4 # This target builds all of ReactOS.
7 # These targets builds a single module. Replace module with the name of
8 # the module you want to build.
11 # This target builds an ISO (ReactOS.iso) from which ReactOS can be booted
15 # This target builds an ISO (ReactOS-Live.iso) from which ReactOS can be
16 # booted, but not installed.
19 # This target installs all of ReactOS to a location specified by the
20 # ROS_INSTALL environment variable.
23 # These targets installs a single module to a location specified by the
24 # ROS_INSTALL environment variable. Replace module with the name of the
25 # module you want to install.
28 # This target cleans (deletes) all files that are generated when building
32 # These targets cleans (deletes) files that are generated when building a
33 # single module. Replace module with the name of the module you want to
37 # This target does a complete dependency check of the ReactOS codebase.
38 # This can require several minutes to complete. If you only need to check
39 # dependencies for a single or few modules then you can use the
40 # module_depends targets instead. This target can also repair a damaged or
41 # missing makefile.auto if needed.
44 # These targets do a dependency check of individual modules. Replace module
45 # with the name of the module for which you want to check dependencies.
46 # This is faster than the depends target which does a complete dependency
47 # check of the ReactOS codebase.
50 # Accepted environment variables:
53 # This variable specifies the prefix of the MinGW installation. On Windows
54 # a prefix is usually not needed, but on linux it is usually "mingw32". If
55 # not present and no executable named "gcc" can be found, then the prefix is
56 # assumed to be "mingw32". If your gcc is named i386-mingw32-gcc then set
57 # ROS_PREFIX to i386-mingw32. Don't include the dash (-) before gcc.
60 # This variable controls where to put intermediate files. Intermediate
61 # files are generated files that are needed to generate the final
62 # output files. Examples of intermediate files include *.o, *.a, and
63 # *.coff. N.B. Don't put a path separator at the end. The variable
64 # defaults to .\obj-i386.
67 # This variable controls where to put output files. Output files are
68 # generated files that makes up the result of the build process.
69 # Examples of output files include *.exe, *.dll, and *.sys. N.B. Don't
70 # put a path separator at the end. The variable defaults to .\output-i386.
73 # This variable controls where to put temporary files. Temporary files
74 # are (usually small) generated files that are needed to generate the
75 # intermediate or final output files. Examples of temporary files include
76 # *.rci (preprocessed .rc files for wrc), *.tmp, and *.exp. N.B. Don't put
77 # a path separator at the end. The variable defaults to the current
81 # This variable controls where to install output files to when using
82 # 'make install'. N.B. Don't put a path separator at the end. The variable
83 # defaults to .\reactos.
86 # This variable controls if map files are to be generated for executable
87 # output files. Map files have the extension .map. The value can be either
88 # full (to build map files with assembly code), yes (to build map files
89 # without source code) or no (to not build any map files). The variable
93 # This variable controls if non-symbol-stripped versions are to be built
94 # of executable output files. Non-symbol-stripped executable output files
95 # have .nostrip added to the filename just before the extension. The value
96 # can be either yes (to build non-symbol-stripped versions of executable
97 # output files) or no (to not build non-symbol-stripped versions of
98 # executable output files). The variable defaults to no.
101 # Pass parameters to rbuild.
103 # -c Clean as you go. Delete generated files as soon as they are not needed anymore.
104 # -dd Disable automatic dependencies.
105 # -dm{module} Check only automatic dependencies for this module.
106 # -mi Let make handle creation of install directories. Rbuild will not generate the directories.
107 # -ps Generate proxy makefiles in source tree instead of the output tree.
108 # -ud Disable compilation units.
112 # Alternate name of makefile.auto
115 # check for versions of make that don't have features we need...
116 # the function "eval" is only available in 3.80+, which happens to be the minimum
117 # version that has the features we use...
118 # THIS CHECK IS BORROWED FROM THE "GMSL" PROJECT, AND IS COVERED BY THE GPL LICENSE
119 # YOU CAN FIND OUT MORE ABOUT GMSL - A VERY COOL PROJECT - AT:
120 # http://gmsl.sourceforge.net/
123 __gmsl_ignore
:= $(eval __gmsl_have_eval
:= T
)
125 ifndef __gmsl_have_eval
126 $(error ReactOS
's makefiles use GNU Make 3.80+ features, you have $(MAKE_VERSION), you MUST UPGRADE in order to build ReactOS - Sorry)
128 # END of code borrowed from GMSL ( http://gmsl.sourceforge.net/ )
133 ifeq ($(ROS_AUTOMAKE),)
134 ROS_AUTOMAKE=makefile.auto
143 ifeq ($(word 1,$(shell gcc -dumpmachine)),mingw32)
144 ifeq ($(findstring msys,$(shell sh --version 2>nul)),msys)
155 # Default to half-verbose mode
161 ifeq ($(VERBOSE),full)
167 HALFVERBOSEECHO = yes
171 ifeq ($(HOST),mingw32-linux)
176 ifeq ($(HALFVERBOSEECHO),yes)
177 ECHO_CP =@echo $(QUOTE)[COPY] $@$(QUOTE)
178 ECHO_MKDIR =@echo $(QUOTE)[MKDIR] $@$(QUOTE)
179 ECHO_BUILDNO =@echo $(QUOTE)[BUILDNO] $@$(QUOTE)
180 ECHO_INVOKE =@echo $(QUOTE)[INVOKE] $<$(QUOTE)
181 ECHO_PCH =@echo $(QUOTE)[PCH] $@$(QUOTE)
182 ECHO_CC =@echo $(QUOTE)[CC] $<$(QUOTE)
183 ECHO_GAS =@echo $(QUOTE)[GAS] $<$(QUOTE)
184 ECHO_NASM =@echo $(QUOTE)[NASM] $<$(QUOTE)
185 ECHO_AR =@echo $(QUOTE)[AR] $@$(QUOTE)
186 ECHO_WINEBLD =@echo $(QUOTE)[WINEBLD] $@$(QUOTE)
187 ECHO_WRC =@echo $(QUOTE)[WRC] $@$(QUOTE)
188 ECHO_WIDL =@echo $(QUOTE)[WIDL] $@$(QUOTE)
189 ECHO_BIN2RES =@echo $(QUOTE)[BIN2RES] $<$(QUOTE)
190 ECHO_DLLTOOL =@echo $(QUOTE)[DLLTOOL] $@$(QUOTE)
191 ECHO_LD =@echo $(QUOTE)[LD] $@$(QUOTE)
192 ECHO_NM =@echo $(QUOTE)[NM] $@$(QUOTE)
193 ECHO_OBJDUMP =@echo $(QUOTE)[OBJDUMP] $@$(QUOTE)
194 ECHO_RBUILD =@echo $(QUOTE)[RBUILD] $@$(QUOTE)
195 ECHO_RSYM =@echo $(QUOTE)[RSYM] $@$(QUOTE)
196 ECHO_WMC =@echo $(QUOTE)[WMC] $@$(QUOTE)
197 ECHO_NCI =@echo $(QUOTE)[NCI] $@$(QUOTE)
198 ECHO_CABMAN =@echo $(QUOTE)[CABMAN] $<$(QUOTE)
199 ECHO_CDMAKE =@echo $(QUOTE)[CDMAKE] $@$(QUOTE)
200 ECHO_MKHIVE =@echo $(QUOTE)[MKHIVE] $@$(QUOTE)
201 ECHO_REGTESTS=@echo $(QUOTE)[REGTESTS] $@$(QUOTE)
202 ECHO_TEST =@echo $(QUOTE)[TEST] $@$(QUOTE)
203 ECHO_GENDIB =@echo $(QUOTE)[GENDIB] $@$(QUOTE)
239 host_objcopy = $(Q)objcopy
240 ifeq ($(HOST),mingw32-linux)
241 export EXEPREFIX = ./
242 ifeq ($(OSTYPE),msys)
243 export EXEPOSTFIX = .exe
248 mkdir = -$(Q)mkdir -p
249 gcc = $(Q)$(PREFIX)-gcc
250 gpp = $(Q)$(PREFIX)-g++
251 ld = $(Q)$(PREFIX)-ld
252 nm = $(Q)$(PREFIX)-nm
253 objdump = $(Q)$(PREFIX)-objdump
254 ar = $(Q)$(PREFIX)-ar
255 objcopy = $(Q)$(PREFIX)-objcopy
256 dlltool = $(Q)$(PREFIX)-dlltool
257 windres = $(Q)$(PREFIX)-windres
261 else # mingw32-windows
262 ifeq ($(OSTYPE),msys)
264 export EXEPREFIX = ./
265 export EXEPOSTFIX = .exe
267 mkdir = -$(Q)mkdir -p
272 objdump = $(Q)objdump
274 objcopy = $(Q)objcopy
275 dlltool = $(Q)dlltool
276 windres = $(Q)windres
282 export EXEPOSTFIX = .exe
284 export SEP = \$(ROS_EMPTY)
290 objdump = $(Q)objdump
292 objcopy = $(Q)objcopy
293 dlltool = $(Q)dlltool
294 windres = $(Q)windres
301 ifneq ($(ROS_INTERMEDIATE),)
302 INTERMEDIATE := $(ROS_INTERMEDIATE)
304 INTERMEDIATE := obj-i386
306 INTERMEDIATE_ := $(INTERMEDIATE)$(SEP)
308 ifneq ($(ROS_OUTPUT),)
309 OUTPUT := $(ROS_OUTPUT)
311 OUTPUT := output-i386
313 OUTPUT_ := $(OUTPUT)$(SEP)
315 ifneq ($(ROS_TEMPORARY),)
316 TEMPORARY := $(ROS_TEMPORARY)
320 TEMPORARY_ := $(TEMPORARY)$(SEP)
322 ifneq ($(ROS_INSTALL),)
323 INSTALL := $(ROS_INSTALL)
327 INSTALL_ := $(INSTALL)$(SEP)
332 ifneq ($(INTERMEDIATE),$(OUTPUT))
338 NTOSKRNL_MC = ntoskrnl$(SEP)ntoskrnl.mc
339 KERNEL32_MC = lib$(SEP)kernel32$(SEP)kernel32.mc
340 BUILDNO_H = include$(SEP)reactos$(SEP)buildno.h
341 BUGCODES_H = include$(SEP)reactos$(SEP)bugcodes.h
342 BUGCODES_RC = ntoskrnl$(SEP)bugcodes.rc
343 ERRCODES_H = include$(SEP)reactos$(SEP)errcodes.h
344 ERRCODES_RC = lib$(SEP)kernel32$(SEP)errcodes.rc
347 include tools/tools.mak
348 include boot/freeldr/bootsect/bootsect.mak
349 -include $(ROS_AUTOMAKE)
359 $(NCI_SERVICE_FILES) \
362 $(ROS_AUTOMAKE): $(RBUILD_TARGET) $(PREAUTO) $(XMLBUILDFILES)
364 $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) mingw
367 msvc: $(RBUILD_TARGET)
369 $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) msvc
371 $(BUGCODES_H) $(BUGCODES_RC): $(WMC_TARGET) $(NTOSKRNL_MC)
373 $(Q)$(WMC_TARGET) -i -H $(BUGCODES_H) -o $(BUGCODES_RC) $(NTOSKRNL_MC)
375 $(ERRCODES_H) $(ERRCODES_RC): $(WMC_TARGET) $(KERNEL32_MC)
377 $(Q)$(WMC_TARGET) -i -U -H $(ERRCODES_H) -o $(ERRCODES_RC) $(KERNEL32_MC)
380 msvc6: $(RBUILD_TARGET)
382 $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs6.00 msvc
385 msvc7: $(RBUILD_TARGET)
387 $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs7.00 msvc
390 msvc71: $(RBUILD_TARGET)
392 $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs7.10 msvc
395 msvc8: $(RBUILD_TARGET)
397 $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs8.00 msvc
399 .PHONY: makefile_auto_clean
401 -@$(rm) $(ROS_AUTOMAKE) $(PREAUTO) 2>$(NUL)
404 clean: makefile_auto_clean
408 @-$(rm) makefile.auto
409 @$(MAKE) $(filter-out depends, $(MAKECMDGOALS))