reactos/Makefile

   1 # Accepted environment variables:
   2 #
   3 #    ROS_PREFIX
   4 #        This variable specifies the prefix of the MinGW installation. On Windows
   5 #        a prefix is usually not needed, but on linux it is usually "mingw32". If
   6 #        not present and no executable named "gcc" can be found, then the prefix is
   7 #        assumed to be "mingw32". If your gcc is named i386-mingw32-gcc then set
   8 #        ROS_PREFIX to i386-mingw32. Don't include the dash (-) before gcc.
   9 #
  10 #    ROS_INTERMEDIATE
  11 #        This variable controls where to put intermediate files. Intermediate
  12 #        files are generated files that are needed to generate the final
  13 #        output files. Examples of intermediate files include *.o, *.a, and
  14 #        *.coff. N.B. Don't put a path separator at the end. The variable
  15 #        defaults to .\obj-i386.
  16 #
  17 #    ROS_OUTPUT
  18 #        This variable controls where to put output files. Output files are
  19 #        generated files that makes up the result of the build process.
  20 #        Examples of output files include *.exe, *.dll, and *.sys. N.B. Don't
  21 #        put a path separator at the end. The variable defaults to .\output-i386.
  22 #
  23 #    ROS_TEMPORARY
  24 #        This variable controls where to put temporary files. Temporary files
  25 #        are (usually small) generated files that are needed to generate the
  26 #        intermediate or final output files. Examples of temporary files include
  27 #        *.rci (preprocessed .rc files for wrc), *.tmp, and *.exp. N.B. Don't put
  28 #        a path separator at the end. The variable defaults to the current
  29 #        directory.
  30 #
  31 #    ROS_INSTALL
  32 #        This variable controls where to install output files to when using
  33 #        'make install'. N.B. Don't put a path separator at the end. The variable
  34 #        defaults to .\reactos.
  35 #
  36 #    ROS_BUILDMAP
  37 #        This variable controls if map files are to be generated for executable
  38 #        output files. Map files have the extension .map. The value can be either
  39 #        full (to build map files with assembly code), yes (to build map files
  40 #        without source code) or no (to not build any map files). The variable
  41 #        defaults to no.
  42 #
  43 #    ROS_BUILDNOSTRIP
  44 #        This variable controls if non-symbol-stripped versions are to be built
  45 #        of executable output files. Non-symbol-stripped executable output files
  46 #        have .nostrip added to the filename just before the extension. The value
  47 #        can be either yes (to build non-symbol-stripped versions of executable
  48 #        output files) or no (to not build non-symbol-stripped versions of
  49 #        executable output files). The variable defaults to no.
  50 #
  51 #    ROS_RBUILDFLAGS
  52 #        Pass parameters to rbuild.
  53
  54 .PHONY: all
  55 .PHONY: clean
  56 all: makefile.auto
  57
  58
  59 .SUFFIXES:
  60
  61 ifeq ($(HOST),)
  62 ifeq ($(word 1,$(shell gcc -dumpmachine)),mingw32)
  63 HOST=mingw32-windows
  64 else
  65 HOST=mingw32-linux
  66 endif
  67 endif
  68
  69 # Default to half-verbose mode
  70 ifeq ($(VERBOSE),no)
  71   Q = @
  72   HALFVERBOSEECHO = no
  73   BUILDNO_QUIET = -q
  74 else
  75 ifeq ($(VERBOSE),full)
  76   Q =
  77   HALFVERBOSEECHO = no
  78   BUILDNO_QUIET =
  79 else
  80   Q = @
  81   HALFVERBOSEECHO = yes
  82   BUILDNO_QUIET = -q
  83 endif
  84 endif
  85 ifeq ($(HOST),mingw32-linux)
  86   QUOTE = "
  87 else
  88   QUOTE =
  89 endif
  90 ifeq ($(HALFVERBOSEECHO),yes)
  91   ECHO_CP      =@echo $(QUOTE)[COPY]     $@$(QUOTE)
  92   ECHO_MKDIR   =@echo $(QUOTE)[MKDIR]    $@$(QUOTE)
  93   ECHO_BUILDNO =@echo $(QUOTE)[BUILDNO]  $@$(QUOTE)
  94   ECHO_INVOKE  =@echo $(QUOTE)[INVOKE]   $<$(QUOTE)
  95   ECHO_PCH     =@echo $(QUOTE)[PCH]      $@$(QUOTE)
  96   ECHO_CC      =@echo $(QUOTE)[CC]       $<$(QUOTE)
  97   ECHO_GAS     =@echo $(QUOTE)[GAS]      $<$(QUOTE)
  98   ECHO_NASM    =@echo $(QUOTE)[NASM]     $<$(QUOTE)
  99   ECHO_AR      =@echo $(QUOTE)[AR]       $@$(QUOTE)
 100   ECHO_WINEBLD =@echo $(QUOTE)[WINEBLD]  $@$(QUOTE)
 101   ECHO_WRC     =@echo $(QUOTE)[WRC]      $@$(QUOTE)
 102   ECHO_WIDL    =@echo $(QUOTE)[WIDL]     $@$(QUOTE)
 103   ECHO_BIN2RES =@echo $(QUOTE)[BIN2RES]  $<$(QUOTE)
 104   ECHO_DLLTOOL =@echo $(QUOTE)[DLLTOOL]  $@$(QUOTE)
 105   ECHO_LD      =@echo $(QUOTE)[LD]       $@$(QUOTE)
 106   ECHO_NM      =@echo $(QUOTE)[NM]       $@$(QUOTE)
 107   ECHO_OBJDUMP =@echo $(QUOTE)[OBJDUMP]  $@$(QUOTE)
 108   ECHO_RBUILD  =@echo $(QUOTE)[RBUILD]   $@$(QUOTE)
 109   ECHO_RSYM    =@echo $(QUOTE)[RSYM]     $@$(QUOTE)
 110   ECHO_WMC     =@echo $(QUOTE)[WMC]      $@$(QUOTE)
 111   ECHO_NCI     =@echo $(QUOTE)[NCI]      $@$(QUOTE)
 112   ECHO_CABMAN  =@echo $(QUOTE)[CABMAN]   $<$(QUOTE)
 113   ECHO_CDMAKE  =@echo $(QUOTE)[CDMAKE]   $@$(QUOTE)
 114   ECHO_MKHIVE  =@echo $(QUOTE)[MKHIVE]   $@$(QUOTE)
 115   ECHO_REGTESTS=@echo $(QUOTE)[REGTESTS] $@$(QUOTE)
 116   ECHO_TEST    =@echo $(QUOTE)[TEST]     $@$(QUOTE)
 117 else
 118   ECHO_CP      =
 119   ECHO_MKDIR   =
 120   ECHO_BUILDNO =
 121   ECHO_INVOKE  =
 122   ECHO_PCH     =
 123   ECHO_CC      =
 124   ECHO_GAS     =
 125   ECHO_NASM    =
 126   ECHO_AR      =
 127   ECHO_WINEBLD =
 128   ECHO_WRC     =
 129   ECHO_WIDL    =
 130   ECHO_BIN2RES =
 131   ECHO_DLLTOOL =
 132   ECHO_LD      =
 133   ECHO_NM      =
 134   ECHO_OBJDUMP =
 135   ECHO_RBUILD  =
 136   ECHO_RSYM    =
 137   ECHO_WMC     =
 138   ECHO_NCI     =
 139   ECHO_CABMAN  =
 140   ECHO_CDMAKE  =
 141   ECHO_MKHIVE  =
 142   ECHO_REGTESTS=
 143   ECHO_TEST    =
 144 endif
 145
 146
 147 host_gcc = $(Q)gcc
 148 host_gpp = $(Q)g++
 149 host_ld = $(Q)ld
 150 host_ar = $(Q)ar
 151 host_objcopy = $(Q)objcopy
 152 ifeq ($(HOST),mingw32-linux)
 153         EXEPREFIX = ./
 154         EXEPOSTFIX =
 155         SEP = /
 156         mkdir = -$(Q)mkdir -p
 157         gcc = $(Q)$(PREFIX)-gcc
 158         gpp = $(Q)$(PREFIX)-g++
 159         ld = $(Q)$(PREFIX)-ld
 160         nm = $(Q)$(PREFIX)-nm
 161         objdump = $(Q)$(PREFIX)-objdump
 162         ar = $(Q)$(PREFIX)-ar
 163         objcopy = $(Q)$(PREFIX)-objcopy
 164         dlltool = $(Q)$(PREFIX)-dlltool
 165         windres = $(Q)$(PREFIX)-windres
 166         rm = $(Q)rm -f
 167         cp = $(Q)cp
 168         NUL = /dev/null
 169 else # mingw32-windows
 170         EXEPREFIX =
 171         EXEPOSTFIX = .exe
 172         ROS_EMPTY =
 173         SEP = \$(ROS_EMPTY)
 174         mkdir = -$(Q)mkdir
 175         gcc = $(Q)gcc
 176         gpp = $(Q)g++
 177         ld = $(Q)ld
 178         nm = $(Q)nm
 179         objdump = $(Q)objdump
 180         ar = $(Q)ar
 181         objcopy = $(Q)objcopy
 182         dlltool = $(Q)dlltool
 183         windres = $(Q)windres
 184         rm = $(Q)del /f /q
 185         cp = $(Q)copy /y
 186         NUL = NUL
 187 endif
 188
 189 ifneq ($(ROS_INTERMEDIATE),)
 190   INTERMEDIATE := $(ROS_INTERMEDIATE)
 191 else
 192   INTERMEDIATE := obj-i386
 193 endif
 194 INTERMEDIATE_ := $(INTERMEDIATE)$(SEP)
 195
 196 ifneq ($(ROS_OUTPUT),)
 197   OUTPUT := $(ROS_OUTPUT)
 198 else
 199   OUTPUT := output-i386
 200 endif
 201 OUTPUT_ := $(OUTPUT)$(SEP)
 202
 203 ifneq ($(ROS_TEMPORARY),)
 204   TEMPORARY := $(ROS_TEMPORARY)
 205 else
 206   TEMPORARY :=
 207 endif
 208 TEMPORARY_ := $(TEMPORARY)$(SEP)
 209
 210 ifneq ($(ROS_INSTALL),)
 211   INSTALL := $(ROS_INSTALL)
 212 else
 213   INSTALL := reactos
 214 endif
 215 INSTALL_ := $(INSTALL)$(SEP)
 216
 217 $(INTERMEDIATE):
 218         ${mkdir} $@
 219
 220 ifneq ($(INTERMEDIATE),$(OUTPUT))
 221 $(OUTPUT):
 222         ${mkdir} $@
 223 endif
 224
 225
 226 NTOSKRNL_MC = ntoskrnl$(SEP)ntoskrnl.mc
 227 KERNEL32_MC = lib$(SEP)kernel32$(SEP)kernel32.mc
 228 BUILDNO_H = include$(SEP)reactos$(SEP)buildno.h
 229 BUGCODES_H = include$(SEP)reactos$(SEP)bugcodes.h
 230 BUGCODES_RC = ntoskrnl$(SEP)bugcodes.rc
 231 ERRCODES_H = include$(SEP)reactos$(SEP)errcodes.h
 232 ERRCODES_RC = lib$(SEP)kernel32$(SEP)errcodes.rc
 233
 234 include lib/lib.mak
 235 include tools/tools.mak
 236 -include makefile.auto
 237
 238 PREAUTO := \
 239         $(BIN2RES_TARGET) \
 240         $(BUILDNO_H) \
 241         $(BUGCODES_H) \
 242         $(BUGCODES_RC) \
 243         $(ERRCODES_H) \
 244         $(ERRCODES_RC) \
 245         $(NCI_SERVICE_FILES)
 246
 247 makefile.auto: $(RBUILD_TARGET) $(PREAUTO) $(XMLBUILDFILES)
 248         $(ECHO_RBUILD)
 249         $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) mingw
 250
 251
 252 $(BUGCODES_H) $(BUGCODES_RC): $(WMC_TARGET) $(NTOSKRNL_MC)
 253         $(ECHO_WMC)
 254         $(Q)$(WMC_TARGET) -i -H $(BUGCODES_H) -o $(BUGCODES_RC) $(NTOSKRNL_MC)
 255
 256 $(ERRCODES_H) $(ERRCODES_RC): $(WMC_TARGET) $(KERNEL32_MC)
 257         $(ECHO_WMC)
 258         $(Q)$(WMC_TARGET) -i -H $(ERRCODES_H) -o $(ERRCODES_RC) $(KERNEL32_MC)
 259
 260 .PHONY: makefile_auto_clean
 261 makefile_auto_clean:
 262         -@$(rm) makefile.auto $(PREAUTO) 2>$(NUL)
 263
 264 .PHONY: clean
 265 clean: makefile_auto_clean
 266
 267 .PHONY: depends
 268 depends:
 269         @-$(rm) makefile.auto
 270         @$(MAKE) $(filter-out depends, $(MAKECMDGOALS))