lib/drivers/lwip/src/netif/FILES

   1 This directory contains generic network interface device drivers that
   2 do not contain any hardware or architecture specific code. The files
   3 are:
   4
   5 etharp.c
   6           Implements the ARP (Address Resolution Protocol) over
   7           Ethernet. The code in this file should be used together with
   8           Ethernet device drivers. Note that this module has been
   9           largely made Ethernet independent so you should be able to
  10           adapt this for other link layers (such as Firewire).
  11
  12 ethernetif.c
  13           An example of how an Ethernet device driver could look. This
  14           file can be used as a "skeleton" for developing new Ethernet
  15           network device drivers. It uses the etharp.c ARP code.
  16
  17 loopif.c
  18           A "loopback" network interface driver. It requires configuration
  19           through the define LWIP_LOOPIF_MULTITHREADING (see opt.h).
  20
  21 slipif.c
  22           A generic implementation of the SLIP (Serial Line IP)
  23           protocol. It requires a sio (serial I/O) module to work.
  24
  25 ppp/      Point-to-Point Protocol stack
  26           The PPP stack has been ported from ucip (http://ucip.sourceforge.net).
  27           It matches quite well to pppd 2.3.1 (http://ppp.samba.org), although
  28           compared to that, it has some modifications for embedded systems and
  29           the source code has been reordered a bit.