reactos/Makefile

   1 # Accepted environment variables:
   2 #
   3 #    ROS_PREFIX
   4 #        This variable specifies the prefix of the MinGW installation. On Windows
   5 #        a prefix is usually not needed, but on linux it is usually "mingw32". If
   6 #        not present and no executable named "gcc" can be found, then the prefix is
   7 #        assumed to be "mingw32". If your gcc is named i386-mingw32-gcc then set
   8 #        ROS_PREFIX to i386-mingw32. Don't include the dash (-) before gcc.
   9 #
  10 #    ROS_INTERMEDIATE
  11 #        This variable controls where to put intermediate files. Intermediate
  12 #        files are generated files that are needed to generate the final
  13 #        output files. Examples of intermediate files include *.o, *.a, and
  14 #        *.coff. N.B. Don't put a path separator at the end. The variable
  15 #        defaults to .\obj-i386.
  16 #
  17 #    ROS_OUTPUT
  18 #        This variable controls where to put output files. Output files are
  19 #        generated files that makes up the result of the build process.
  20 #        Examples of output files include *.exe, *.dll, and *.sys. N.B. Don't
  21 #        put a path separator at the end. The variable defaults to .\output-i386.
  22 #
  23 #    ROS_TEMPORARY
  24 #        This variable controls where to put temporary files. Temporary files
  25 #        are (usually small) generated files that are needed to generate the
  26 #        intermediate or final output files. Examples of temporary files include
  27 #        *.rci (preprocessed .rc files for wrc), *.tmp, and *.exp. N.B. Don't put
  28 #        a path separator at the end. The variable defaults to the current
  29 #        directory.
  30 #
  31 #    ROS_INSTALL
  32 #        This variable controls where to install output files to when using
  33 #        'make install'. N.B. Don't put a path separator at the end. The variable
  34 #        defaults to .\reactos.
  35 #
  36 #    ROS_BUILDMAP
  37 #        This variable controls if map files are to be generated for executable
  38 #        output files. Map files have the extension .map. The value can be either
  39 #        full (to build map files with assembly code), yes (to build map files
  40 #        without source code) or no (to not build any map files). The variable
  41 #        defaults to no.
  42 #
  43 #    ROS_BUILDNOSTRIP
  44 #        This variable controls if non-symbol-stripped versions are to be built
  45 #        of executable output files. Non-symbol-stripped executable output files
  46 #        have .nostrip added to the filename just before the extension. The value
  47 #        can be either yes (to build non-symbol-stripped versions of executable
  48 #        output files) or no (to not build non-symbol-stripped versions of
  49 #        executable output files). The variable defaults to no.
  50 #
  51 #    ROS_RBUILDFLAGS
  52 #        Pass parameters to rbuild.
  53 #            -v           Be verbose.
  54 #            -c           Clean as you go. Delete generated files as soon as they are not needed anymore.
  55 #            -dd          Disable automatic dependencies.
  56 #            -dm{module}  Check only automatic dependencies for this module.
  57 #            -mi          Let make handle creation of install directories. Rbuild will not generate the directories.
  58 #            -ps          Generate proxy makefiles in source tree instead of the output tree.
  59
  60 .PHONY: all
  61 .PHONY: clean
  62 all: makefile.auto
  63
  64
  65 .SUFFIXES:
  66
  67 ifeq ($(HOST),)
  68 ifeq ($(word 1,$(shell gcc -dumpmachine)),mingw32)
  69 HOST=mingw32-windows
  70 else
  71 HOST=mingw32-linux
  72 endif
  73 endif
  74
  75 # Default to half-verbose mode
  76 ifeq ($(VERBOSE),no)
  77   Q = @
  78   HALFVERBOSEECHO = no
  79   BUILDNO_QUIET = -q
  80 else
  81 ifeq ($(VERBOSE),full)
  82   Q =
  83   HALFVERBOSEECHO = no
  84   BUILDNO_QUIET =
  85 else
  86   Q = @
  87   HALFVERBOSEECHO = yes
  88   BUILDNO_QUIET = -q
  89 endif
  90 endif
  91 ifeq ($(HOST),mingw32-linux)
  92   QUOTE = "
  93 else
  94   QUOTE =
  95 endif
  96 ifeq ($(HALFVERBOSEECHO),yes)
  97   ECHO_CP      =@echo $(QUOTE)[COPY]     $@$(QUOTE)
  98   ECHO_MKDIR   =@echo $(QUOTE)[MKDIR]    $@$(QUOTE)
  99   ECHO_BUILDNO =@echo $(QUOTE)[BUILDNO]  $@$(QUOTE)
 100   ECHO_INVOKE  =@echo $(QUOTE)[INVOKE]   $<$(QUOTE)
 101   ECHO_PCH     =@echo $(QUOTE)[PCH]      $@$(QUOTE)
 102   ECHO_CC      =@echo $(QUOTE)[CC]       $<$(QUOTE)
 103   ECHO_GAS     =@echo $(QUOTE)[GAS]      $<$(QUOTE)
 104   ECHO_NASM    =@echo $(QUOTE)[NASM]     $<$(QUOTE)
 105   ECHO_AR      =@echo $(QUOTE)[AR]       $@$(QUOTE)
 106   ECHO_WINEBLD =@echo $(QUOTE)[WINEBLD]  $@$(QUOTE)
 107   ECHO_WRC     =@echo $(QUOTE)[WRC]      $@$(QUOTE)
 108   ECHO_WIDL    =@echo $(QUOTE)[WIDL]     $@$(QUOTE)
 109   ECHO_BIN2RES =@echo $(QUOTE)[BIN2RES]  $<$(QUOTE)
 110   ECHO_DLLTOOL =@echo $(QUOTE)[DLLTOOL]  $@$(QUOTE)
 111   ECHO_LD      =@echo $(QUOTE)[LD]       $@$(QUOTE)
 112   ECHO_NM      =@echo $(QUOTE)[NM]       $@$(QUOTE)
 113   ECHO_OBJDUMP =@echo $(QUOTE)[OBJDUMP]  $@$(QUOTE)
 114   ECHO_RBUILD  =@echo $(QUOTE)[RBUILD]   $@$(QUOTE)
 115   ECHO_RSYM    =@echo $(QUOTE)[RSYM]     $@$(QUOTE)
 116   ECHO_WMC     =@echo $(QUOTE)[WMC]      $@$(QUOTE)
 117   ECHO_NCI     =@echo $(QUOTE)[NCI]      $@$(QUOTE)
 118   ECHO_CABMAN  =@echo $(QUOTE)[CABMAN]   $<$(QUOTE)
 119   ECHO_CDMAKE  =@echo $(QUOTE)[CDMAKE]   $@$(QUOTE)
 120   ECHO_MKHIVE  =@echo $(QUOTE)[MKHIVE]   $@$(QUOTE)
 121   ECHO_REGTESTS=@echo $(QUOTE)[REGTESTS] $@$(QUOTE)
 122   ECHO_TEST    =@echo $(QUOTE)[TEST]     $@$(QUOTE)
 123 else
 124   ECHO_CP      =
 125   ECHO_MKDIR   =
 126   ECHO_BUILDNO =
 127   ECHO_INVOKE  =
 128   ECHO_PCH     =
 129   ECHO_CC      =
 130   ECHO_GAS     =
 131   ECHO_NASM    =
 132   ECHO_AR      =
 133   ECHO_WINEBLD =
 134   ECHO_WRC     =
 135   ECHO_WIDL    =
 136   ECHO_BIN2RES =
 137   ECHO_DLLTOOL =
 138   ECHO_LD      =
 139   ECHO_NM      =
 140   ECHO_OBJDUMP =
 141   ECHO_RBUILD  =
 142   ECHO_RSYM    =
 143   ECHO_WMC     =
 144   ECHO_NCI     =
 145   ECHO_CABMAN  =
 146   ECHO_CDMAKE  =
 147   ECHO_MKHIVE  =
 148   ECHO_REGTESTS=
 149   ECHO_TEST    =
 150 endif
 151
 152
 153 host_gcc = $(Q)gcc
 154 host_gpp = $(Q)g++
 155 host_ld = $(Q)ld
 156 host_ar = $(Q)ar
 157 host_objcopy = $(Q)objcopy
 158 ifeq ($(HOST),mingw32-linux)
 159         EXEPREFIX = ./
 160         EXEPOSTFIX =
 161         SEP = /
 162         mkdir = -$(Q)mkdir -p
 163         gcc = $(Q)$(PREFIX)-gcc
 164         gpp = $(Q)$(PREFIX)-g++
 165         ld = $(Q)$(PREFIX)-ld
 166         nm = $(Q)$(PREFIX)-nm
 167         objdump = $(Q)$(PREFIX)-objdump
 168         ar = $(Q)$(PREFIX)-ar
 169         objcopy = $(Q)$(PREFIX)-objcopy
 170         dlltool = $(Q)$(PREFIX)-dlltool
 171         windres = $(Q)$(PREFIX)-windres
 172         rm = $(Q)rm -f
 173         cp = $(Q)cp
 174         NUL = /dev/null
 175 else # mingw32-windows
 176         EXEPREFIX =
 177         EXEPOSTFIX = .exe
 178         ROS_EMPTY =
 179         SEP = \$(ROS_EMPTY)
 180         mkdir = -$(Q)mkdir
 181         gcc = $(Q)gcc
 182         gpp = $(Q)g++
 183         ld = $(Q)ld
 184         nm = $(Q)nm
 185         objdump = $(Q)objdump
 186         ar = $(Q)ar
 187         objcopy = $(Q)objcopy
 188         dlltool = $(Q)dlltool
 189         windres = $(Q)windres
 190         rm = $(Q)del /f /q
 191         cp = $(Q)copy /y
 192         NUL = NUL
 193 endif
 194
 195 ifneq ($(ROS_INTERMEDIATE),)
 196   INTERMEDIATE := $(ROS_INTERMEDIATE)
 197 else
 198   INTERMEDIATE := obj-i386
 199 endif
 200 INTERMEDIATE_ := $(INTERMEDIATE)$(SEP)
 201
 202 ifneq ($(ROS_OUTPUT),)
 203   OUTPUT := $(ROS_OUTPUT)
 204 else
 205   OUTPUT := output-i386
 206 endif
 207 OUTPUT_ := $(OUTPUT)$(SEP)
 208
 209 ifneq ($(ROS_TEMPORARY),)
 210   TEMPORARY := $(ROS_TEMPORARY)
 211 else
 212   TEMPORARY :=
 213 endif
 214 TEMPORARY_ := $(TEMPORARY)$(SEP)
 215
 216 ifneq ($(ROS_INSTALL),)
 217   INSTALL := $(ROS_INSTALL)
 218 else
 219   INSTALL := reactos
 220 endif
 221 INSTALL_ := $(INSTALL)$(SEP)
 222
 223 $(INTERMEDIATE):
 224         ${mkdir} $@
 225
 226 ifneq ($(INTERMEDIATE),$(OUTPUT))
 227 $(OUTPUT):
 228         ${mkdir} $@
 229 endif
 230
 231
 232 NTOSKRNL_MC = ntoskrnl$(SEP)ntoskrnl.mc
 233 KERNEL32_MC = lib$(SEP)kernel32$(SEP)kernel32.mc
 234 BUILDNO_H = include$(SEP)reactos$(SEP)buildno.h
 235 BUGCODES_H = include$(SEP)reactos$(SEP)bugcodes.h
 236 BUGCODES_RC = ntoskrnl$(SEP)bugcodes.rc
 237 ERRCODES_H = include$(SEP)reactos$(SEP)errcodes.h
 238 ERRCODES_RC = lib$(SEP)kernel32$(SEP)errcodes.rc
 239
 240 include lib/lib.mak
 241 include tools/tools.mak
 242 -include makefile.auto
 243
 244 PREAUTO := \
 245         $(BIN2RES_TARGET) \
 246         $(BUILDNO_H) \
 247         $(BUGCODES_H) \
 248         $(BUGCODES_RC) \
 249         $(ERRCODES_H) \
 250         $(ERRCODES_RC) \
 251         $(NCI_SERVICE_FILES)
 252
 253 makefile.auto: $(RBUILD_TARGET) $(PREAUTO) $(XMLBUILDFILES)
 254         $(ECHO_RBUILD)
 255         $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) mingw
 256
 257
 258 $(BUGCODES_H) $(BUGCODES_RC): $(WMC_TARGET) $(NTOSKRNL_MC)
 259         $(ECHO_WMC)
 260         $(Q)$(WMC_TARGET) -i -H $(BUGCODES_H) -o $(BUGCODES_RC) $(NTOSKRNL_MC)
 261
 262 $(ERRCODES_H) $(ERRCODES_RC): $(WMC_TARGET) $(KERNEL32_MC)
 263         $(ECHO_WMC)
 264         $(Q)$(WMC_TARGET) -i -H $(ERRCODES_H) -o $(ERRCODES_RC) $(KERNEL32_MC)
 265
 266 .PHONY: makefile_auto_clean
 267 makefile_auto_clean:
 268         -@$(rm) makefile.auto $(PREAUTO) 2>$(NUL)
 269
 270 .PHONY: clean
 271 clean: makefile_auto_clean
 272
 273 .PHONY: depends
 274 depends:
 275         @-$(rm) makefile.auto
 276         @$(MAKE) $(filter-out depends, $(MAKECMDGOALS))