reactos/Makefile

   1 # Accepted environment variables:
   2 #
   3 #    ROS_PREFIX
   4 #        This variable specifies the prefix of the MinGW installation. On Windows
   5 #        a prefix is usually not needed, but on linux it is usually "mingw32". If
   6 #        not present and no executable named "gcc" can be found, then the prefix is
   7 #        assumed to be "mingw32". If your gcc is named i386-mingw32-gcc then set
   8 #        ROS_PREFIX to i386-mingw32. Don't include the dash (-) before gcc.
   9 #
  10 #    ROS_INTERMEDIATE
  11 #        This variable controls where to put intermediate files. Intermediate
  12 #        files are generated files that are needed to generate the final
  13 #        output files. Examples of intermediate files include *.o, *.a, and
  14 #        *.coff. N.B. Don't put a path separator at the end. The variable
  15 #        defaults to .\obj-i386.
  16 #
  17 #    ROS_OUTPUT
  18 #        This variable controls where to put output files. Output files are
  19 #        generated files that makes up the result of the build process.
  20 #        Examples of output files include *.exe, *.dll, and *.sys. N.B. Don't
  21 #        put a path separator at the end. The variable defaults to .\output-i386.
  22 #
  23 #    ROS_TEMPORARY
  24 #        This variable controls where to put temporary files. Temporary files
  25 #        are (usually small) generated files that are needed to generate the
  26 #        intermediate or final output files. Examples of temporary files include
  27 #        *.rci (preprocessed .rc files for wrc), *.tmp, and *.exp. N.B. Don't put
  28 #        a path separator at the end. The variable defaults to the current
  29 #        directory.
  30 #
  31 #    ROS_INSTALL
  32 #        This variable controls where to install output files to when using
  33 #        'make install'. N.B. Don't put a path separator at the end. The variable
  34 #        defaults to .\reactos.
  35 #
  36 #    ROS_BUILDMAP
  37 #        This variable controls if map files are to be generated for executable
  38 #        output files. Map files have the extension .map. The value can be either
  39 #        full (to build map files with assembly code), yes (to build map files
  40 #        without source code) or no (to not build any map files). The variable
  41 #        defaults to no.
  42 #
  43 #    ROS_BUILDNOSTRIP
  44 #        This variable controls if non-symbol-stripped versions are to be built
  45 #        of executable output files. Non-symbol-stripped executable output files
  46 #        have .nostrip added to the filename just before the extension. The value
  47 #        can be either yes (to build non-symbol-stripped versions of executable
  48 #        output files) or no (to not build non-symbol-stripped versions of
  49 #        executable output files). The variable defaults to no.
  50 #
  51 #    ROS_RBUILDFLAGS
  52 #        Pass parameters to rbuild.
  53 #            -v   Be verbose.
  54 #            -c   Clean as you go. Delete generated files as soon as they are not needed anymore.
  55 #            -d   Disable automatic dependencies.
  56 #            -mi  Let make handle creation of install directories. Rbuild will not generate the directories.
  57
  58 .PHONY: all
  59 .PHONY: clean
  60 all: makefile.auto
  61
  62
  63 .SUFFIXES:
  64
  65 ifeq ($(HOST),)
  66 ifeq ($(word 1,$(shell gcc -dumpmachine)),mingw32)
  67 HOST=mingw32-windows
  68 else
  69 HOST=mingw32-linux
  70 endif
  71 endif
  72
  73 # Default to half-verbose mode
  74 ifeq ($(VERBOSE),no)
  75   Q = @
  76   HALFVERBOSEECHO = no
  77   BUILDNO_QUIET = -q
  78 else
  79 ifeq ($(VERBOSE),full)
  80   Q =
  81   HALFVERBOSEECHO = no
  82   BUILDNO_QUIET =
  83 else
  84   Q = @
  85   HALFVERBOSEECHO = yes
  86   BUILDNO_QUIET = -q
  87 endif
  88 endif
  89 ifeq ($(HOST),mingw32-linux)
  90   QUOTE = "
  91 else
  92   QUOTE =
  93 endif
  94 ifeq ($(HALFVERBOSEECHO),yes)
  95   ECHO_CP      =@echo $(QUOTE)[COPY]     $@$(QUOTE)
  96   ECHO_MKDIR   =@echo $(QUOTE)[MKDIR]    $@$(QUOTE)
  97   ECHO_BUILDNO =@echo $(QUOTE)[BUILDNO]  $@$(QUOTE)
  98   ECHO_INVOKE  =@echo $(QUOTE)[INVOKE]   $<$(QUOTE)
  99   ECHO_PCH     =@echo $(QUOTE)[PCH]      $@$(QUOTE)
 100   ECHO_CC      =@echo $(QUOTE)[CC]       $<$(QUOTE)
 101   ECHO_GAS     =@echo $(QUOTE)[GAS]      $<$(QUOTE)
 102   ECHO_NASM    =@echo $(QUOTE)[NASM]     $<$(QUOTE)
 103   ECHO_AR      =@echo $(QUOTE)[AR]       $@$(QUOTE)
 104   ECHO_WINEBLD =@echo $(QUOTE)[WINEBLD]  $@$(QUOTE)
 105   ECHO_WRC     =@echo $(QUOTE)[WRC]      $@$(QUOTE)
 106   ECHO_WIDL    =@echo $(QUOTE)[WIDL]     $@$(QUOTE)
 107   ECHO_BIN2RES =@echo $(QUOTE)[BIN2RES]  $<$(QUOTE)
 108   ECHO_DLLTOOL =@echo $(QUOTE)[DLLTOOL]  $@$(QUOTE)
 109   ECHO_LD      =@echo $(QUOTE)[LD]       $@$(QUOTE)
 110   ECHO_NM      =@echo $(QUOTE)[NM]       $@$(QUOTE)
 111   ECHO_OBJDUMP =@echo $(QUOTE)[OBJDUMP]  $@$(QUOTE)
 112   ECHO_RBUILD  =@echo $(QUOTE)[RBUILD]   $@$(QUOTE)
 113   ECHO_RSYM    =@echo $(QUOTE)[RSYM]     $@$(QUOTE)
 114   ECHO_WMC     =@echo $(QUOTE)[WMC]      $@$(QUOTE)
 115   ECHO_NCI     =@echo $(QUOTE)[NCI]      $@$(QUOTE)
 116   ECHO_CABMAN  =@echo $(QUOTE)[CABMAN]   $<$(QUOTE)
 117   ECHO_CDMAKE  =@echo $(QUOTE)[CDMAKE]   $@$(QUOTE)
 118   ECHO_MKHIVE  =@echo $(QUOTE)[MKHIVE]   $@$(QUOTE)
 119   ECHO_REGTESTS=@echo $(QUOTE)[REGTESTS] $@$(QUOTE)
 120   ECHO_TEST    =@echo $(QUOTE)[TEST]     $@$(QUOTE)
 121 else
 122   ECHO_CP      =
 123   ECHO_MKDIR   =
 124   ECHO_BUILDNO =
 125   ECHO_INVOKE  =
 126   ECHO_PCH     =
 127   ECHO_CC      =
 128   ECHO_GAS     =
 129   ECHO_NASM    =
 130   ECHO_AR      =
 131   ECHO_WINEBLD =
 132   ECHO_WRC     =
 133   ECHO_WIDL    =
 134   ECHO_BIN2RES =
 135   ECHO_DLLTOOL =
 136   ECHO_LD      =
 137   ECHO_NM      =
 138   ECHO_OBJDUMP =
 139   ECHO_RBUILD  =
 140   ECHO_RSYM    =
 141   ECHO_WMC     =
 142   ECHO_NCI     =
 143   ECHO_CABMAN  =
 144   ECHO_CDMAKE  =
 145   ECHO_MKHIVE  =
 146   ECHO_REGTESTS=
 147   ECHO_TEST    =
 148 endif
 149
 150
 151 host_gcc = $(Q)gcc
 152 host_gpp = $(Q)g++
 153 host_ld = $(Q)ld
 154 host_ar = $(Q)ar
 155 host_objcopy = $(Q)objcopy
 156 ifeq ($(HOST),mingw32-linux)
 157         EXEPREFIX = ./
 158         EXEPOSTFIX =
 159         SEP = /
 160         mkdir = -$(Q)mkdir -p
 161         gcc = $(Q)$(PREFIX)-gcc
 162         gpp = $(Q)$(PREFIX)-g++
 163         ld = $(Q)$(PREFIX)-ld
 164         nm = $(Q)$(PREFIX)-nm
 165         objdump = $(Q)$(PREFIX)-objdump
 166         ar = $(Q)$(PREFIX)-ar
 167         objcopy = $(Q)$(PREFIX)-objcopy
 168         dlltool = $(Q)$(PREFIX)-dlltool
 169         windres = $(Q)$(PREFIX)-windres
 170         rm = $(Q)rm -f
 171         cp = $(Q)cp
 172         NUL = /dev/null
 173 else # mingw32-windows
 174         EXEPREFIX =
 175         EXEPOSTFIX = .exe
 176         ROS_EMPTY =
 177         SEP = \$(ROS_EMPTY)
 178         mkdir = -$(Q)mkdir
 179         gcc = $(Q)gcc
 180         gpp = $(Q)g++
 181         ld = $(Q)ld
 182         nm = $(Q)nm
 183         objdump = $(Q)objdump
 184         ar = $(Q)ar
 185         objcopy = $(Q)objcopy
 186         dlltool = $(Q)dlltool
 187         windres = $(Q)windres
 188         rm = $(Q)del /f /q
 189         cp = $(Q)copy /y
 190         NUL = NUL
 191 endif
 192
 193 ifneq ($(ROS_INTERMEDIATE),)
 194   INTERMEDIATE := $(ROS_INTERMEDIATE)
 195 else
 196   INTERMEDIATE := obj-i386
 197 endif
 198 INTERMEDIATE_ := $(INTERMEDIATE)$(SEP)
 199
 200 ifneq ($(ROS_OUTPUT),)
 201   OUTPUT := $(ROS_OUTPUT)
 202 else
 203   OUTPUT := output-i386
 204 endif
 205 OUTPUT_ := $(OUTPUT)$(SEP)
 206
 207 ifneq ($(ROS_TEMPORARY),)
 208   TEMPORARY := $(ROS_TEMPORARY)
 209 else
 210   TEMPORARY :=
 211 endif
 212 TEMPORARY_ := $(TEMPORARY)$(SEP)
 213
 214 ifneq ($(ROS_INSTALL),)
 215   INSTALL := $(ROS_INSTALL)
 216 else
 217   INSTALL := reactos
 218 endif
 219 INSTALL_ := $(INSTALL)$(SEP)
 220
 221 $(INTERMEDIATE):
 222         ${mkdir} $@
 223
 224 ifneq ($(INTERMEDIATE),$(OUTPUT))
 225 $(OUTPUT):
 226         ${mkdir} $@
 227 endif
 228
 229
 230 NTOSKRNL_MC = ntoskrnl$(SEP)ntoskrnl.mc
 231 KERNEL32_MC = lib$(SEP)kernel32$(SEP)kernel32.mc
 232 BUILDNO_H = include$(SEP)reactos$(SEP)buildno.h
 233 BUGCODES_H = include$(SEP)reactos$(SEP)bugcodes.h
 234 BUGCODES_RC = ntoskrnl$(SEP)bugcodes.rc
 235 ERRCODES_H = include$(SEP)reactos$(SEP)errcodes.h
 236 ERRCODES_RC = lib$(SEP)kernel32$(SEP)errcodes.rc
 237
 238 include lib/lib.mak
 239 include tools/tools.mak
 240 -include makefile.auto
 241
 242 PREAUTO := \
 243         $(BIN2RES_TARGET) \
 244         $(BUILDNO_H) \
 245         $(BUGCODES_H) \
 246         $(BUGCODES_RC) \
 247         $(ERRCODES_H) \
 248         $(ERRCODES_RC) \
 249         $(NCI_SERVICE_FILES)
 250
 251 makefile.auto: $(RBUILD_TARGET) $(PREAUTO) $(XMLBUILDFILES)
 252         $(ECHO_RBUILD)
 253         $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) mingw
 254
 255
 256 $(BUGCODES_H) $(BUGCODES_RC): $(WMC_TARGET) $(NTOSKRNL_MC)
 257         $(ECHO_WMC)
 258         $(Q)$(WMC_TARGET) -i -H $(BUGCODES_H) -o $(BUGCODES_RC) $(NTOSKRNL_MC)
 259
 260 $(ERRCODES_H) $(ERRCODES_RC): $(WMC_TARGET) $(KERNEL32_MC)
 261         $(ECHO_WMC)
 262         $(Q)$(WMC_TARGET) -i -H $(ERRCODES_H) -o $(ERRCODES_RC) $(KERNEL32_MC)
 263
 264 .PHONY: makefile_auto_clean
 265 makefile_auto_clean:
 266         -@$(rm) makefile.auto $(PREAUTO) 2>$(NUL)
 267
 268 .PHONY: clean
 269 clean: makefile_auto_clean
 270
 271 .PHONY: depends
 272 depends:
 273         @-$(rm) makefile.auto
 274         @$(MAKE) $(filter-out depends, $(MAKECMDGOALS))