP_BEFORE_UPDATE
:
966 /* There should always be a PDO extension passed in */
967 ASSERT(PdoExtension
);
969 /* Is this an IBM 20H2999 PCI Docking Bridge, used on Thinkpads? */
970 if ((PdoExtension
->VendorId
== 0x1014) &&
971 (PdoExtension
->DeviceId
== 0x95))
973 /* Read the current command */
974 PciReadDeviceConfig(PdoExtension
,
976 FIELD_OFFSET(PCI_COMMON_HEADER
, Command
),
979 /* Turn off the decodes */
980 PciDecodeEnable(PdoExtension
, FALSE
, &Command
);
982 /* Apply the required IBM workaround */
983 PciReadDeviceConfig(PdoExtension
, &RegValue
, 0xE0, sizeof(UCHAR
));
986 PciWriteDeviceConfig(PdoExtension
, &RegValue
, 0xE0, sizeof(UCHAR
));
988 /* Restore the command to its original value */
989 PciWriteDeviceConfig(PdoExtension
,
991 FIELD_OFFSET(PCI_COMMON_HEADER
, Command
),
997 * Check for Intel ICH PCI-to-PCI (i82801) bridges (used on the i810,
998 * i820, i840, i845 Chipsets) that have subtractive decode enabled,
999 * and whose hack flags do not specifiy that this support is broken.
1001 if ((PdoExtension
->HeaderType
== PCI_BRIDGE_TYPE
) &&
1002 (PdoExtension
->Dependent
.type1
.SubtractiveDecode
) &&
1003 ((PdoExtension
->VendorId
== 0x8086) &&
1004 ((PdoExtension
->DeviceId
== 0x2418) ||
1005 (PdoExtension
->DeviceId
== 0x2428) ||
1006 (PdoExtension
->DeviceId
== 0x244E) ||
1007 (PdoExtension
->DeviceId
== 0x2448))) &&
1008 !(PdoExtension
->HackFlags
& PCI_HACK_BROKEN_SUBTRACTIVE_DECODE
))
1011 * The positive decode window shouldn't be used, these values are
1012 * normally all read-only or initialized to 0 by the BIOS, but
1013 * it appears Intel doesn't do this, so the PCI Bus Driver will
1014 * do it in software instead. Note that this is used to prevent
1015 * certain non-compliant PCI devices from breaking down due to the
1016 * fact that these ICH bridges have a known "quirk" (which Intel
1017 * documents as a known "erratum", although it's not not really
1018 * an ICH bug since the PCI specification does allow for it) in
1019 * that they will sometimes send non-zero addresses during special
1020 * cycles (ie: non-zero data during the address phase). These
1021 * broken PCI cards will mistakenly attempt to claim the special
1022 * cycle and corrupt their I/O and RAM ranges. Again, in Intel's
1023 * defense, the PCI specification only requires stable data, not
1024 * necessarily zero data, during the address phase.
1026 PciData
->u
.type1
.MemoryBase
= 0xFFFF;
1027 PciData
->u
.type1
.PrefetchBase
= 0xFFFF;
1028 PciData
->u
.type1
.IOBase
= 0xFF;
1029 PciData
->u
.type1
.IOLimit
= 0;
1030 PciData
->u
.type1
.MemoryLimit
= 0;
1031 PciData
->u
.type1
.PrefetchLimit
= 0;
1032 PciData
->u
.type1
.PrefetchBaseUpper32
= 0;
1033 PciData
->u
.type1
.PrefetchLimitUpper32
= 0;
1034 PciData
->u
.type1
.IOBaseUpper16
= 0;
1035 PciData
->u
.type1
.IOLimitUpper16
= 0;
1043 /* Finally, also check if this is this a CardBUS device? */
1044 if (PCI_CONFIGURATION_TYPE(PciData
) == PCI_CARDBUS_BRIDGE_TYPE
)
1047 * At offset 44h the LegacyBaseAddress is stored, which is cleared by
1048 * ACPI-aware versions of Windows, to disable legacy-mode I/O access to
1049 * CardBus controllers. For more information, see "Supporting CardBus
1050 * Controllers under ACPI" in the "CardBus Controllers and Windows"
1051 * Whitepaper on WHDC.
1053 LegacyBaseAddress
= 0;
1054 PciWriteDeviceConfig(PdoExtension
,
1056 sizeof(PCI_COMMON_HEADER
) + sizeof(ULONG
),
1063 PcipIsSameDevice(IN PPCI_PDO_EXTENSION DeviceExtension
,
1064 IN PPCI_COMMON_HEADER PciData
)
1066 BOOLEAN IdMatch
, RevMatch
, SubsysMatch
;
1067 ULONGLONG HackFlags
= DeviceExtension
->HackFlags
;
1069 /* Check if the IDs match */
1070 IdMatch
= (PciData
->VendorID
== DeviceExtension
->VendorId
) &&
1071 (PciData
->DeviceID
== DeviceExtension
->DeviceId
);
1072 if (!IdMatch
) return FALSE
;
1074 /* If the device has a valid revision, check if it matches */
1075 RevMatch
= (HackFlags
& PCI_HACK_NO_REVISION_AFTER_D3
) ||
1076 (PciData
->RevisionID
== DeviceExtension
->RevisionId
);
1077 if (!RevMatch
) return FALSE
;
1079 /* For multifunction devices, this is enough to assume they're the same */
1080 if (PCI_MULTIFUNCTION_DEVICE(PciData
)) return TRUE
;
1082 /* For bridge devices, there's also nothing else that can be checked */
1083 if (DeviceExtension
->BaseClass
== PCI_CLASS_BRIDGE_DEV
) return TRUE
;
1085 /* Devices, on the other hand, have subsystem data that can be compared */
1086 SubsysMatch
= (HackFlags
& (PCI_HACK_NO_SUBSYSTEM
|
1087 PCI_HACK_NO_SUBSYSTEM_AFTER_D3
)) ||
1088 ((DeviceExtension
->SubsystemVendorId
==
1089 PciData
->u
.type0
.SubVendorID
) &&
1090 (DeviceExtension
->SubsystemId
==
1091 PciData
->u
.type0
.SubSystemID
));
1097 PciSkipThisFunction(IN PPCI_COMMON_HEADER PciData
,
1098 IN PCI_SLOT_NUMBER Slot
,
1099 IN UCHAR OperationType
,
1100 IN ULONGLONG HackFlags
)
1104 /* Check if this is device enumeration */
1105 if (OperationType
== PCI_SKIP_DEVICE_ENUMERATION
)
1107 /* Check if there's a hackflag saying not to enumerate this device */
1108 if (HackFlags
& PCI_HACK_NO_ENUM_AT_ALL
) break;
1110 /* Check if this is the high end of a double decker device */
1111 if ((HackFlags
& PCI_HACK_DOUBLE_DECKER
) &&
1112 (Slot
.u
.bits
.DeviceNumber
>= 16))
1114 /* It belongs to the same device, so skip it */
1115 DPRINT1(" Device (Ven %04x Dev %04x (d=0x%x, f=0x%x)) is a ghost.\n",
1118 Slot
.u
.bits
.DeviceNumber
,
1119 Slot
.u
.bits
.FunctionNumber
);
1123 else if (OperationType
== PCI_SKIP_RESOURCE_ENUMERATION
)
1125 /* Resource enumeration, check for a hackflag saying not to do it */
1126 if (HackFlags
& PCI_HACK_ENUM_NO_RESOURCE
) break;
1130 /* Logic error in the driver */
1131 ASSERTMSG("PCI Skip Function - Operation type unknown.", FALSE
);
1134 /* Check for legacy bridges during resource enumeration */
1135 if ((PciData
->BaseClass
== PCI_CLASS_BRIDGE_DEV
) &&
1136 (PciData
->SubClass
<= PCI_SUBCLASS_BR_MCA
) &&
1137 (OperationType
== PCI_SKIP_RESOURCE_ENUMERATION
))
1139 /* Their resources are not enumerated, only PCI and Cardbus/PCMCIA */
1142 else if (PciData
->BaseClass
== PCI_CLASS_NOT_DEFINED
)
1144 /* Undefined base class (usually a PCI BIOS/ROM bug) */
1145 DPRINT1(" Vendor %04x, Device %04x has class code of PCI_CLASS_NOT_DEFINED\n",
1150 * The Alder has an Intel Extended Express System Support Controller
1151 * which presents apparently spurious BARs. When the PCI resource
1152 * code tries to reassign these BARs, the second IO-APIC gets
1153 * disabled (with disastrous consequences). The first BAR is the
1154 * actual IO-APIC, the remaining five bars seem to be spurious
1155 * resources, so ignore this device completely.
1157 if ((PciData
->VendorID
== 0x8086) && (PciData
->DeviceID
== 8)) break;
1160 /* Other normal PCI cards and bridges are enumerated */
1161 if (PCI_CONFIGURATION_TYPE(PciData
) <= PCI_CARDBUS_BRIDGE_TYPE
) return FALSE
;
1164 /* Hit one of the known bugs/hackflags, or this is a new kind of PCI unit */
1165 DPRINT1(" Device skipped (not enumerated).\n");
1171 PciGetEnhancedCapabilities(IN PPCI_PDO_EXTENSION PdoExtension
,
1172 IN PPCI_COMMON_HEADER PciData
)
1174 ULONG HeaderType
, CapPtr
, TargetAgpCapabilityId
;
1175 DEVICE_POWER_STATE WakeLevel
;
1176 PCI_CAPABILITIES_HEADER AgpCapability
;
1177 PCI_PM_CAPABILITY PowerCapabilities
;
1180 /* Assume no known wake level */
1181 PdoExtension
->PowerState
.DeviceWakeLevel
= PowerDeviceUnspecified
;
1183 /* Make sure the device has capabilities */
1184 if (!(PciData
->Status
& PCI_STATUS_CAPABILITIES_LIST
))
1186 /* If it doesn't, there will be no power management */
1187 PdoExtension
->CapabilitiesPtr
= 0;
1188 PdoExtension
->HackFlags
|= PCI_HACK_NO_PM_CAPS
;
1192 /* There's capabilities, need to figure out where to get the offset */
1193 HeaderType
= PCI_CONFIGURATION_TYPE(PciData
);
1194 if (HeaderType
== PCI_CARDBUS_BRIDGE_TYPE
)
1196 /* Use the bridge's header */
1197 CapPtr
= PciData
->u
.type2
.CapabilitiesPtr
;
1201 /* Use the device header */
1202 ASSERT(HeaderType
<= PCI_CARDBUS_BRIDGE_TYPE
);
1203 CapPtr
= PciData
->u
.type0
.CapabilitiesPtr
;
1206 /* Skip garbage capabilities pointer */
1207 if (((CapPtr
& 0x3) != 0) || (CapPtr
< PCI_COMMON_HDR_LENGTH
))
1209 /* Report no extended capabilities */
1210 PdoExtension
->CapabilitiesPtr
= 0;
1211 PdoExtension
->HackFlags
|= PCI_HACK_NO_PM_CAPS
;
1215 DPRINT1("Device has capabilities at: %lx\n", CapPtr
);
1216 PdoExtension
->CapabilitiesPtr
= CapPtr
;
1218 /* Check for PCI-to-PCI Bridges and AGP bridges */
1219 if ((PdoExtension
->BaseClass
== PCI_CLASS_BRIDGE_DEV
) &&
1220 ((PdoExtension
->SubClass
== PCI_SUBCLASS_BR_HOST
) ||
1221 (PdoExtension
->SubClass
== PCI_SUBCLASS_BR_PCI_TO_PCI
)))
1223 /* Query either the raw AGP capabilitity, or the Target AGP one */
1224 TargetAgpCapabilityId
= (PdoExtension
->SubClass
==
1225 PCI_SUBCLASS_BR_PCI_TO_PCI
) ?
1226 PCI_CAPABILITY_ID_AGP_TARGET
:
1227 PCI_CAPABILITY_ID_AGP
;
1228 if (PciReadDeviceCapability(PdoExtension
,
1229 PdoExtension
->CapabilitiesPtr
,
1230 TargetAgpCapabilityId
,
1232 sizeof(PCI_CAPABILITIES_HEADER
)))
1234 /* AGP target ID was found, store it */
1235 DPRINT1("AGP ID: %lx\n", TargetAgpCapabilityId
);
1236 PdoExtension
->TargetAgpCapabilityId
= TargetAgpCapabilityId
;
1240 /* Check for devices that are known not to have proper power management */
1241 if (!(PdoExtension
->HackFlags
& PCI_HACK_NO_PM_CAPS
))
1243 /* Query if this device supports power management */
1244 if (!PciReadDeviceCapability(PdoExtension
,
1245 PdoExtension
->CapabilitiesPtr
,
1246 PCI_CAPABILITY_ID_POWER_MANAGEMENT
,
1247 &PowerCapabilities
.Header
,
1248 sizeof(PCI_PM_CAPABILITY
)))
1250 /* No power management, so act as if it had the hackflag set */
1251 DPRINT1("No PM caps, disabling PM\n");
1252 PdoExtension
->HackFlags
|= PCI_HACK_NO_PM_CAPS
;
1256 /* Otherwise, pick the highest wake level that is supported */
1257 WakeLevel
= PowerDeviceUnspecified
;
1258 if (PowerCapabilities
.PMC
.Capabilities
.Support
.PMED0
)
1259 WakeLevel
= PowerDeviceD0
;
1260 if (PowerCapabilities
.PMC
.Capabilities
.Support
.PMED1
)
1261 WakeLevel
= PowerDeviceD1
;
1262 if (PowerCapabilities
.PMC
.Capabilities
.Support
.PMED2
)
1263 WakeLevel
= PowerDeviceD2
;
1264 if (PowerCapabilities
.PMC
.Capabilities
.Support
.PMED3Hot
)
1265 WakeLevel
= PowerDeviceD3
;
1266 if (PowerCapabilities
.PMC
.Capabilities
.Support
.PMED3Cold
)
1267 WakeLevel
= PowerDeviceD3
;
1268 PdoExtension
->PowerState
.DeviceWakeLevel
= WakeLevel
;
1270 /* Convert the PCI power state to the NT power state */
1271 PdoExtension
->PowerState
.CurrentDeviceState
=
1272 PowerCapabilities
.PMCSR
.ControlStatus
.PowerState
+ 1;
1274 /* Save all the power capabilities */
1275 PdoExtension
->PowerCapabilities
= PowerCapabilities
.PMC
.Capabilities
;
1276 DPRINT1("PM Caps Found! Wake Level: %d Power State: %d\n",
1277 WakeLevel
, PdoExtension
->PowerState
.CurrentDeviceState
);
1283 /* At the very end of all this, does this device not have power management? */
1284 if (PdoExtension
->HackFlags
& PCI_HACK_NO_PM_CAPS
)
1286 /* Then guess the current state based on whether the decodes are on */
1287 PdoExtension
->PowerState
.CurrentDeviceState
=
1288 PciData
->Command
& (PCI_ENABLE_IO_SPACE
|
1289 PCI_ENABLE_MEMORY_SPACE
|
1290 PCI_ENABLE_BUS_MASTER
) ?
1291 PowerDeviceD0
: PowerDeviceD3
;
1292 DPRINT1("PM is off, so assumed device is: %d based on enables\n",
1293 PdoExtension
->PowerState
.CurrentDeviceState
);
1299 PciWriteLimitsAndRestoreCurrent(IN PVOID Reserved
,
1302 PPCI_CONFIGURATOR_CONTEXT Context
= Context2
;
1303 PPCI_COMMON_HEADER PciData
, Current
;
1304 PPCI_PDO_EXTENSION PdoExtension
;
1306 UNREFERENCED_PARAMETER(Reserved
);
1308 /* Grab all parameters from the context */
1309 PdoExtension
= Context
->PdoExtension
;
1310 Current
= Context
->Current
;
1311 PciData
= Context
->PciData
;
1313 /* Write the limit discovery header */
1314 PciWriteDeviceConfig(PdoExtension
, PciData
, 0, PCI_COMMON_HDR_LENGTH
);
1316 /* Now read what the device indicated the limits are */
1317 PciReadDeviceConfig(PdoExtension
, PciData
, 0, PCI_COMMON_HDR_LENGTH
);
1319 /* Then write back the original configuration header */
1320 PciWriteDeviceConfig(PdoExtension
, Current
, 0, PCI_COMMON_HDR_LENGTH
);
1322 /* Copy back the original command that was saved in the context */
1323 Current
->Command
= Context
->Command
;
1324 if (Context
->Command
)
1326 /* Program it back into the device */
1327 PciWriteDeviceConfig(PdoExtension
,
1329 FIELD_OFFSET(PCI_COMMON_HEADER
, Command
),
1333 /* Copy back the original status that was saved as well */
1334 Current
->Status
= Context
->Status
;
1336 /* Call the configurator to restore any other data that might've changed */
1337 Context
->Configurator
->RestoreCurrent(Context
);
1342 PcipGetFunctionLimits(IN PPCI_CONFIGURATOR_CONTEXT Context
)
1344 PPCI_CONFIGURATOR Configurator
;
1345 PPCI_COMMON_HEADER PciData
, Current
;
1346 PPCI_PDO_EXTENSION PdoExtension
;
1347 PCI_IPI_CONTEXT IpiContext
;
1348 PIO_RESOURCE_DESCRIPTOR IoDescriptor
;
1352 /* Grab all parameters from the context */
1353 PdoExtension
= Context
->PdoExtension
;
1354 Current
= Context
->Current
;
1355 PciData
= Context
->PciData
;
1357 /* Save the current PCI Command and Status word */
1358 Context
->Status
= Current
->Status
;
1359 Context
->Command
= Current
->Command
;
1361 /* Now that they're saved, clear the status, and disable all decodes */
1362 Current
->Status
= 0;
1363 Current
->Command
&= ~(PCI_ENABLE_IO_SPACE
|
1364 PCI_ENABLE_MEMORY_SPACE
|
1365 PCI_ENABLE_BUS_MASTER
);
1367 /* Make a copy of the current PCI configuration header (with decodes off) */
1368 RtlCopyMemory(PciData
, Current
, PCI_COMMON_HDR_LENGTH
);
1370 /* Locate the correct resource configurator for this type of device */
1371 Configurator
= &PciConfigurators
[PdoExtension
->HeaderType
];
1372 Context
->Configurator
= Configurator
;
1374 /* Initialize it, which will typically setup the BARs for limit discovery */
1375 Configurator
->Initialize(Context
);
1377 /* Check for critical devices and PCI Debugging devices */
1378 if ((PdoExtension
->HackFlags
& PCI_HACK_CRITICAL_DEVICE
) ||
1379 (PdoExtension
->OnDebugPath
))
1381 /* Specifically check for a PCI Debugging device */
1382 if (PdoExtension
->OnDebugPath
)
1384 /* Was it enabled for bus mastering? */
1385 if (Context
->Command
& PCI_ENABLE_BUS_MASTER
)
1387 /* This decode needs to be re-enabled so debugging can work */
1388 PciData
->Command
|= PCI_ENABLE_BUS_MASTER
;
1389 Current
->Command
|= PCI_ENABLE_BUS_MASTER
;
1392 /* Disable the debugger while the discovery is happening */
1393 KdDisableDebugger();
1396 /* For these devices, an IPI must be sent to force high-IRQL discovery */
1397 IpiContext
.Barrier
= 1;
1398 IpiContext
.RunCount
= 1;
1399 IpiContext
.DeviceExtension
= PdoExtension
;
1400 IpiContext
.Function
= PciWriteLimitsAndRestoreCurrent
;
1401 IpiContext
.Context
= Context
;
1402 KeIpiGenericCall(PciExecuteCriticalSystemRoutine
, (ULONG_PTR
)&IpiContext
);
1404 /* Re-enable the debugger if this was a PCI Debugging Device */
1405 if (PdoExtension
->OnDebugPath
) KdEnableDebugger();
1409 /* Otherwise, it's safe to do this in-line at low IRQL */
1410 PciWriteLimitsAndRestoreCurrent(PdoExtension
, Context
);
1414 * Check if it's valid to compare the headers to see if limit discovery mode
1415 * has properly exited (the expected case is that the PCI header would now
1416 * be equal to what it was before). In some cases, it is known that this will
1417 * fail, because during PciApplyHacks (among other places), software hacks
1418 * had to be applied to the header, which the hardware-side will not see, and
1419 * thus the headers would appear "different".
1421 if (!PdoExtension
->ExpectedWritebackFailure
)
1423 /* Read the current PCI header now, after discovery has completed */
1424 PciReadDeviceConfig(PdoExtension
, PciData
+ 1, 0, PCI_COMMON_HDR_LENGTH
);
1426 /* Check if the current header at entry, is equal to the header now */
1427 Offset
= RtlCompareMemory(PciData
+ 1, Current
, PCI_COMMON_HDR_LENGTH
);
1428 if (Offset
!= PCI_COMMON_HDR_LENGTH
)
1430 /* It's not, which means configuration somehow changed, dump this */
1431 DPRINT1("PCI - CFG space write verify failed at offset 0x%x\n", Offset
);
1432 PciDebugDumpCommonConfig(PciData
+ 1);
1433 DPRINT1("----------\n");
1434 PciDebugDumpCommonConfig(Current
);
1438 /* This PDO should not already have resources, since this is only done once */
1439 ASSERT(PdoExtension
->Resources
== NULL
);
1441 /* Allocate the structure that will hold the discovered resources and limits */
1442 PdoExtension
->Resources
= ExAllocatePoolWithTag(NonPagedPool
,
1443 sizeof(PCI_FUNCTION_RESOURCES
),
1445 if (!PdoExtension
->Resources
) return STATUS_INSUFFICIENT_RESOURCES
;
1447 /* Clear it out for now */
1448 RtlZeroMemory(PdoExtension
->Resources
, sizeof(PCI_FUNCTION_RESOURCES
));
1450 /* Now call the configurator, which will first store the limits... */
1451 Configurator
->SaveLimits(Context
);
1453 /* ...and then store the current resources being used */
1454 Configurator
->SaveCurrentSettings(Context
);
1456 /* Loop all the limit descriptors backwards */
1457 IoDescriptor
= &PdoExtension
->Resources
->Limit
[PCI_TYPE0_ADDRESSES
+ 1];
1460 /* Keep going until a non-null descriptor is found */
1462 if (IoDescriptor
->Type
!= CmResourceTypeNull
) break;
1464 /* This is a null descriptor, is it the last one? */
1465 if (IoDescriptor
== &PdoExtension
->Resources
->Limit
[PCI_TYPE0_ADDRESSES
+ 1])
1467 /* This means the descriptor is NULL, which means discovery failed */
1468 DPRINT1("PCI Resources fail!\n");
1470 /* No resources will be assigned for the device */
1471 ExFreePoolWithTag(PdoExtension
->Resources
, 0);
1472 PdoExtension
->Resources
= NULL
;
1477 /* Return success here, even if the device has no assigned resources */
1478 return STATUS_SUCCESS
;
1483 PciGetFunctionLimits(IN PPCI_PDO_EXTENSION PdoExtension
,
1484 IN PPCI_COMMON_HEADER Current
,
1485 IN ULONGLONG HackFlags
)
1488 PPCI_COMMON_HEADER PciData
;
1489 PCI_CONFIGURATOR_CONTEXT Context
;
1492 /* Do the hackflags indicate this device should be skipped? */
1493 if (PciSkipThisFunction(Current
,
1495 PCI_SKIP_RESOURCE_ENUMERATION
,
1498 /* Do not process its resources */
1499 return STATUS_SUCCESS
;
1502 /* Allocate a buffer to hold two PCI configuration headers */
1503 PciData
= ExAllocatePoolWithTag(0, 2 * PCI_COMMON_HDR_LENGTH
, 'BicP');
1504 if (!PciData
) return STATUS_INSUFFICIENT_RESOURCES
;
1506 /* Set up the context for the resource enumeration, and do it */
1507 Context
.Current
= Current
;
1508 Context
.PciData
= PciData
;
1509 Context
.PdoExtension
= PdoExtension
;
1510 Status
= PcipGetFunctionLimits(&Context
);
1512 /* Enumeration is completed, free the PCI headers and return the status */
1513 ExFreePoolWithTag(PciData
, 0);
1519 PciProcessBus(IN PPCI_FDO_EXTENSION DeviceExtension
)
1521 PPCI_PDO_EXTENSION PdoExtension
;
1522 PDEVICE_OBJECT PhysicalDeviceObject
;
1525 /* Get the PDO Extension */
1526 PhysicalDeviceObject
= DeviceExtension
->PhysicalDeviceObject
;
1527 PdoExtension
= (PPCI_PDO_EXTENSION
)PhysicalDeviceObject
->DeviceExtension
;
1529 /* Cheeck if this is the root bus */
1530 if (!PCI_IS_ROOT_FDO(DeviceExtension
))
1532 /* Not really handling this year */
1533 UNIMPLEMENTED_DBGBREAK();
1535 /* Check for PCI bridges with the ISA bit set, or required */
1536 if ((PdoExtension
) &&
1537 (PciClassifyDeviceType(PdoExtension
) == PciTypePciBridge
) &&
1538 ((PdoExtension
->Dependent
.type1
.IsaBitRequired
) ||
1539 (PdoExtension
->Dependent
.type1
.IsaBitSet
)))
1541 /* We'll need to do some legacy support */
1542 UNIMPLEMENTED_DBGBREAK();
1547 /* Scan all of the root bus' children bridges */
1548 for (PdoExtension
= DeviceExtension
->ChildBridgePdoList
;
1550 PdoExtension
= PdoExtension
->NextBridge
)
1552 /* Find any that have the VGA decode bit on */
1553 if (PdoExtension
->Dependent
.type1
.VgaBitSet
)
1555 /* Again, some more legacy support we'll have to do */
1556 UNIMPLEMENTED_DBGBREAK();
1561 /* Check for ACPI systems where the OS assigns bus numbers */
1562 if (PciAssignBusNumbers
)
1564 /* Not yet supported */
1565 UNIMPLEMENTED_DBGBREAK();
1571 PciScanBus(IN PPCI_FDO_EXTENSION DeviceExtension
)
1573 ULONG MaxDevice
= PCI_MAX_DEVICES
;
1574 BOOLEAN ProcessFlag
= FALSE
;
1575 ULONG i
, j
, k
, Size
;
1576 USHORT CapOffset
, TempOffset
;
1578 PDEVICE_OBJECT DeviceObject
;
1579 UCHAR Buffer
[PCI_COMMON_HDR_LENGTH
];
1580 UCHAR BiosBuffer
[PCI_COMMON_HDR_LENGTH
];
1581 PPCI_COMMON_HEADER PciData
= (PVOID
)Buffer
;
1582 PPCI_COMMON_HEADER BiosData
= (PVOID
)BiosBuffer
;
1583 PCI_SLOT_NUMBER PciSlot
;
1586 PPCI_PDO_EXTENSION PdoExtension
, NewExtension
;
1587 PPCI_PDO_EXTENSION
* BridgeExtension
;
1588 PWCHAR DescriptionText
;
1589 USHORT SubVendorId
, SubSystemId
;
1590 PCI_CAPABILITIES_HEADER CapHeader
, PcixCapHeader
;
1592 DPRINT1("PCI Scan Bus: FDO Extension @ 0x%p, Base Bus = 0x%x\n",
1593 DeviceExtension
, DeviceExtension
->BaseBus
);
1595 /* Is this the root FDO? */
1596 if (!PCI_IS_ROOT_FDO(DeviceExtension
))
1598 /* Get the PDO for the child bus */
1599 PdoExtension
= DeviceExtension
->PhysicalDeviceObject
->DeviceExtension
;
1600 ASSERT_PDO(PdoExtension
);
1602 /* Check for hack which only allows bus to have one child device */
1603 if (PdoExtension
->HackFlags
& PCI_HACK_ONE_CHILD
) MaxDevice
= 1;
1605 /* Check if the secondary bus number has changed */
1606 PciReadDeviceConfig(PdoExtension
,
1608 FIELD_OFFSET(PCI_COMMON_HEADER
, u
.type1
.SecondaryBus
),
1610 if (SecondaryBus
!= PdoExtension
->Dependent
.type1
.SecondaryBus
)
1612 UNIMPLEMENTED_DBGBREAK("PCI: Bus numbers have been changed! Restoring originals.\n");
1616 /* Loop every device on the bus */
1617 PciSlot
.u
.bits
.Reserved
= 0;
1618 i
= DeviceExtension
->BaseBus
;
1619 for (j
= 0; j
< MaxDevice
; j
++)
1621 /* Loop every function of each device */
1622 PciSlot
.u
.bits
.DeviceNumber
= j
;
1623 for (k
= 0; k
< PCI_MAX_FUNCTION
; k
++)
1625 /* Build the final slot structure */
1626 PciSlot
.u
.bits
.FunctionNumber
= k
;
1628 /* Read the vendor for this slot */
1629 PciReadSlotConfig(DeviceExtension
,
1635 /* Skip invalid device */
1636 if (PciData
->VendorID
== PCI_INVALID_VENDORID
) continue;
1638 /* Now read the whole header */
1639 PciReadSlotConfig(DeviceExtension
,
1643 PCI_COMMON_HDR_LENGTH
- sizeof(USHORT
));
1645 /* Apply any hacks before even analyzing the configuration header */
1646 PciApplyHacks(DeviceExtension
,
1649 PCI_HACK_FIXUP_BEFORE_CONFIGURATION
,
1652 /* Dump device that was found */
1653 DPRINT1("Scan Found Device 0x%x (b=0x%x, d=0x%x, f=0x%x)\n",
1659 /* Dump the device's header */
1660 PciDebugDumpCommonConfig(PciData
);
1662 /* Find description for this device for the debugger's sake */
1663 DescriptionText
= PciGetDeviceDescriptionMessage(PciData
->BaseClass
,
1665 DPRINT1("Device Description \"%S\".\n",
1666 DescriptionText
? DescriptionText
: L
"(NULL)");
1667 if (DescriptionText
) ExFreePoolWithTag(DescriptionText
, 0);
1669 /* Check if there is an ACPI Watchdog Table */
1672 /* Check if this PCI device is the ACPI Watchdog Device... */
1673 UNIMPLEMENTED_DBGBREAK();
1676 /* Check for non-simple devices */
1677 if ((PCI_MULTIFUNCTION_DEVICE(PciData
)) ||
1678 (PciData
->BaseClass
== PCI_CLASS_BRIDGE_DEV
))
1680 /* No subsystem data defined for these kinds of bridges */
1686 /* Read the subsystem information from the PCI header */
1687 SubVendorId
= PciData
->u
.type0
.SubVendorID
;
1688 SubSystemId
= PciData
->u
.type0
.SubSystemID
;
1691 /* Get any hack flags for this device */
1692 HackFlags
= PciGetHackFlags(PciData
->VendorID
,
1696 PciData
->RevisionID
);
1698 /* Check if this device is considered critical by the OS */
1699 if (PciIsCriticalDeviceClass(PciData
->BaseClass
, PciData
->SubClass
))
1701 /* Check if normally the decodes would be disabled */
1702 if (!(HackFlags
& PCI_HACK_DONT_DISABLE_DECODES
))
1704 /* Because this device is critical, don't disable them */
1705 DPRINT1("Not allowing PM Because device is critical\n");
1706 HackFlags
|= PCI_HACK_CRITICAL_DEVICE
;
1710 /* PCI bridges with a VGA card are also considered critical */
1711 if ((PciData
->BaseClass
== PCI_CLASS_BRIDGE_DEV
) &&
1712 (PciData
->SubClass
== PCI_SUBCLASS_BR_PCI_TO_PCI
) &&
1713 (PciData
->u
.type1
.BridgeControl
& PCI_ENABLE_BRIDGE_VGA
) &&
1714 !(HackFlags
& PCI_HACK_DONT_DISABLE_DECODES
))
1716 /* Do not disable their decodes either */
1717 DPRINT1("Not allowing PM because device is VGA\n");
1718 HackFlags
|= PCI_HACK_CRITICAL_DEVICE
;
1721 /* Check if the device should be skipped for whatever reason */
1722 if (PciSkipThisFunction(PciData
,
1724 PCI_SKIP_DEVICE_ENUMERATION
,
1727 /* Skip this device */
1731 /* Check if a PDO has already been created for this device */
1732 PdoExtension
= PciFindPdoByFunction(DeviceExtension
,
1737 /* Rescan scenarios are not yet implemented */
1738 UNIMPLEMENTED_DBGBREAK();
1741 /* Bus processing will need to happen */
1744 /* Create the PDO for this device */
1745 Status
= PciPdoCreate(DeviceExtension
, PciSlot
, &DeviceObject
);
1746 ASSERT(NT_SUCCESS(Status
));
1747 NewExtension
= (PPCI_PDO_EXTENSION
)DeviceObject
->DeviceExtension
;
1749 /* Check for broken devices with wrong/no class codes */
1750 if (HackFlags
& PCI_HACK_FAKE_CLASS_CODE
)
1752 /* Setup a default one */
1753 PciData
->BaseClass
= PCI_CLASS_BASE_SYSTEM_DEV
;
1754 PciData
->SubClass
= PCI_SUBCLASS_SYS_OTHER
;
1756 /* Device will behave erratically when reading back data */
1757 NewExtension
->ExpectedWritebackFailure
= TRUE
;
1760 /* Clone all the information from the header */
1761 NewExtension
->VendorId
= PciData
->VendorID
;
1762 NewExtension
->DeviceId
= PciData
->DeviceID
;
1763 NewExtension
->RevisionId
= PciData
->RevisionID
;
1764 NewExtension
->ProgIf
= PciData
->ProgIf
;
1765 NewExtension
->SubClass
= PciData
->SubClass
;
1766 NewExtension
->BaseClass
= PciData
->BaseClass
;
1767 NewExtension
->HeaderType
= PCI_CONFIGURATION_TYPE(PciData
);
1769 /* Check for modern bridge types, which are managed by the driver */
1770 if ((NewExtension
->BaseClass
== PCI_CLASS_BRIDGE_DEV
) &&
1771 ((NewExtension
->SubClass
== PCI_SUBCLASS_BR_PCI_TO_PCI
) ||
1772 (NewExtension
->SubClass
== PCI_SUBCLASS_BR_CARDBUS
)))
1774 /* Acquire this device's lock */
1775 KeEnterCriticalRegion();
1776 KeWaitForSingleObject(&DeviceExtension
->ChildListLock
,
1782 /* Scan the bridge list until the first free entry */
1783 for (BridgeExtension
= &DeviceExtension
->ChildBridgePdoList
;
1785 BridgeExtension
= &(*BridgeExtension
)->NextBridge
);
1787 /* Add this PDO as a bridge */
1788 *BridgeExtension
= NewExtension
;
1789 ASSERT(NewExtension
->NextBridge
== NULL
);
1791 /* Release this device's lock */
1792 KeSetEvent(&DeviceExtension
->ChildListLock
,
1795 KeLeaveCriticalRegion();
1798 /* Get the PCI BIOS configuration saved in the registry */
1799 Status
= PciGetBiosConfig(NewExtension
, BiosData
);
1800 if (NT_SUCCESS(Status
))
1802 /* This path has not yet been fully tested by eVb */
1803 DPRINT1("Have BIOS configuration!\n");
1806 /* Check if the PCI BIOS configuration has changed */
1807 if (!PcipIsSameDevice(NewExtension
, BiosData
))
1809 /* This is considered failure, and new data will be saved */
1810 Status
= STATUS_UNSUCCESSFUL
;
1814 /* Data is still correct, check for interrupt line change */
1815 if (BiosData
->u
.type0
.InterruptLine
!=
1816 PciData
->u
.type0
.InterruptLine
)
1818 /* Update the current BIOS with the saved interrupt line */
1819 PciWriteDeviceConfig(NewExtension
,
1820 &BiosData
->u
.type0
.InterruptLine
,
1821 FIELD_OFFSET(PCI_COMMON_HEADER
,
1822 u
.type0
.InterruptLine
),
1826 /* Save the BIOS interrupt line and the initial command */
1827 NewExtension
->RawInterruptLine
= BiosData
->u
.type0
.InterruptLine
;
1828 NewExtension
->InitialCommand
= BiosData
->Command
;
1832 /* Check if no saved data was present or if it was a mismatch */
1833 if (!NT_SUCCESS(Status
))
1835 /* Save the new data */
1836 Status
= PciSaveBiosConfig(NewExtension
, PciData
);
1837 ASSERT(NT_SUCCESS(Status
));
1839 /* Save the interrupt line and command from the device */
1840 NewExtension
->RawInterruptLine
= PciData
->u
.type0
.InterruptLine
;
1841 NewExtension
->InitialCommand
= PciData
->Command
;
1844 /* Save original command from the device and hack flags */
1845 NewExtension
->CommandEnables
= PciData
->Command
;
1846 NewExtension
->HackFlags
= HackFlags
;
1848 /* Get power, AGP, and other capability data */
1849 PciGetEnhancedCapabilities(NewExtension
, PciData
);
1851 /* Now configure the BARs */
1852 Status
= PciGetFunctionLimits(NewExtension
, PciData
, HackFlags
);
1854 /* Power up the device */
1855 PciSetPowerManagedDevicePowerState(NewExtension
, PowerDeviceD0
, FALSE
);
1857 /* Apply any device hacks required for enumeration */
1858 PciApplyHacks(DeviceExtension
,
1861 PCI_HACK_FIXUP_AFTER_CONFIGURATION
,
1864 /* Save interrupt pin */
1865 NewExtension
->InterruptPin
= PciData
->u
.type0
.InterruptPin
;
1868 * Use either this device's actual IRQ line or, if it's connected on
1869 * a master bus whose IRQ line is actually connected to the host, use
1870 * the HAL to query the bus' IRQ line and store that as the adjusted
1871 * interrupt line instead
1873 NewExtension
->AdjustedInterruptLine
= PciGetAdjustedInterruptLine(NewExtension
);
1875 /* Check if this device is used for PCI debugger cards */
1876 NewExtension
->OnDebugPath
= PciIsDeviceOnDebugPath(NewExtension
);
1878 /* Check for devices with invalid/bogus subsystem data */
1879 if (HackFlags
& PCI_HACK_NO_SUBSYSTEM
)
1881 /* Set the subsystem information to zero instead */
1882 NewExtension
->SubsystemVendorId
= 0;
1883 NewExtension
->SubsystemId
= 0;
1886 /* Scan all capabilities */
1887 CapOffset
= NewExtension
->CapabilitiesPtr
;
1890 /* Read this header */
1891 TempOffset
= PciReadDeviceCapability(NewExtension
,
1895 sizeof(PCI_CAPABILITIES_HEADER
));
1896 if (TempOffset
!= CapOffset
)
1898 /* This is a strange issue that shouldn't happen normally */
1899 DPRINT1("PCI - Failed to read PCI capability at offset 0x%02x\n",
1901 ASSERT(TempOffset
== CapOffset
);
1904 /* Check for capabilities that this driver cares about */
1905 switch (CapHeader
.CapabilityID
)
1907 /* Power management capability is heavily used by the bus */
1908 case PCI_CAPABILITY_ID_POWER_MANAGEMENT
:
1910 /* Dump the capability */
1912 Size
= sizeof(PCI_PM_CAPABILITY
);
1915 /* AGP capability is required for AGP bus functionality */
1916 case PCI_CAPABILITY_ID_AGP
:
1918 /* Dump the capability */
1920 Size
= sizeof(PCI_AGP_CAPABILITY
);
1923 /* This driver doesn't really use anything other than that */
1926 /* Windows prints this, we could do a translation later */
1927 Name
= "UNKNOWN CAPABILITY";
1932 /* Check if this is a capability that should be dumped */
1935 /* Read the whole capability data */
1936 TempOffset
= PciReadDeviceCapability(NewExtension
,
1938 CapHeader
.CapabilityID
,
1942 if (TempOffset
!= CapOffset
)
1944 /* Again, a strange issue that shouldn't be seen */
1945 DPRINT1("- Failed to read capability data. ***\n");
1946 ASSERT(TempOffset
== CapOffset
);
1950 /* Dump this capability */
1951 DPRINT1("CAP @%02x ID %02x (%s)\n",
1952 CapOffset
, CapHeader
.CapabilityID
, Name
);
1953 for (i
= 0; i
< Size
; i
+= 2)
1954 DPRINT1(" %04x\n", *(PUSHORT
)((ULONG_PTR
)&CapHeader
+ i
));
1957 /* Check the next capability */
1958 CapOffset
= CapHeader
.Next
;
1961 /* Check for IDE controllers */
1962 if ((NewExtension
->BaseClass
== PCI_CLASS_MASS_STORAGE_CTLR
) &&
1963 (NewExtension
->SubClass
== PCI_SUBCLASS_MSC_IDE_CTLR
))
1965 /* Do not allow them to power down completely */
1966 NewExtension
->DisablePowerDown
= TRUE
;
1970 * Check if this is a legacy bridge. Note that the i82375 PCI/EISA
1971 * bridge that is present on certain NT Alpha machines appears as
1972 * non-classified so detect it manually by scanning for its VID/PID.
1974 if (((NewExtension
->BaseClass
== PCI_CLASS_BRIDGE_DEV
) &&
1975 ((NewExtension
->SubClass
== PCI_SUBCLASS_BR_ISA
) ||
1976 (NewExtension
->SubClass
== PCI_SUBCLASS_BR_EISA
) ||
1977 (NewExtension
->SubClass
== PCI_SUBCLASS_BR_MCA
))) ||
1978 ((NewExtension
->VendorId
== 0x8086) &&
1979 (NewExtension
->DeviceId
== 0x482)))
1981 /* Do not allow these legacy bridges to be powered down */
1982 NewExtension
->DisablePowerDown
= TRUE
;
1985 /* Check if the BIOS did not configure a cache line size */
1986 if (!PciData
->CacheLineSize
)
1988 /* Check if the device is disabled */
1989 if (!(NewExtension
->CommandEnables
& (PCI_ENABLE_IO_SPACE
|
1990 PCI_ENABLE_MEMORY_SPACE
|
1991 PCI_ENABLE_BUS_MASTER
)))
1993 /* Check if this is a PCI-X device*/
1994 TempOffset
= PciReadDeviceCapability(NewExtension
,
1995 NewExtension
->CapabilitiesPtr
,
1996 PCI_CAPABILITY_ID_PCIX
,
1998 sizeof(PCI_CAPABILITIES_HEADER
));
2001 * A device with default cache line size and latency timer
2002 * settings is considered to be unconfigured. Note that on
2003 * PCI-X, the reset value of the latency timer field in the
2004 * header is 64, not 0, hence why the check for PCI-X caps
2005 * was required, and the value used here below.
2007 if (!(PciData
->LatencyTimer
) ||
2008 ((TempOffset
) && (PciData
->LatencyTimer
== 64)))
2010 /* Keep track of the fact that it needs configuration */
2011 DPRINT1("PCI - ScanBus, PDOx %p found unconfigured\n",
2013 NewExtension
->NeedsHotPlugConfiguration
= TRUE
;
2018 /* Save latency and cache size information */
2019 NewExtension
->SavedLatencyTimer
= PciData
->LatencyTimer
;
2020 NewExtension
->SavedCacheLineSize
= PciData
->CacheLineSize
;
2022 /* The PDO is now ready to go */
2023 DeviceObject
->Flags
&= ~DO_DEVICE_INITIALIZING
;
2027 /* Enumeration completed, do a final pass now that all devices are found */
2028 if (ProcessFlag
) PciProcessBus(DeviceExtension
);
2029 return STATUS_SUCCESS
;
2034 PciQueryDeviceRelations(IN PPCI_FDO_EXTENSION DeviceExtension
,
2035 IN OUT PDEVICE_RELATIONS
*pDeviceRelations
)
2038 PPCI_PDO_EXTENSION PdoExtension
;
2040 PDEVICE_RELATIONS DeviceRelations
, NewRelations
;
2042 PDEVICE_OBJECT DeviceObject
, *ObjectArray
;
2045 /* Make sure the FDO is started */
2046 ASSERT(DeviceExtension
->DeviceState
== PciStarted
);
2048 /* Synchronize while we enumerate the bus */
2049 Status
= PciBeginStateTransition(DeviceExtension
, PciSynchronizedOperation
);
2050 if (!NT_SUCCESS(Status
)) return Status
;
2052 /* Scan all children PDO */
2053 for (PdoExtension
= DeviceExtension
->ChildPdoList
;
2055 PdoExtension
= PdoExtension
->Next
)
2057 /* Invalidate them */
2058 PdoExtension
->NotPresent
= TRUE
;
2061 /* Scan the PCI Bus */
2062 Status
= PciScanBus(DeviceExtension
);
2063 ASSERT(NT_SUCCESS(Status
));
2065 /* Enumerate all children PDO again */
2066 for (PdoExtension
= DeviceExtension
->ChildPdoList
;
2068 PdoExtension
= PdoExtension
->Next
)
2070 /* Check for PDOs that are still invalidated */
2071 if (PdoExtension
->NotPresent
)
2073 /* This means this PDO existed before, but not anymore */
2074 PdoExtension
->ReportedMissing
= TRUE
;
2075 DPRINT1("PCI - Old device (pdox) %p not found on rescan.\n",
2080 /* Increase count of detected PDOs */
2085 /* Read the current relations and add the newly discovered relations */
2086 DeviceRelations
= *pDeviceRelations
;
2087 Size
= FIELD_OFFSET(DEVICE_RELATIONS
, Objects
) +
2088 PdoCount
* sizeof(PDEVICE_OBJECT
);
2089 if (DeviceRelations
) Size
+= sizeof(PDEVICE_OBJECT
) * DeviceRelations
->Count
;
2091 /* Allocate the device relations */
2092 NewRelations
= (PDEVICE_RELATIONS
)ExAllocatePoolWithTag(0, Size
, 'BicP');
2095 /* Out of space, cancel the operation */
2096 PciCancelStateTransition(DeviceExtension
, PciSynchronizedOperation
);
2097 return STATUS_INSUFFICIENT_RESOURCES
;
2100 /* Check if there were any older relations */
2101 NewRelations
->Count
= 0;
2102 if (DeviceRelations
)
2104 /* Copy the old relations into the new buffer, then free the old one */
2105 RtlCopyMemory(NewRelations
,
2107 FIELD_OFFSET(DEVICE_RELATIONS
, Objects
) +
2108 DeviceRelations
->Count
* sizeof(PDEVICE_OBJECT
));
2109 ExFreePoolWithTag(DeviceRelations
, 0);
2112 /* Print out that we're ready to dump relations */
2113 DPRINT1("PCI QueryDeviceRelations/BusRelations FDOx %p (bus 0x%02x)\n",
2115 DeviceExtension
->BaseBus
);
2117 /* Loop the current PDO children and the device relation object array */
2118 PdoExtension
= DeviceExtension
->ChildPdoList
;
2119 ObjectArray
= &NewRelations
->Objects
[NewRelations
->Count
];
2120 while (PdoExtension
)
2122 /* Dump this relation */
2123 DPRINT1(" QDR PDO %p (x %p)%s\n",
2124 PdoExtension
->PhysicalDeviceObject
,
2126 PdoExtension
->NotPresent
?
2127 "<Omitted, device flaged not present>" : "");
2129 /* Is this PDO present? */
2130 if (!PdoExtension
->NotPresent
)
2132 /* Reference it and add it to the array */
2133 DeviceObject
= PdoExtension
->PhysicalDeviceObject
;
2134 ObReferenceObject(DeviceObject
);
2135 *ObjectArray
++ = DeviceObject
;
2138 /* Go to the next PDO */
2139 PdoExtension
= PdoExtension
->Next
;
2142 /* Terminate dumping the relations */
2143 DPRINT1(" QDR Total PDO count = %u (%u already in list)\n",
2144 NewRelations
->Count
+ PdoCount
,
2145 NewRelations
->Count
);
2147 /* Return the final count and the new buffer */
2148 NewRelations
->Count
+= PdoCount
;
2149 *pDeviceRelations
= NewRelations
;
2150 return STATUS_SUCCESS
;
2155 PciSetResources(IN PPCI_PDO_EXTENSION PdoExtension
,
2157 IN BOOLEAN SomethingSomethingDarkSide
)
2159 PPCI_FDO_EXTENSION FdoExtension
;
2160 UCHAR NewCacheLineSize
, NewLatencyTimer
;
2161 PCI_COMMON_HEADER PciData
;
2163 PPCI_CONFIGURATOR Configurator
;
2165 UNREFERENCED_PARAMETER(SomethingSomethingDarkSide
);
2167 /* Get the FDO and read the configuration data */
2168 FdoExtension
= PdoExtension
->ParentFdoExtension
;
2169 PciReadDeviceConfig(PdoExtension
, &PciData
, 0, PCI_COMMON_HDR_LENGTH
);
2171 /* Make sure this is still the same device */
2172 if (!PcipIsSameDevice(PdoExtension
, &PciData
))
2175 ASSERTMSG("PCI Set resources - not same device", FALSE
);
2176 return STATUS_DEVICE_DOES_NOT_EXIST
;
2179 /* Nothing to set for a host bridge */
2180 if ((PdoExtension
->BaseClass
== PCI_CLASS_BRIDGE_DEV
) &&
2181 (PdoExtension
->SubClass
== PCI_SUBCLASS_BR_HOST
))
2184 return STATUS_SUCCESS
;
2187 /* Check if an IDE controller is being reset */
2189 (PdoExtension
->BaseClass
== PCI_CLASS_MASS_STORAGE_CTLR
) &&
2190 (PdoExtension
->SubClass
== PCI_SUBCLASS_MSC_IDE_CTLR
))
2192 /* Turn off native mode */
2193 Native
= PciConfigureIdeController(PdoExtension
, &PciData
, FALSE
);
2194 ASSERT(Native
== PdoExtension
->IDEInNativeMode
);
2197 /* Check for update of a hotplug device, or first configuration of one */
2198 if ((PdoExtension
->NeedsHotPlugConfiguration
) &&
2199 (FdoExtension
->HotPlugParameters
.Acquired
))
2201 /* Don't have hotplug devices to test with yet, QEMU 0.14 should */
2202 UNIMPLEMENTED_DBGBREAK();
2205 /* Locate the correct resource configurator for this type of device */
2206 Configurator
= &PciConfigurators
[PdoExtension
->HeaderType
];
2208 /* Apply the settings change */
2209 Configurator
->ChangeResourceSettings(PdoExtension
, &PciData
);
2211 /* Assume no update needed */
2212 PdoExtension
->UpdateHardware
= FALSE
;
2214 /* Check if a reset is needed */
2217 /* Reset resources */
2218 Configurator
->ResetDevice(PdoExtension
, &PciData
);
2219 PciData
.u
.type0
.InterruptLine
= PdoExtension
->RawInterruptLine
;
2222 /* Check if the latency timer changed */
2223 NewLatencyTimer
= PdoExtension
->SavedLatencyTimer
;
2224 if (PciData
.LatencyTimer
!= NewLatencyTimer
)
2226 /* Debug notification */
2227 DPRINT1("PCI (pdox %p) changing latency from %02x to %02x.\n",
2229 PciData
.LatencyTimer
,
2233 /* Check if the cache line changed */
2234 NewCacheLineSize
= PdoExtension
->SavedCacheLineSize
;
2235 if (PciData
.CacheLineSize
!= NewCacheLineSize
)
2237 /* Debug notification */
2238 DPRINT1("PCI (pdox %p) changing cache line size from %02x to %02x.\n",
2240 PciData
.CacheLineSize
,
2244 /* Inherit data from PDO extension */
2245 PciData
.LatencyTimer
= PdoExtension
->SavedLatencyTimer
;
2246 PciData
.CacheLineSize
= PdoExtension
->SavedCacheLineSize
;
2247 PciData
.u
.type0
.InterruptLine
= PdoExtension
->RawInterruptLine
;
2249 /* Apply any resource hacks required */
2250 PciApplyHacks(FdoExtension
,
2253 PCI_HACK_FIXUP_BEFORE_UPDATE
,
2256 /* Check if I/O space was disabled by administrator or driver */
2257 if (PdoExtension
->IoSpaceNotRequired
)
2259 /* Don't turn on the decode */
2260 PdoExtension
->CommandEnables
&= ~PCI_ENABLE_IO_SPACE
;
2263 /* Update the device with the new settings */
2264 PciUpdateHardware(PdoExtension
, &PciData
);
2266 /* Update complete */
2267 PdoExtension
->RawInterruptLine
= PciData
.u
.type0
.InterruptLine
;
2268 PdoExtension
->NeedsHotPlugConfiguration
= FALSE
;
2269 return STATUS_SUCCESS
;