ac564c63e7e45a78cdc6e1c192f989ed02a3f1e8
[reactos.git] / reactos / drivers / usb / usbport / hcd.h
1 /*
2 * Copyright (c) 2001-2002 by David Brownell
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
12 * for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17 */
18
19
20 #ifdef __KERNEL__
21
22 /* This file contains declarations of usbcore internals that are mostly
23 * used or exposed by Host Controller Drivers.
24 */
25
26 /*
27 * USB Packet IDs (PIDs)
28 */
29 #define USB_PID_UNDEF_0 0xf0
30 #define USB_PID_OUT 0xe1
31 #define USB_PID_ACK 0xd2
32 #define USB_PID_DATA0 0xc3
33 #define USB_PID_PING 0xb4 /* USB 2.0 */
34 #define USB_PID_SOF 0xa5
35 #define USB_PID_NYET 0x96 /* USB 2.0 */
36 #define USB_PID_DATA2 0x87 /* USB 2.0 */
37 #define USB_PID_SPLIT 0x78 /* USB 2.0 */
38 #define USB_PID_IN 0x69
39 #define USB_PID_NAK 0x5a
40 #define USB_PID_DATA1 0x4b
41 #define USB_PID_PREAMBLE 0x3c /* Token mode */
42 #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
43 #define USB_PID_SETUP 0x2d
44 #define USB_PID_STALL 0x1e
45 #define USB_PID_MDATA 0x0f /* USB 2.0 */
46
47 /*-------------------------------------------------------------------------*/
48
49 /*
50 * USB Host Controller Driver (usb_hcd) framework
51 *
52 * Since "struct usb_bus" is so thin, you can't share much code in it.
53 * This framework is a layer over that, and should be more sharable.
54 */
55
56 /*-------------------------------------------------------------------------*/
57
58 struct usb_hcd { /* usb_bus.hcpriv points to this */
59
60 /*
61 * housekeeping
62 */
63 struct usb_bus self; /* hcd is-a bus */
64
65 const char *product_desc; /* product/vendor string */
66 const char *description; /* "ehci-hcd" etc */
67
68 struct timer_list rh_timer; /* drives root hub */
69 struct list_head dev_list; /* devices on this bus */
70 struct work_struct work;
71
72 /*
73 * hardware info/state
74 */
75 struct hc_driver *driver; /* hw-specific hooks */
76 int irq; /* irq allocated */
77 void *regs; /* device memory/io */
78 struct device *controller; /* handle to hardware */
79
80 /* a few non-PCI controllers exist, mostly for OHCI */
81 struct pci_dev *pdev; /* pci is typical */
82 #ifdef CONFIG_PCI
83 int region; /* pci region for regs */
84 u32 pci_state [16]; /* for PM state save */
85 atomic_t resume_count; /* multiple resumes issue */
86 #endif
87
88 #define HCD_BUFFER_POOLS 4
89 struct pci_pool *pool [HCD_BUFFER_POOLS];
90
91 int state;
92 # define __ACTIVE 0x01
93 # define __SLEEPY 0x02
94 # define __SUSPEND 0x04
95 # define __TRANSIENT 0x80
96
97 # define USB_STATE_HALT 0
98 # define USB_STATE_RUNNING (__ACTIVE)
99 # define USB_STATE_READY (__ACTIVE|__SLEEPY)
100 # define USB_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
101 # define USB_STATE_RESUMING (__SUSPEND|__TRANSIENT)
102 # define USB_STATE_SUSPENDED (__SUSPEND)
103
104 #define HCD_IS_RUNNING(state) ((state) & __ACTIVE)
105 #define HCD_IS_SUSPENDED(state) ((state) & __SUSPEND)
106
107 /* more shared queuing code would be good; it should support
108 * smarter scheduling, handle transaction translators, etc;
109 * input size of periodic table to an interrupt scheduler.
110 * (ohci 32, uhci 1024, ehci 256/512/1024).
111 */
112 };
113
114 /* 2.4 does this a bit differently ... */
115 static inline struct usb_bus *hcd_to_bus (struct usb_hcd *hcd)
116 {
117 return &hcd->self;
118 }
119
120
121 struct hcd_dev { /* usb_device.hcpriv points to this */
122 struct list_head dev_list; /* on this hcd */
123 struct list_head urb_list; /* pending on this dev */
124
125 /* per-configuration HC/HCD state, such as QH or ED */
126 void *ep[32];
127 };
128
129 // urb.hcpriv is really hardware-specific
130
131 struct hcd_timeout { /* timeouts we allocate */
132 struct list_head timeout_list;
133 struct timer_list timer;
134 };
135
136 /*-------------------------------------------------------------------------*/
137
138 /*
139 * FIXME usb_operations should vanish or become hc_driver,
140 * when usb_bus and usb_hcd become the same thing.
141 */
142
143 struct usb_operations {
144 int (*allocate)(struct usb_device *);
145 int (*deallocate)(struct usb_device *);
146 int (*get_frame_number) (struct usb_device *usb_dev);
147 int (*submit_urb) (struct urb *urb, int mem_flags);
148 int (*unlink_urb) (struct urb *urb);
149
150 /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */
151 void *(*buffer_alloc)(struct usb_bus *bus, size_t size,
152 int mem_flags,
153 dma_addr_t *dma);
154 void (*buffer_free)(struct usb_bus *bus, size_t size,
155 void *addr, dma_addr_t dma);
156
157 void (*disable)(struct usb_device *udev, int bEndpointAddress);
158 };
159
160 /* each driver provides one of these, and hardware init support */
161
162 struct pt_regs;
163
164 // new struct from 2.6
165 struct hc_driver {
166 const char *description; /* "ehci-hcd" etc */
167
168 /* irq handler */
169 irqreturn_t (*irq) (struct usb_hcd *hcd, struct pt_regs *regs);
170
171 int flags;
172 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
173 #define HCD_USB11 0x0010 /* USB 1.1 */
174 #define HCD_USB2 0x0020 /* USB 2.0 */
175
176 /* called to init HCD and root hub */
177 int (*reset) (struct usb_hcd *hcd);
178 int (*start) (struct usb_hcd *hcd);
179
180 /* called after all devices were suspended */
181 int (*suspend) (struct usb_hcd *hcd, u32 state);
182
183 /* called before any devices get resumed */
184 int (*resume) (struct usb_hcd *hcd);
185
186 /* cleanly make HCD stop writing memory and doing I/O */
187 void (*stop) (struct usb_hcd *hcd);
188
189 /* return current frame number */
190 int (*get_frame_number) (struct usb_hcd *hcd);
191
192 /* memory lifecycle */
193 struct usb_hcd *(*hcd_alloc) (void);
194 void (*hcd_free) (struct usb_hcd *hcd);
195
196 /* manage i/o requests, device state */
197 int (*urb_enqueue) (struct usb_hcd *hcd, struct urb *urb,
198 int mem_flags);
199 int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);
200
201 /* hw synch, freeing endpoint resources that urb_dequeue can't */
202 void (*endpoint_disable)(struct usb_hcd *hcd,
203 struct hcd_dev *dev, int bEndpointAddress);
204
205 /* root hub support */
206 int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
207 int (*hub_control) (struct usb_hcd *hcd,
208 u16 typeReq, u16 wValue, u16 wIndex,
209 u8 *buf, u16 wLength);
210 };
211
212 // old version, "just in case"
213 #if 0
214 struct hc_driver {
215 const char *description; /* "ehci-hcd" etc */
216
217 /* irq handler */
218 int (*irq) (struct usb_hcd *hcd, struct pt_regs *regs);
219
220 int flags;
221 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
222 #define HCD_USB11 0x0010 /* USB 1.1 */
223 #define HCD_USB2 0x0020 /* USB 2.0 */
224
225 /* called to init HCD and root hub */
226 int (*start) (struct usb_hcd *hcd);
227
228 /* called after all devices were suspended */
229 int (*suspend) (struct usb_hcd *hcd, u32 state);
230
231 /* called before any devices get resumed */
232 int (*resume) (struct usb_hcd *hcd);
233
234 /* cleanly make HCD stop writing memory and doing I/O */
235 void (*stop) (struct usb_hcd *hcd);
236
237 /* return current frame number */
238 int (*get_frame_number) (struct usb_hcd *hcd);
239
240 /* memory lifecycle */
241 struct usb_hcd *(*hcd_alloc) (void);
242 void (*hcd_free) (struct usb_hcd *hcd);
243
244 /* manage i/o requests, device state */
245 int (*urb_enqueue) (struct usb_hcd *hcd, struct urb *urb,
246 int mem_flags);
247 int (*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);
248
249 /* hw synch, freeing endpoint resources that urb_dequeue can't */
250 void (*endpoint_disable)(struct usb_hcd *hcd,
251 struct hcd_dev *dev, int bEndpointAddress);
252
253 /* root hub support */
254 int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
255 int (*hub_control) (struct usb_hcd *hcd,
256 u16 typeReq, u16 wValue, u16 wIndex,
257 char *buf, u16 wLength);
258 };
259 #endif
260
261 extern void STDCALL usb_hcd_giveback_urb (struct usb_hcd *hcd, struct urb *urb, struct pt_regs *regs);
262 extern void STDCALL usb_bus_init (struct usb_bus *bus);
263 extern void usb_rh_status_dequeue (struct usb_hcd *hcd, struct urb *urb);
264
265 #ifdef CONFIG_PCI
266 struct pci_dev;
267 struct pci_device_id;
268 extern int STDCALL usb_hcd_pci_probe (struct pci_dev *dev,
269 const struct pci_device_id *id);
270 extern void STDCALL usb_hcd_pci_remove (struct pci_dev *dev);
271
272 #ifdef CONFIG_PM
273 // FIXME: see Documentation/power/pci.txt (2.4.6 and later?)
274 // extern int usb_hcd_pci_save_state (struct pci_dev *dev, u32 state);
275 extern int usb_hcd_pci_suspend (struct pci_dev *dev, u32 state);
276 extern int usb_hcd_pci_resume (struct pci_dev *dev);
277 // extern int usb_hcd_pci_enable_wake (struct pci_dev *dev, u32 state, int flg);
278 #endif /* CONFIG_PM */
279
280 #endif /* CONFIG_PCI */
281
282 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
283 int hcd_buffer_create (struct usb_hcd *hcd);
284 void hcd_buffer_destroy (struct usb_hcd *hcd);
285
286 void *hcd_buffer_alloc (struct usb_bus *bus, size_t size,
287 int mem_flags, dma_addr_t *dma);
288 void hcd_buffer_free (struct usb_bus *bus, size_t size,
289 void *addr, dma_addr_t dma);
290
291 /* generic bus glue, needed for host controllers that don't use PCI */
292 extern struct usb_operations usb_hcd_operations;
293 extern irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs *r);
294 extern void STDCALL usb_hc_died (struct usb_hcd *hcd);
295
296 /* -------------------------------------------------------------------------- */
297
298 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
299 extern int usb_new_device(struct usb_device *dev, struct device *parent);
300 extern void STDCALL usb_connect(struct usb_device *dev);
301 extern void usb_disconnect(struct usb_device **);
302
303 /* exported to hub driver ONLY to support usb_reset_device () */
304 extern int usb_get_configuration(struct usb_device *dev);
305 extern void usb_set_maxpacket(struct usb_device *dev);
306 extern void usb_destroy_configuration(struct usb_device *dev);
307 extern int usb_set_address(struct usb_device *dev);
308
309 /* use these only before the device's address has been set */
310 #define usb_snddefctrl(dev) ((PIPE_CONTROL << 30))
311 #define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | USB_DIR_IN)
312
313 /*-------------------------------------------------------------------------*/
314
315 /*
316 * HCD Root Hub support
317 */
318
319 #include "hub.h"
320
321 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
322 #define DeviceRequest \
323 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
324 #define DeviceOutRequest \
325 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
326
327 #define InterfaceRequest \
328 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
329
330 #define EndpointRequest \
331 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
332 #define EndpointOutRequest \
333 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
334
335 /* table 9.6 standard features */
336 #define DEVICE_REMOTE_WAKEUP 1
337 #define ENDPOINT_HALT 0
338
339 /* class requests from the USB 2.0 hub spec, table 11-15 */
340 /* GetBusState and SetHubDescriptor are optional, omitted */
341 #define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
342 #define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
343 #define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
344 #define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
345 #define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
346 #define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
347 #define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
348
349
350 /*-------------------------------------------------------------------------*/
351
352 /*
353 * Generic bandwidth allocation constants/support
354 */
355 #define FRAME_TIME_USECS 1000L
356 #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
357 /* Trying not to use worst-case bit-stuffing
358 of (7/6 * 8 * bytecount) = 9.33 * bytecount */
359 /* bytecount = data payload byte count */
360
361 #define NS_TO_US(ns) ((ns + 500L) / 1000L)
362 /* convert & round nanoseconds to microseconds */
363
364 extern void STDCALL usb_claim_bandwidth (struct usb_device *dev, struct urb *urb,
365 int bustime, int isoc);
366 extern void STDCALL usb_release_bandwidth (struct usb_device *dev, struct urb *urb,
367 int isoc);
368
369 /*
370 * Full/low speed bandwidth allocation constants/support.
371 */
372 #define BW_HOST_DELAY 1000L /* nanoseconds */
373 #define BW_HUB_LS_SETUP 333L /* nanoseconds */
374 /* 4 full-speed bit times (est.) */
375
376 #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
377 #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
378 #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
379
380 extern int STDCALL usb_check_bandwidth (struct usb_device *dev, struct urb *urb);
381
382 /*
383 * Ceiling microseconds (typical) for that many bytes at high speed
384 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
385 * to preallocate bandwidth)
386 */
387 #define USB2_HOST_DELAY 5 /* nsec, guess */
388 #define HS_USECS(bytes) NS_TO_US ( ((55 * 8 * 2083)/1000) \
389 + ((2083UL * (3167 + BitTime (bytes)))/1000) \
390 + USB2_HOST_DELAY)
391 #define HS_USECS_ISO(bytes) NS_TO_US ( ((long)(38 * 8 * 2.083)) \
392 + ((2083UL * (3167 + BitTime (bytes)))/1000) \
393 + USB2_HOST_DELAY)
394
395 extern long STDCALL usb_calc_bus_time (int speed, int is_input,
396 int isoc, int bytecount);
397
398 /*-------------------------------------------------------------------------*/
399
400 extern struct usb_bus STDCALL *usb_alloc_bus (struct usb_operations *);
401 extern void STDCALL usb_free_bus (struct usb_bus *);
402
403 extern void STDCALL usb_register_bus (struct usb_bus *);
404 extern void STDCALL usb_deregister_bus (struct usb_bus *);
405
406 extern int STDCALL usb_register_root_hub (struct usb_device *usb_dev,
407 struct device *parent_dev);
408
409 /* for portability to 2.4, hcds should call this */
410 static inline int hcd_register_root (struct usb_hcd *hcd)
411 {
412 return usb_register_root_hub (
413 hcd_to_bus (hcd)->root_hub, hcd->controller);
414 }
415
416 /*-------------------------------------------------------------------------*/
417
418 /* exported only within usbcore */
419
420 extern struct list_head usb_bus_list;
421 extern struct semaphore usb_bus_list_lock;
422
423 extern void usb_bus_get (struct usb_bus *bus);
424 extern void usb_bus_put (struct usb_bus *bus);
425
426 extern int usb_find_interface_driver (struct usb_device *dev,
427 struct usb_interface *interface);
428
429 #define usb_endpoint_halt(dev, ep, out) ((dev)->halted[out] |= (1 << (ep)))
430
431 #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
432
433 /*
434 * USB device fs stuff
435 */
436
437 #ifdef CONFIG_USB_DEVICEFS
438
439 /*
440 * these are expected to be called from the USB core/hub thread
441 * with the kernel lock held
442 */
443 extern void usbfs_add_bus(struct usb_bus *bus);
444 extern void usbfs_remove_bus(struct usb_bus *bus);
445 extern void usbfs_add_device(struct usb_device *dev);
446 extern void usbfs_remove_device(struct usb_device *dev);
447 extern void usbfs_update_special (void);
448
449 extern int usbfs_init(void);
450 extern void usbfs_cleanup(void);
451
452 #else /* CONFIG_USB_DEVICEFS */
453
454 static inline void usbfs_add_bus(struct usb_bus *bus) {}
455 static inline void usbfs_remove_bus(struct usb_bus *bus) {}
456 static inline void usbfs_add_device(struct usb_device *dev)
457 {
458 if (dev->parent)
459 {
460 PDEVICE_OBJECT Pdo = (PDEVICE_OBJECT)dev->parent->dev.dev_ext;
461 IoInvalidateDeviceRelations(Pdo, BusRelations);
462 }
463 }
464 static inline void usbfs_remove_device(struct usb_device *dev) {}
465 static inline void usbfs_update_special (void) {}
466
467 static inline int usbfs_init(void) { return 0; }
468 static inline void usbfs_cleanup(void) { }
469
470 #endif /* CONFIG_USB_DEVICEFS */
471
472 /*-------------------------------------------------------------------------*/
473
474 /* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
475 // bleech -- resurfaced in 2.4.11 or 2.4.12
476 #define bitmap DeviceRemovable
477
478
479 /*-------------------------------------------------------------------------*/
480
481 /* random stuff */
482
483 #define RUN_CONTEXT (in_irq () ? "in_irq" \
484 : (in_interrupt () ? "in_interrupt" : "can sleep"))
485
486
487 #endif /* __KERNEL__ */
488