lib/3rdparty/freetype/devel/ftoption.h

   1 /***************************************************************************/
   2 /*                                                                         */
   3 /*  ftoption.h (for development)                                           */
   4 /*                                                                         */
   5 /*    User-selectable configuration macros (specification only).           */
   6 /*                                                                         */
   7 /*  Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009,   */
   8 /*            2010 by                                                      */
   9 /*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
  10 /*                                                                         */
  11 /*  This file is part of the FreeType project, and may only be used,       */
  12 /*  modified, and distributed under the terms of the FreeType project      */
  13 /*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
  14 /*  this file you indicate that you have read the license and              */
  15 /*  understand and accept it fully.                                        */
  16 /*                                                                         */
  17 /***************************************************************************/
  18
  19
  20 #ifndef __FTOPTION_H__
  21 #define __FTOPTION_H__
  22
  23
  24 #include <ft2build.h>
  25
  26
  27 FT_BEGIN_HEADER
  28
  29   /*************************************************************************/
  30   /*                                                                       */
  31   /*                 USER-SELECTABLE CONFIGURATION MACROS                  */
  32   /*                                                                       */
  33   /* This file contains the default configuration macro definitions for    */
  34   /* a standard build of the FreeType library.  There are three ways to    */
  35   /* use this file to build project-specific versions of the library:      */
  36   /*                                                                       */
  37   /*  - You can modify this file by hand, but this is not recommended in   */
  38   /*    cases where you would like to build several versions of the        */
  39   /*    library from a single source directory.                            */
  40   /*                                                                       */
  41   /*  - You can put a copy of this file in your build directory, more      */
  42   /*    precisely in `$BUILD/freetype/config/ftoption.h', where `$BUILD'   */
  43   /*    is the name of a directory that is included _before_ the FreeType  */
  44   /*    include path during compilation.                                   */
  45   /*                                                                       */
  46   /*    The default FreeType Makefiles and Jamfiles use the build          */
  47   /*    directory `builds/<system>' by default, but you can easily change  */
  48   /*    that for your own projects.                                        */
  49   /*                                                                       */
  50   /*  - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it    */
  51   /*    slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to       */
  52   /*    locate this file during the build.  For example,                   */
  53   /*                                                                       */
  54   /*      #define FT_CONFIG_OPTIONS_H  <myftoptions.h>                     */
  55   /*      #include <freetype/config/ftheader.h>                            */
  56   /*                                                                       */
  57   /*    will use `$BUILD/myftoptions.h' instead of this file for macro     */
  58   /*    definitions.                                                       */
  59   /*                                                                       */
  60   /*    Note also that you can similarly pre-define the macro              */
  61   /*    FT_CONFIG_MODULES_H used to locate the file listing of the modules */
  62   /*    that are statically linked to the library at compile time.  By     */
  63   /*    default, this file is <freetype/config/ftmodule.h>.                */
  64   /*                                                                       */
  65   /*  We highly recommend using the third method whenever possible.        */
  66   /*                                                                       */
  67   /*************************************************************************/
  68
  69
  70   /*************************************************************************/
  71   /*************************************************************************/
  72   /****                                                                 ****/
  73   /**** G E N E R A L   F R E E T Y P E   2   C O N F I G U R A T I O N ****/
  74   /****                                                                 ****/
  75   /*************************************************************************/
  76   /*************************************************************************/
  77
  78
  79   /*************************************************************************/
  80   /*                                                                       */
  81   /* Uncomment the line below if you want to activate sub-pixel rendering  */
  82   /* (a.k.a. LCD rendering, or ClearType) in this build of the library.    */
  83   /*                                                                       */
  84   /* Note that this feature is covered by several Microsoft patents        */
  85   /* and should not be activated in any default build of the library.      */
  86   /*                                                                       */
  87   /* This macro has no impact on the FreeType API, only on its             */
  88   /* _implementation_.  For example, using FT_RENDER_MODE_LCD when calling */
  89   /* FT_Render_Glyph still generates a bitmap that is 3 times wider than   */
  90   /* the original size in case this macro isn't defined; however, each     */
  91   /* triplet of subpixels has R=G=B.                                       */
  92   /*                                                                       */
  93   /* This is done to allow FreeType clients to run unmodified, forcing     */
  94   /* them to display normal gray-level anti-aliased glyphs.                */
  95   /*                                                                       */
  96 #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING
  97
  98
  99   /*************************************************************************/
 100   /*                                                                       */
 101   /* Many compilers provide a non-ANSI 64-bit data type that can be used   */
 102   /* by FreeType to speed up some computations.  However, this will create */
 103   /* some problems when compiling the library in strict ANSI mode.         */
 104   /*                                                                       */
 105   /* For this reason, the use of 64-bit integers is normally disabled when */
 106   /* the __STDC__ macro is defined.  You can however disable this by       */
 107   /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here.                 */
 108   /*                                                                       */
 109   /* For most compilers, this will only create compilation warnings when   */
 110   /* building the library.                                                 */
 111   /*                                                                       */
 112   /* ObNote: The compiler-specific 64-bit integers are detected in the     */
 113   /*         file `ftconfig.h' either statically or through the            */
 114   /*         `configure' script on supported platforms.                    */
 115   /*                                                                       */
 116 #undef FT_CONFIG_OPTION_FORCE_INT64
 117
 118
 119   /*************************************************************************/
 120   /*                                                                       */
 121   /* If this macro is defined, do not try to use an assembler version of   */
 122   /* performance-critical functions (e.g. FT_MulFix).  You should only do  */
 123   /* that to verify that the assembler function works properly, or to      */
 124   /* execute benchmark tests of the various implementations.               */
 125 /* #define FT_CONFIG_OPTION_NO_ASSEMBLER */
 126
 127
 128   /*************************************************************************/
 129   /*                                                                       */
 130   /* If this macro is defined, try to use an inlined assembler version of  */
 131   /* the `FT_MulFix' function, which is a `hotspot' when loading and       */
 132   /* hinting glyphs, and which should be executed as fast as possible.     */
 133   /*                                                                       */
 134   /* Note that if your compiler or CPU is not supported, this will default */
 135   /* to the standard and portable implementation found in `ftcalc.c'.      */
 136   /*                                                                       */
 137 #define FT_CONFIG_OPTION_INLINE_MULFIX
 138
 139
 140   /*************************************************************************/
 141   /*                                                                       */
 142   /* LZW-compressed file support.                                          */
 143   /*                                                                       */
 144   /*   FreeType now handles font files that have been compressed with the  */
 145   /*   `compress' program.  This is mostly used to parse many of the PCF   */
 146   /*   files that come with various X11 distributions.  The implementation */
 147   /*   uses NetBSD's `zopen' to partially uncompress the file on the fly   */
 148   /*   (see src/lzw/ftgzip.c).                                             */
 149   /*                                                                       */
 150   /*   Define this macro if you want to enable this `feature'.             */
 151   /*                                                                       */
 152 #define FT_CONFIG_OPTION_USE_LZW
 153
 154
 155   /*************************************************************************/
 156   /*                                                                       */
 157   /* Gzip-compressed file support.                                         */
 158   /*                                                                       */
 159   /*   FreeType now handles font files that have been compressed with the  */
 160   /*   `gzip' program.  This is mostly used to parse many of the PCF files */
 161   /*   that come with XFree86.  The implementation uses `zlib' to          */
 162   /*   partially uncompress the file on the fly (see src/gzip/ftgzip.c).   */
 163   /*                                                                       */
 164   /*   Define this macro if you want to enable this `feature'.  See also   */
 165   /*   the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below.                       */
 166   /*                                                                       */
 167 #define FT_CONFIG_OPTION_USE_ZLIB
 168
 169
 170   /*************************************************************************/
 171   /*                                                                       */
 172   /* ZLib library selection                                                */
 173   /*                                                                       */
 174   /*   This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined.  */
 175   /*   It allows FreeType's `ftgzip' component to link to the system's     */
 176   /*   installation of the ZLib library.  This is useful on systems like   */
 177   /*   Unix or VMS where it generally is already available.                */
 178   /*                                                                       */
 179   /*   If you let it undefined, the component will use its own copy        */
 180   /*   of the zlib sources instead.  These have been modified to be        */
 181   /*   included directly within the component and *not* export external    */
 182   /*   function names.  This allows you to link any program with FreeType  */
 183   /*   _and_ ZLib without linking conflicts.                               */
 184   /*                                                                       */
 185   /*   Do not #undef this macro here since the build system might define   */
 186   /*   it for certain configurations only.                                 */
 187   /*                                                                       */
 188 /* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */
 189
 190
 191   /*************************************************************************/
 192   /*                                                                       */
 193   /* DLL export compilation                                                */
 194   /*                                                                       */
 195   /*   When compiling FreeType as a DLL, some systems/compilers need a     */
 196   /*   special keyword in front OR after the return type of function       */
 197   /*   declarations.                                                       */
 198   /*                                                                       */
 199   /*   Two macros are used within the FreeType source code to define       */
 200   /*   exported library functions: FT_EXPORT and FT_EXPORT_DEF.            */
 201   /*                                                                       */
 202   /*     FT_EXPORT( return_type )                                          */
 203   /*                                                                       */
 204   /*       is used in a function declaration, as in                        */
 205   /*                                                                       */
 206   /*         FT_EXPORT( FT_Error )                                         */
 207   /*         FT_Init_FreeType( FT_Library*  alibrary );                    */
 208   /*                                                                       */
 209   /*                                                                       */
 210   /*     FT_EXPORT_DEF( return_type )                                      */
 211   /*                                                                       */
 212   /*       is used in a function definition, as in                         */
 213   /*                                                                       */
 214   /*         FT_EXPORT_DEF( FT_Error )                                     */
 215   /*         FT_Init_FreeType( FT_Library*  alibrary )                     */
 216   /*         {                                                             */
 217   /*           ... some code ...                                           */
 218   /*           return FT_Err_Ok;                                           */
 219   /*         }                                                             */
 220   /*                                                                       */
 221   /*   You can provide your own implementation of FT_EXPORT and            */
 222   /*   FT_EXPORT_DEF here if you want.  If you leave them undefined, they  */
 223   /*   will be later automatically defined as `extern return_type' to      */
 224   /*   allow normal compilation.                                           */
 225   /*                                                                       */
 226   /*   Do not #undef these macros here since the build system might define */
 227   /*   them for certain configurations only.                               */
 228   /*                                                                       */
 229 /* #define FT_EXPORT(x)      extern x */
 230 /* #define FT_EXPORT_DEF(x)  x */
 231
 232
 233   /*************************************************************************/
 234   /*                                                                       */
 235   /* Glyph Postscript Names handling                                       */
 236   /*                                                                       */
 237   /*   By default, FreeType 2 is compiled with the `psnames' module.  This */
 238   /*   module is in charge of converting a glyph name string into a        */
 239   /*   Unicode value, or return a Macintosh standard glyph name for the    */
 240   /*   use with the TrueType `post' table.                                 */
 241   /*                                                                       */
 242   /*   Undefine this macro if you do not want `psnames' compiled in your   */
 243   /*   build of FreeType.  This has the following effects:                 */
 244   /*                                                                       */
 245   /*   - The TrueType driver will provide its own set of glyph names,      */
 246   /*     if you build it to support postscript names in the TrueType       */
 247   /*     `post' table.                                                     */
 248   /*                                                                       */
 249   /*   - The Type 1 driver will not be able to synthesize a Unicode        */
 250   /*     charmap out of the glyphs found in the fonts.                     */
 251   /*                                                                       */
 252   /*   You would normally undefine this configuration macro when building  */
 253   /*   a version of FreeType that doesn't contain a Type 1 or CFF driver.  */
 254   /*                                                                       */
 255 #define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
 256
 257
 258   /*************************************************************************/
 259   /*                                                                       */
 260   /* Postscript Names to Unicode Values support                            */
 261   /*                                                                       */
 262   /*   By default, FreeType 2 is built with the `PSNames' module compiled  */
 263   /*   in.  Among other things, the module is used to convert a glyph name */
 264   /*   into a Unicode value.  This is especially useful in order to        */
 265   /*   synthesize on the fly a Unicode charmap from the CFF/Type 1 driver  */
 266   /*   through a big table named the `Adobe Glyph List' (AGL).             */
 267   /*                                                                       */
 268   /*   Undefine this macro if you do not want the Adobe Glyph List         */
 269   /*   compiled in your `PSNames' module.  The Type 1 driver will not be   */
 270   /*   able to synthesize a Unicode charmap out of the glyphs found in the */
 271   /*   fonts.                                                              */
 272   /*                                                                       */
 273 #define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
 274
 275
 276   /*************************************************************************/
 277   /*                                                                       */
 278   /* Support for Mac fonts                                                 */
 279   /*                                                                       */
 280   /*   Define this macro if you want support for outline fonts in Mac      */
 281   /*   format (mac dfont, mac resource, macbinary containing a mac         */
 282   /*   resource) on non-Mac platforms.                                     */
 283   /*                                                                       */
 284   /*   Note that the `FOND' resource isn't checked.                        */
 285   /*                                                                       */
 286 #define FT_CONFIG_OPTION_MAC_FONTS
 287
 288
 289   /*************************************************************************/
 290   /*                                                                       */
 291   /* Guessing methods to access embedded resource forks                    */
 292   /*                                                                       */
 293   /*   Enable extra Mac fonts support on non-Mac platforms (e.g.           */
 294   /*   GNU/Linux).                                                         */
 295   /*                                                                       */
 296   /*   Resource forks which include fonts data are stored sometimes in     */
 297   /*   locations which users or developers don't expected.  In some cases, */
 298   /*   resource forks start with some offset from the head of a file.  In  */
 299   /*   other cases, the actual resource fork is stored in file different   */
 300   /*   from what the user specifies.  If this option is activated,         */
 301   /*   FreeType tries to guess whether such offsets or different file      */
 302   /*   names must be used.                                                 */
 303   /*                                                                       */
 304   /*   Note that normal, direct access of resource forks is controlled via */
 305   /*   the FT_CONFIG_OPTION_MAC_FONTS option.                              */
 306   /*                                                                       */
 307 #ifdef FT_CONFIG_OPTION_MAC_FONTS
 308 #define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
 309 #endif
 310
 311
 312   /*************************************************************************/
 313   /*                                                                       */
 314   /* Allow the use of FT_Incremental_Interface to load typefaces that      */
 315   /* contain no glyph data, but supply it via a callback function.         */
 316   /* This is required by clients supporting document formats which         */
 317   /* supply font data incrementally as the document is parsed, such        */
 318   /* as the Ghostscript interpreter for the PostScript language.           */
 319   /*                                                                       */
 320 #define FT_CONFIG_OPTION_INCREMENTAL
 321
 322
 323   /*************************************************************************/
 324   /*                                                                       */
 325   /* The size in bytes of the render pool used by the scan-line converter  */
 326   /* to do all of its work.                                                */
 327   /*                                                                       */
 328   /* This must be greater than 4KByte if you use FreeType to rasterize     */
 329   /* glyphs; otherwise, you may set it to zero to avoid unnecessary        */
 330   /* allocation of the render pool.                                        */
 331   /*                                                                       */
 332 #define FT_RENDER_POOL_SIZE  16384L
 333
 334
 335   /*************************************************************************/
 336   /*                                                                       */
 337   /* FT_MAX_MODULES                                                        */
 338   /*                                                                       */
 339   /*   The maximum number of modules that can be registered in a single    */
 340   /*   FreeType library object.  32 is the default.                        */
 341   /*                                                                       */
 342 #define FT_MAX_MODULES  32
 343
 344
 345   /*************************************************************************/
 346   /*                                                                       */
 347   /* Debug level                                                           */
 348   /*                                                                       */
 349   /*   FreeType can be compiled in debug or trace mode.  In debug mode,    */
 350   /*   errors are reported through the `ftdebug' component.  In trace      */
 351   /*   mode, additional messages are sent to the standard output during    */
 352   /*   execution.                                                          */
 353   /*                                                                       */
 354   /*   Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode.     */
 355   /*   Define FT_DEBUG_LEVEL_TRACE to build it in trace mode.              */
 356   /*                                                                       */
 357   /*   Don't define any of these macros to compile in `release' mode!      */
 358   /*                                                                       */
 359   /*   Do not #undef these macros here since the build system might define */
 360   /*   them for certain configurations only.                               */
 361   /*                                                                       */
 362 #define FT_DEBUG_LEVEL_ERROR
 363 #define FT_DEBUG_LEVEL_TRACE
 364
 365
 366   /*************************************************************************/
 367   /*                                                                       */
 368   /* Memory Debugging                                                      */
 369   /*                                                                       */
 370   /*   FreeType now comes with an integrated memory debugger that is       */
 371   /*   capable of detecting simple errors like memory leaks or double      */
 372   /*   deletes.  To compile it within your build of the library, you       */
 373   /*   should define FT_DEBUG_MEMORY here.                                 */
 374   /*                                                                       */
 375   /*   Note that the memory debugger is only activated at runtime when     */
 376   /*   when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */
 377   /*                                                                       */
 378   /*   Do not #undef this macro here since the build system might define   */
 379   /*   it for certain configurations only.                                 */
 380   /*                                                                       */
 381 #define FT_DEBUG_MEMORY
 382
 383
 384   /*************************************************************************/
 385   /*                                                                       */
 386   /* Module errors                                                         */
 387   /*                                                                       */
 388   /*   If this macro is set (which is _not_ the default), the higher byte  */
 389   /*   of an error code gives the module in which the error has occurred,  */
 390   /*   while the lower byte is the real error code.                        */
 391   /*                                                                       */
 392   /*   Setting this macro makes sense for debugging purposes only, since   */
 393   /*   it would break source compatibility of certain programs that use    */
 394   /*   FreeType 2.                                                         */
 395   /*                                                                       */
 396   /*   More details can be found in the files ftmoderr.h and fterrors.h.   */
 397   /*                                                                       */
 398 #undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
 399
 400
 401   /*************************************************************************/
 402   /*                                                                       */
 403   /* Position Independent Code                                             */
 404   /*                                                                       */
 405   /*   If this macro is set (which is _not_ the default), FreeType2 will   */
 406   /*   avoid creating constants that require address fixups.  Instead the  */
 407   /*   constants will be moved into a struct and additional intialization  */
 408   /*   code will be used.                                                  */
 409   /*                                                                       */
 410   /*   Setting this macro is needed for systems that prohibit address      */
 411   /*   fixups, such as BREW.                                               */
 412   /*                                                                       */
 413 /* #define FT_CONFIG_OPTION_PIC */
 414
 415
 416   /*************************************************************************/
 417   /*************************************************************************/
 418   /****                                                                 ****/
 419   /****        S F N T   D R I V E R    C O N F I G U R A T I O N       ****/
 420   /****                                                                 ****/
 421   /*************************************************************************/
 422   /*************************************************************************/
 423
 424
 425   /*************************************************************************/
 426   /*                                                                       */
 427   /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support       */
 428   /* embedded bitmaps in all formats using the SFNT module (namely         */
 429   /* TrueType & OpenType).                                                 */
 430   /*                                                                       */
 431 #define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
 432
 433
 434   /*************************************************************************/
 435   /*                                                                       */
 436   /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to    */
 437   /* load and enumerate the glyph Postscript names in a TrueType or        */
 438   /* OpenType file.                                                        */
 439   /*                                                                       */
 440   /* Note that when you do not compile the `PSNames' module by undefining  */
 441   /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will   */
 442   /* contain additional code used to read the PS Names table from a font.  */
 443   /*                                                                       */
 444   /* (By default, the module uses `PSNames' to extract glyph names.)       */
 445   /*                                                                       */
 446 #define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
 447
 448
 449   /*************************************************************************/
 450   /*                                                                       */
 451   /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to       */
 452   /* access the internal name table in a SFNT-based format like TrueType   */
 453   /* or OpenType.  The name table contains various strings used to         */
 454   /* describe the font, like family name, copyright, version, etc.  It     */
 455   /* does not contain any glyph name though.                               */
 456   /*                                                                       */
 457   /* Accessing SFNT names is done through the functions declared in        */
 458   /* `freetype/ftsnames.h'.                                                */
 459   /*                                                                       */
 460 #define TT_CONFIG_OPTION_SFNT_NAMES
 461
 462
 463   /*************************************************************************/
 464   /*                                                                       */
 465   /* TrueType CMap support                                                 */
 466   /*                                                                       */
 467   /*   Here you can fine-tune which TrueType CMap table format shall be    */
 468   /*   supported.                                                          */
 469 #define TT_CONFIG_CMAP_FORMAT_0
 470 #define TT_CONFIG_CMAP_FORMAT_2
 471 #define TT_CONFIG_CMAP_FORMAT_4
 472 #define TT_CONFIG_CMAP_FORMAT_6
 473 #define TT_CONFIG_CMAP_FORMAT_8
 474 #define TT_CONFIG_CMAP_FORMAT_10
 475 #define TT_CONFIG_CMAP_FORMAT_12
 476 #define TT_CONFIG_CMAP_FORMAT_13
 477 #define TT_CONFIG_CMAP_FORMAT_14
 478
 479
 480   /*************************************************************************/
 481   /*************************************************************************/
 482   /****                                                                 ****/
 483   /****    T R U E T Y P E   D R I V E R    C O N F I G U R A T I O N   ****/
 484   /****                                                                 ****/
 485   /*************************************************************************/
 486   /*************************************************************************/
 487
 488   /*************************************************************************/
 489   /*                                                                       */
 490   /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile   */
 491   /* a bytecode interpreter in the TrueType driver.  Note that there are   */
 492   /* important patent issues related to the use of the interpreter.        */
 493   /*                                                                       */
 494   /* By undefining this, you will only compile the code necessary to load  */
 495   /* TrueType glyphs without hinting.                                      */
 496   /*                                                                       */
 497   /*   Do not #undef this macro here, since the build system might         */
 498   /*   define it for certain configurations only.                          */
 499   /*                                                                       */
 500 #define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
 501
 502
 503   /*************************************************************************/
 504   /*                                                                       */
 505   /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version  */
 506   /* of the TrueType bytecode interpreter is used that doesn't implement   */
 507   /* any of the patented opcodes and algorithms.  Note that the            */
 508   /* TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored* if you define  */
 509   /* TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words, either define  */
 510   /* TT_CONFIG_OPTION_BYTECODE_INTERPRETER or                              */
 511   /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time.    */
 512   /*                                                                       */
 513   /* This macro is only useful for a small number of font files (mostly    */
 514   /* for Asian scripts) that require bytecode interpretation to properly   */
 515   /* load glyphs.  For all other fonts, this produces unpleasant results,  */
 516   /* thus the unpatented interpreter is never used to load glyphs from     */
 517   /* TrueType fonts unless one of the following two options is used.       */
 518   /*                                                                       */
 519   /*   - The unpatented interpreter is explicitly activated by the user    */
 520   /*     through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag         */
 521   /*     when opening the FT_Face.                                         */
 522   /*                                                                       */
 523   /*   - FreeType detects that the FT_Face corresponds to one of the       */
 524   /*     `trick' fonts (e.g., `Mingliu') it knows about.  The font engine  */
 525   /*     contains a hard-coded list of font names and other matching       */
 526   /*     parameters (see function `tt_face_init' in file                   */
 527   /*     `src/truetype/ttobjs.c').                                         */
 528   /*                                                                       */
 529   /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */
 530   /*                                                                       */
 531   /*   {                                                                   */
 532   /*     FT_Parameter  parameter;                                          */
 533   /*     FT_Open_Args  open_args;                                          */
 534   /*                                                                       */
 535   /*                                                                       */
 536   /*     parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING;                  */
 537   /*                                                                       */
 538   /*     open_args.flags      = FT_OPEN_PATHNAME | FT_OPEN_PARAMS;         */
 539   /*     open_args.pathname   = my_font_pathname;                          */
 540   /*     open_args.num_params = 1;                                         */
 541   /*     open_args.params     = &parameter;                                */
 542   /*                                                                       */
 543   /*     error = FT_Open_Face( library, &open_args, index, &face );        */
 544   /*     ...                                                               */
 545   /*   }                                                                   */
 546   /*                                                                       */
 547 /* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */
 548
 549
 550   /*************************************************************************/
 551   /*                                                                       */
 552   /* Define TT_CONFIG_OPTION_INTERPRETER_SWITCH to compile the TrueType    */
 553   /* bytecode interpreter with a huge switch statement, rather than a call */
 554   /* table.  This results in smaller and faster code for a number of       */
 555   /* architectures.                                                        */
 556   /*                                                                       */
 557   /* Note however that on some compiler/processor combinations, undefining */
 558   /* this macro will generate faster, though larger, code.                 */
 559   /*                                                                       */
 560 #define TT_CONFIG_OPTION_INTERPRETER_SWITCH
 561
 562
 563   /*************************************************************************/
 564   /*                                                                       */
 565   /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the        */
 566   /* TrueType glyph loader to use Apple's definition of how to handle      */
 567   /* component offsets in composite glyphs.                                */
 568   /*                                                                       */
 569   /* Apple and MS disagree on the default behavior of component offsets    */
 570   /* in composites.  Apple says that they should be scaled by the scaling  */
 571   /* factors in the transformation matrix (roughly, it's more complex)     */
 572   /* while MS says they should not.  OpenType defines two bits in the      */
 573   /* composite flags array which can be used to disambiguate, but old      */
 574   /* fonts will not have them.                                             */
 575   /*                                                                       */
 576   /*   http://partners.adobe.com/asn/developer/opentype/glyf.html          */
 577   /*   http://fonts.apple.com/TTRefMan/RM06/Chap6glyf.html                 */
 578   /*                                                                       */
 579 #undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
 580
 581
 582   /*************************************************************************/
 583   /*                                                                       */
 584   /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include         */
 585   /* support for Apple's distortable font technology (fvar, gvar, cvar,    */
 586   /* and avar tables).  This has many similarities to Type 1 Multiple      */
 587   /* Masters support.                                                      */
 588   /*                                                                       */
 589 #define TT_CONFIG_OPTION_GX_VAR_SUPPORT
 590
 591
 592   /*************************************************************************/
 593   /*                                                                       */
 594   /* Define TT_CONFIG_OPTION_BDF if you want to include support for        */
 595   /* an embedded `BDF ' table within SFNT-based bitmap formats.            */
 596   /*                                                                       */
 597 #define TT_CONFIG_OPTION_BDF
 598
 599
 600   /*************************************************************************/
 601   /*************************************************************************/
 602   /****                                                                 ****/
 603   /****      T Y P E 1   D R I V E R    C O N F I G U R A T I O N       ****/
 604   /****                                                                 ****/
 605   /*************************************************************************/
 606   /*************************************************************************/
 607
 608
 609   /*************************************************************************/
 610   /*                                                                       */
 611   /* T1_MAX_DICT_DEPTH is the maximal depth of nest dictionaries and       */
 612   /* arrays in the Type 1 stream (see t1load.c).  A minimum of 4 is        */
 613   /* required.                                                             */
 614   /*                                                                       */
 615 #define T1_MAX_DICT_DEPTH  5
 616
 617
 618   /*************************************************************************/
 619   /*                                                                       */
 620   /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine   */
 621   /* calls during glyph loading.                                           */
 622   /*                                                                       */
 623 #define T1_MAX_SUBRS_CALLS  16
 624
 625
 626   /*************************************************************************/
 627   /*                                                                       */
 628   /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity.  A     */
 629   /* minimum of 16 is required.                                            */
 630   /*                                                                       */
 631   /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
 632   /*                                                                       */
 633 #define T1_MAX_CHARSTRINGS_OPERANDS  256
 634
 635
 636   /*************************************************************************/
 637   /*                                                                       */
 638   /* Define this configuration macro if you want to prevent the            */
 639   /* compilation of `t1afm', which is in charge of reading Type 1 AFM      */
 640   /* files into an existing face.  Note that if set, the T1 driver will be */
 641   /* unable to produce kerning distances.                                  */
 642   /*                                                                       */
 643 #undef T1_CONFIG_OPTION_NO_AFM
 644
 645
 646   /*************************************************************************/
 647   /*                                                                       */
 648   /* Define this configuration macro if you want to prevent the            */
 649   /* compilation of the Multiple Masters font support in the Type 1        */
 650   /* driver.                                                               */
 651   /*                                                                       */
 652 #undef T1_CONFIG_OPTION_NO_MM_SUPPORT
 653
 654
 655   /*************************************************************************/
 656   /*************************************************************************/
 657   /****                                                                 ****/
 658   /****    A U T O F I T   M O D U L E    C O N F I G U R A T I O N     ****/
 659   /****                                                                 ****/
 660   /*************************************************************************/
 661   /*************************************************************************/
 662
 663
 664   /*************************************************************************/
 665   /*                                                                       */
 666   /* Compile autofit module with CJK (Chinese, Japanese, Korean) script    */
 667   /* support.                                                              */
 668   /*                                                                       */
 669 #define AF_CONFIG_OPTION_CJK
 670
 671   /*************************************************************************/
 672   /*                                                                       */
 673   /* Compile autofit module with Indic script support.                     */
 674   /*                                                                       */
 675 #define AF_CONFIG_OPTION_INDIC
 676
 677   /* */
 678
 679
 680   /*
 681    * Define this variable if you want to keep the layout of internal
 682    * structures that was used prior to FreeType 2.2.  This also compiles in
 683    * a few obsolete functions to avoid linking problems on typical Unix
 684    * distributions.
 685    *
 686    * For embedded systems or building a new distribution from scratch, it
 687    * is recommended to disable the macro since it reduces the library's code
 688    * size and activates a few memory-saving optimizations as well.
 689    */
 690 /* #define FT_CONFIG_OPTION_OLD_INTERNALS */
 691
 692
 693   /*
 694    * This macro is defined if either unpatented or native TrueType
 695    * hinting is requested by the definitions above.
 696    */
 697 #ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
 698 #define  TT_USE_BYTECODE_INTERPRETER
 699 #undef   TT_CONFIG_OPTION_UNPATENTED_HINTING
 700 #elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING
 701 #define  TT_USE_BYTECODE_INTERPRETER
 702 #endif
 703
 704 FT_END_HEADER
 705
 706
 707 #endif /* __FTOPTION_H__ */
 708
 709
 710 /* END */