2 Syntax for configuring RDP redirection modules
3 ==============================================
8 All redirection is configured using the -r option. The general syntax
13 <module> is the name of the redirection module. The following names
14 are valid: disk, printer, lptport, comport, clipboard, sound.
16 <string> is interpreted by each redirection module.
18 The redirection modules are described below.
23 Multiple mappings possible: yes
24 Default: no disk redirected
25 Syntax: -r disk:<sharename>=<path>
26 Example: -r disk:home=/home/johndoe
31 Multiple mappings possible: yes
32 Default: no printers redirected
33 Syntax: -r printer:<printername>
34 Example: -r printer:mydeskjet
40 Multiple mappings possible: yes
41 Default: no LPT ports redirected
42 Syntax: -r lptport:<lptport>=<device>
43 Example: -r lptport:LPT1=/dev/lp0
48 Multiple mappings possible: yes
49 Default: no COM ports redirected
50 Syntax: -r comport:<comport>=<device>
51 Example: -r comport:COM1=/dev/ttyS0
56 Multiple mappings possible: no
58 Syntax: -r clipboard:[yes|no]
59 Example: -r clipboard:no
64 Multiple mappings possible: no
66 Syntax: -r sound:[local|off|remote]
68 "local" means "Bring to this computer"
69 "off" means "Do not play"
70 "remote" means "Leave at remote computer"
72 Example: -r sound:remote