2 * Copyright (c) 2001-2002 by David Brownell
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 /* This file contains declarations of usbcore internals that are mostly
23 * used or exposed by Host Controller Drivers.
27 * USB Packet IDs (PIDs)
29 #define USB_PID_UNDEF_0 0xf0
30 #define USB_PID_OUT 0xe1
31 #define USB_PID_ACK 0xd2
32 #define USB_PID_DATA0 0xc3
33 #define USB_PID_PING 0xb4 /* USB 2.0 */
34 #define USB_PID_SOF 0xa5
35 #define USB_PID_NYET 0x96 /* USB 2.0 */
36 #define USB_PID_DATA2 0x87 /* USB 2.0 */
37 #define USB_PID_SPLIT 0x78 /* USB 2.0 */
38 #define USB_PID_IN 0x69
39 #define USB_PID_NAK 0x5a
40 #define USB_PID_DATA1 0x4b
41 #define USB_PID_PREAMBLE 0x3c /* Token mode */
42 #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
43 #define USB_PID_SETUP 0x2d
44 #define USB_PID_STALL 0x1e
45 #define USB_PID_MDATA 0x0f /* USB 2.0 */
47 /*-------------------------------------------------------------------------*/
50 * USB Host Controller Driver (usb_hcd) framework
52 * Since "struct usb_bus" is so thin, you can't share much code in it.
53 * This framework is a layer over that, and should be more sharable.
56 /*-------------------------------------------------------------------------*/
58 struct usb_hcd
{ /* usb_bus.hcpriv points to this */
63 struct usb_bus self
; /* hcd is-a bus */
65 const char *product_desc
; /* product/vendor string */
66 const char *description
; /* "ehci-hcd" etc */
68 struct timer_list rh_timer
; /* drives root hub */
69 struct list_head dev_list
; /* devices on this bus */
70 struct work_struct work
;
75 struct hc_driver
*driver
; /* hw-specific hooks */
76 int irq
; /* irq allocated */
77 void *regs
; /* device memory/io */
78 struct device
*controller
; /* handle to hardware */
80 /* a few non-PCI controllers exist, mostly for OHCI */
81 struct pci_dev
*pdev
; /* pci is typical */
83 int region
; /* pci region for regs */
84 u32 pci_state
[16]; /* for PM state save */
85 atomic_t resume_count
; /* multiple resumes issue */
88 #define HCD_BUFFER_POOLS 4
89 struct pci_pool
*pool
[HCD_BUFFER_POOLS
];
92 # define __ACTIVE 0x01
93 # define __SLEEPY 0x02
94 # define __SUSPEND 0x04
95 # define __TRANSIENT 0x80
97 # define USB_STATE_HALT 0
98 # define USB_STATE_RUNNING (__ACTIVE)
99 # define USB_STATE_READY (__ACTIVE|__SLEEPY)
100 # define USB_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
101 # define USB_STATE_RESUMING (__SUSPEND|__TRANSIENT)
102 # define USB_STATE_SUSPENDED (__SUSPEND)
104 #define HCD_IS_RUNNING(state) ((state) & __ACTIVE)
105 #define HCD_IS_SUSPENDED(state) ((state) & __SUSPEND)
107 /* more shared queuing code would be good; it should support
108 * smarter scheduling, handle transaction translators, etc;
109 * input size of periodic table to an interrupt scheduler.
110 * (ohci 32, uhci 1024, ehci 256/512/1024).
114 /* 2.4 does this a bit differently ... */
115 static inline struct usb_bus
*hcd_to_bus (struct usb_hcd
*hcd
)
121 struct hcd_dev
{ /* usb_device.hcpriv points to this */
122 struct list_head dev_list
; /* on this hcd */
123 struct list_head urb_list
; /* pending on this dev */
125 /* per-configuration HC/HCD state, such as QH or ED */
129 // urb.hcpriv is really hardware-specific
131 struct hcd_timeout
{ /* timeouts we allocate */
132 struct list_head timeout_list
;
133 struct timer_list timer
;
136 /*-------------------------------------------------------------------------*/
139 * FIXME usb_operations should vanish or become hc_driver,
140 * when usb_bus and usb_hcd become the same thing.
143 struct usb_operations
{
144 int (*allocate
)(struct usb_device
*);
145 int (*deallocate
)(struct usb_device
*);
146 int (*get_frame_number
) (struct usb_device
*usb_dev
);
147 int (*submit_urb
) (struct urb
*urb
, int mem_flags
);
148 int (*unlink_urb
) (struct urb
*urb
);
150 /* allocate dma-consistent buffer for URB_DMA_NOMAPPING */
151 void *(*buffer_alloc
)(struct usb_bus
*bus
, size_t size
,
154 void (*buffer_free
)(struct usb_bus
*bus
, size_t size
,
155 void *addr
, dma_addr_t dma
);
157 void (*disable
)(struct usb_device
*udev
, int bEndpointAddress
);
160 /* each driver provides one of these, and hardware init support */
164 // new struct from 2.6
166 const char *description
; /* "ehci-hcd" etc */
169 irqreturn_t (*irq
) (struct usb_hcd
*hcd
, struct pt_regs
*regs
);
172 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
173 #define HCD_USB11 0x0010 /* USB 1.1 */
174 #define HCD_USB2 0x0020 /* USB 2.0 */
176 /* called to init HCD and root hub */
177 int (*reset
) (struct usb_hcd
*hcd
);
178 int (*start
) (struct usb_hcd
*hcd
);
180 /* called after all devices were suspended */
181 int (*suspend
) (struct usb_hcd
*hcd
, u32 state
);
183 /* called before any devices get resumed */
184 int (*resume
) (struct usb_hcd
*hcd
);
186 /* cleanly make HCD stop writing memory and doing I/O */
187 void (*stop
) (struct usb_hcd
*hcd
);
189 /* return current frame number */
190 int (*get_frame_number
) (struct usb_hcd
*hcd
);
192 /* memory lifecycle */
193 struct usb_hcd
*(*hcd_alloc
) (void);
194 void (*hcd_free
) (struct usb_hcd
*hcd
);
196 /* manage i/o requests, device state */
197 int (*urb_enqueue
) (struct usb_hcd
*hcd
, struct urb
*urb
,
199 int (*urb_dequeue
) (struct usb_hcd
*hcd
, struct urb
*urb
);
201 /* hw synch, freeing endpoint resources that urb_dequeue can't */
202 void (*endpoint_disable
)(struct usb_hcd
*hcd
,
203 struct hcd_dev
*dev
, int bEndpointAddress
);
205 /* root hub support */
206 int (*hub_status_data
) (struct usb_hcd
*hcd
, char *buf
);
207 int (*hub_control
) (struct usb_hcd
*hcd
,
208 u16 typeReq
, u16 wValue
, u16 wIndex
,
209 char *buf
, u16 wLength
);
212 // old version, "just in case"
215 const char *description
; /* "ehci-hcd" etc */
218 int (*irq
) (struct usb_hcd
*hcd
, struct pt_regs
*regs
);
221 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
222 #define HCD_USB11 0x0010 /* USB 1.1 */
223 #define HCD_USB2 0x0020 /* USB 2.0 */
225 /* called to init HCD and root hub */
226 int (*start
) (struct usb_hcd
*hcd
);
228 /* called after all devices were suspended */
229 int (*suspend
) (struct usb_hcd
*hcd
, u32 state
);
231 /* called before any devices get resumed */
232 int (*resume
) (struct usb_hcd
*hcd
);
234 /* cleanly make HCD stop writing memory and doing I/O */
235 void (*stop
) (struct usb_hcd
*hcd
);
237 /* return current frame number */
238 int (*get_frame_number
) (struct usb_hcd
*hcd
);
240 /* memory lifecycle */
241 struct usb_hcd
*(*hcd_alloc
) (void);
242 void (*hcd_free
) (struct usb_hcd
*hcd
);
244 /* manage i/o requests, device state */
245 int (*urb_enqueue
) (struct usb_hcd
*hcd
, struct urb
*urb
,
247 int (*urb_dequeue
) (struct usb_hcd
*hcd
, struct urb
*urb
);
249 /* hw synch, freeing endpoint resources that urb_dequeue can't */
250 void (*endpoint_disable
)(struct usb_hcd
*hcd
,
251 struct hcd_dev
*dev
, int bEndpointAddress
);
253 /* root hub support */
254 int (*hub_status_data
) (struct usb_hcd
*hcd
, char *buf
);
255 int (*hub_control
) (struct usb_hcd
*hcd
,
256 u16 typeReq
, u16 wValue
, u16 wIndex
,
257 char *buf
, u16 wLength
);
261 extern void STDCALL
usb_hcd_giveback_urb (struct usb_hcd
*hcd
, struct urb
*urb
, struct pt_regs
*regs
);
262 extern void STDCALL
usb_bus_init (struct usb_bus
*bus
);
263 extern void usb_rh_status_dequeue (struct usb_hcd
*hcd
, struct urb
*urb
);
267 struct pci_device_id
;
268 extern int STDCALL
usb_hcd_pci_probe (struct pci_dev
*dev
,
269 const struct pci_device_id
*id
);
270 extern void STDCALL
usb_hcd_pci_remove (struct pci_dev
*dev
);
273 // FIXME: see Documentation/power/pci.txt (2.4.6 and later?)
274 // extern int usb_hcd_pci_save_state (struct pci_dev *dev, u32 state);
275 extern int usb_hcd_pci_suspend (struct pci_dev
*dev
, u32 state
);
276 extern int usb_hcd_pci_resume (struct pci_dev
*dev
);
277 // extern int usb_hcd_pci_enable_wake (struct pci_dev *dev, u32 state, int flg);
278 #endif /* CONFIG_PM */
280 #endif /* CONFIG_PCI */
282 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
283 int hcd_buffer_create (struct usb_hcd
*hcd
);
284 void hcd_buffer_destroy (struct usb_hcd
*hcd
);
286 void *hcd_buffer_alloc (struct usb_bus
*bus
, size_t size
,
287 int mem_flags
, dma_addr_t
*dma
);
288 void hcd_buffer_free (struct usb_bus
*bus
, size_t size
,
289 void *addr
, dma_addr_t dma
);
291 /* generic bus glue, needed for host controllers that don't use PCI */
292 extern struct usb_operations usb_hcd_operations
;
293 extern irqreturn_t
usb_hcd_irq (int irq
, void *__hcd
, struct pt_regs
*r
);
294 extern void STDCALL
usb_hc_died (struct usb_hcd
*hcd
);
296 /* -------------------------------------------------------------------------- */
298 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
299 extern int usb_new_device(struct usb_device
*dev
, struct device
*parent
);
300 extern void STDCALL
usb_connect(struct usb_device
*dev
);
301 extern void usb_disconnect(struct usb_device
**);
303 /* exported to hub driver ONLY to support usb_reset_device () */
304 extern int usb_get_configuration(struct usb_device
*dev
);
305 extern void usb_set_maxpacket(struct usb_device
*dev
);
306 extern void usb_destroy_configuration(struct usb_device
*dev
);
307 extern int usb_set_address(struct usb_device
*dev
);
309 /* use these only before the device's address has been set */
310 #define usb_snddefctrl(dev) ((PIPE_CONTROL << 30))
311 #define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | USB_DIR_IN)
313 /*-------------------------------------------------------------------------*/
316 * HCD Root Hub support
321 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
322 #define DeviceRequest \
323 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
324 #define DeviceOutRequest \
325 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
327 #define InterfaceRequest \
328 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
330 #define EndpointRequest \
331 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
332 #define EndpointOutRequest \
333 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
335 /* table 9.6 standard features */
336 #define DEVICE_REMOTE_WAKEUP 1
337 #define ENDPOINT_HALT 0
339 /* class requests from the USB 2.0 hub spec, table 11-15 */
340 /* GetBusState and SetHubDescriptor are optional, omitted */
341 #define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
342 #define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
343 #define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
344 #define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
345 #define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
346 #define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
347 #define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
350 /*-------------------------------------------------------------------------*/
353 * Generic bandwidth allocation constants/support
355 #define FRAME_TIME_USECS 1000L
356 #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
357 /* Trying not to use worst-case bit-stuffing
358 of (7/6 * 8 * bytecount) = 9.33 * bytecount */
359 /* bytecount = data payload byte count */
361 #define NS_TO_US(ns) ((ns + 500L) / 1000L)
362 /* convert & round nanoseconds to microseconds */
364 extern void STDCALL
usb_claim_bandwidth (struct usb_device
*dev
, struct urb
*urb
,
365 int bustime
, int isoc
);
366 extern void STDCALL
usb_release_bandwidth (struct usb_device
*dev
, struct urb
*urb
,
370 * Full/low speed bandwidth allocation constants/support.
372 #define BW_HOST_DELAY 1000L /* nanoseconds */
373 #define BW_HUB_LS_SETUP 333L /* nanoseconds */
374 /* 4 full-speed bit times (est.) */
376 #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
377 #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
378 #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
380 extern int STDCALL
usb_check_bandwidth (struct usb_device
*dev
, struct urb
*urb
);
383 * Ceiling microseconds (typical) for that many bytes at high speed
384 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
385 * to preallocate bandwidth)
387 #define USB2_HOST_DELAY 5 /* nsec, guess */
388 #define HS_USECS(bytes) NS_TO_US ( ((55 * 8 * 2083)/1000) \
389 + ((2083UL * (3167 + BitTime (bytes)))/1000) \
391 #define HS_USECS_ISO(bytes) NS_TO_US ( ((long)(38 * 8 * 2.083)) \
392 + ((2083UL * (3167 + BitTime (bytes)))/1000) \
395 extern long STDCALL
usb_calc_bus_time (int speed
, int is_input
,
396 int isoc
, int bytecount
);
398 /*-------------------------------------------------------------------------*/
400 extern struct usb_bus STDCALL
*usb_alloc_bus (struct usb_operations
*);
401 extern void STDCALL
usb_free_bus (struct usb_bus
*);
403 extern void STDCALL
usb_register_bus (struct usb_bus
*);
404 extern void STDCALL
usb_deregister_bus (struct usb_bus
*);
406 extern int STDCALL
usb_register_root_hub (struct usb_device
*usb_dev
,
407 struct device
*parent_dev
);
409 /* for portability to 2.4, hcds should call this */
410 static inline int hcd_register_root (struct usb_hcd
*hcd
)
412 return usb_register_root_hub (
413 hcd_to_bus (hcd
)->root_hub
, hcd
->controller
);
416 /*-------------------------------------------------------------------------*/
418 /* exported only within usbcore */
420 extern struct list_head usb_bus_list
;
421 extern struct semaphore usb_bus_list_lock
;
423 extern void usb_bus_get (struct usb_bus
*bus
);
424 extern void usb_bus_put (struct usb_bus
*bus
);
426 extern int usb_find_interface_driver (struct usb_device
*dev
,
427 struct usb_interface
*interface
);
429 #define usb_endpoint_halt(dev, ep, out) ((dev)->halted[out] |= (1 << (ep)))
431 #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
434 * USB device fs stuff
437 #ifdef CONFIG_USB_DEVICEFS
440 * these are expected to be called from the USB core/hub thread
441 * with the kernel lock held
443 extern void usbfs_add_bus(struct usb_bus
*bus
);
444 extern void usbfs_remove_bus(struct usb_bus
*bus
);
445 extern void usbfs_add_device(struct usb_device
*dev
);
446 extern void usbfs_remove_device(struct usb_device
*dev
);
447 extern void usbfs_update_special (void);
449 extern int usbfs_init(void);
450 extern void usbfs_cleanup(void);
452 #else /* CONFIG_USB_DEVICEFS */
454 static inline void usbfs_add_bus(struct usb_bus
*bus
) {}
455 static inline void usbfs_remove_bus(struct usb_bus
*bus
) {}
456 static inline void usbfs_add_device(struct usb_device
*dev
)
460 PDEVICE_OBJECT Pdo
= (PDEVICE_OBJECT
)dev
->parent
->dev
.dev_ext
;
461 IoInvalidateDeviceRelations(Pdo
, BusRelations
);
464 static inline void usbfs_remove_device(struct usb_device
*dev
) {}
465 static inline void usbfs_update_special (void) {}
467 static inline int usbfs_init(void) { return 0; }
468 static inline void usbfs_cleanup(void) { }
470 #endif /* CONFIG_USB_DEVICEFS */
472 /*-------------------------------------------------------------------------*/
474 /* hub.h ... DeviceRemovable in 2.4.2-ac11, gone in 2.4.10 */
475 // bleech -- resurfaced in 2.4.11 or 2.4.12
476 #define bitmap DeviceRemovable
479 /*-------------------------------------------------------------------------*/
483 #define RUN_CONTEXT (in_irq () ? "in_irq" \
484 : (in_interrupt () ? "in_interrupt" : "can sleep"))
487 #endif /* __KERNEL__ */