[MBEDTLS] Update mbedtls to v2.1.1. By Ismael Ferreras Morezuelas with a fix by Roy...
[reactos.git] / reactos / include / reactos / libs / mbedtls / blowfish.h
1 /**
2 * \file blowfish.h
3 *
4 * \brief Blowfish block cipher
5 *
6 * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
7 * SPDX-License-Identifier: Apache-2.0
8 *
9 * Licensed under the Apache License, Version 2.0 (the "License"); you may
10 * not use this file except in compliance with the License.
11 * You may obtain a copy of the License at
12 *
13 * http://www.apache.org/licenses/LICENSE-2.0
14 *
15 * Unless required by applicable law or agreed to in writing, software
16 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
17 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
18 * See the License for the specific language governing permissions and
19 * limitations under the License.
20 *
21 * This file is part of mbed TLS (https://tls.mbed.org)
22 */
23 #ifndef MBEDTLS_BLOWFISH_H
24 #define MBEDTLS_BLOWFISH_H
25
26 #if !defined(MBEDTLS_CONFIG_FILE)
27 #include "config.h"
28 #else
29 #include MBEDTLS_CONFIG_FILE
30 #endif
31
32 #include <stddef.h>
33 #include <stdint.h>
34
35 #define MBEDTLS_BLOWFISH_ENCRYPT 1
36 #define MBEDTLS_BLOWFISH_DECRYPT 0
37 #define MBEDTLS_BLOWFISH_MAX_KEY_BITS 448
38 #define MBEDTLS_BLOWFISH_MIN_KEY_BITS 32
39 #define MBEDTLS_BLOWFISH_ROUNDS 16 /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */
40 #define MBEDTLS_BLOWFISH_BLOCKSIZE 8 /* Blowfish uses 64 bit blocks */
41
42 #define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH -0x0016 /**< Invalid key length. */
43 #define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH -0x0018 /**< Invalid data input length. */
44
45 #if !defined(MBEDTLS_BLOWFISH_ALT)
46 // Regular implementation
47 //
48
49 #ifdef __cplusplus
50 extern "C" {
51 #endif
52
53 /**
54 * \brief Blowfish context structure
55 */
56 typedef struct
57 {
58 uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2]; /*!< Blowfish round keys */
59 uint32_t S[4][256]; /*!< key dependent S-boxes */
60 }
61 mbedtls_blowfish_context;
62
63 /**
64 * \brief Initialize Blowfish context
65 *
66 * \param ctx Blowfish context to be initialized
67 */
68 void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx );
69
70 /**
71 * \brief Clear Blowfish context
72 *
73 * \param ctx Blowfish context to be cleared
74 */
75 void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx );
76
77 /**
78 * \brief Blowfish key schedule
79 *
80 * \param ctx Blowfish context to be initialized
81 * \param key encryption key
82 * \param keybits must be between 32 and 448 bits
83 *
84 * \return 0 if successful, or MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
85 */
86 int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key,
87 unsigned int keybits );
88
89 /**
90 * \brief Blowfish-ECB block encryption/decryption
91 *
92 * \param ctx Blowfish context
93 * \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
94 * \param input 8-byte input block
95 * \param output 8-byte output block
96 *
97 * \return 0 if successful
98 */
99 int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
100 int mode,
101 const unsigned char input[MBEDTLS_BLOWFISH_BLOCKSIZE],
102 unsigned char output[MBEDTLS_BLOWFISH_BLOCKSIZE] );
103
104 #if defined(MBEDTLS_CIPHER_MODE_CBC)
105 /**
106 * \brief Blowfish-CBC buffer encryption/decryption
107 * Length should be a multiple of the block
108 * size (8 bytes)
109 *
110 * \note Upon exit, the content of the IV is updated so that you can
111 * call the function same function again on the following
112 * block(s) of data and get the same result as if it was
113 * encrypted in one call. This allows a "streaming" usage.
114 * If on the other hand you need to retain the contents of the
115 * IV, you should either save it manually or use the cipher
116 * module instead.
117 *
118 * \param ctx Blowfish context
119 * \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
120 * \param length length of the input data
121 * \param iv initialization vector (updated after use)
122 * \param input buffer holding the input data
123 * \param output buffer holding the output data
124 *
125 * \return 0 if successful, or
126 * MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH
127 */
128 int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
129 int mode,
130 size_t length,
131 unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE],
132 const unsigned char *input,
133 unsigned char *output );
134 #endif /* MBEDTLS_CIPHER_MODE_CBC */
135
136 #if defined(MBEDTLS_CIPHER_MODE_CFB)
137 /**
138 * \brief Blowfish CFB buffer encryption/decryption.
139 *
140 * \note Upon exit, the content of the IV is updated so that you can
141 * call the function same function again on the following
142 * block(s) of data and get the same result as if it was
143 * encrypted in one call. This allows a "streaming" usage.
144 * If on the other hand you need to retain the contents of the
145 * IV, you should either save it manually or use the cipher
146 * module instead.
147 *
148 * \param ctx Blowfish context
149 * \param mode MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
150 * \param length length of the input data
151 * \param iv_off offset in IV (updated after use)
152 * \param iv initialization vector (updated after use)
153 * \param input buffer holding the input data
154 * \param output buffer holding the output data
155 *
156 * \return 0 if successful
157 */
158 int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
159 int mode,
160 size_t length,
161 size_t *iv_off,
162 unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE],
163 const unsigned char *input,
164 unsigned char *output );
165 #endif /*MBEDTLS_CIPHER_MODE_CFB */
166
167 #if defined(MBEDTLS_CIPHER_MODE_CTR)
168 /**
169 * \brief Blowfish-CTR buffer encryption/decryption
170 *
171 * Warning: You have to keep the maximum use of your counter in mind!
172 *
173 * \param ctx Blowfish context
174 * \param length The length of the data
175 * \param nc_off The offset in the current stream_block (for resuming
176 * within current cipher stream). The offset pointer to
177 * should be 0 at the start of a stream.
178 * \param nonce_counter The 64-bit nonce and counter.
179 * \param stream_block The saved stream-block for resuming. Is overwritten
180 * by the function.
181 * \param input The input data stream
182 * \param output The output data stream
183 *
184 * \return 0 if successful
185 */
186 int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx,
187 size_t length,
188 size_t *nc_off,
189 unsigned char nonce_counter[MBEDTLS_BLOWFISH_BLOCKSIZE],
190 unsigned char stream_block[MBEDTLS_BLOWFISH_BLOCKSIZE],
191 const unsigned char *input,
192 unsigned char *output );
193 #endif /* MBEDTLS_CIPHER_MODE_CTR */
194
195 #ifdef __cplusplus
196 }
197 #endif
198
199 #else /* MBEDTLS_BLOWFISH_ALT */
200 #include "blowfish_alt.h"
201 #endif /* MBEDTLS_BLOWFISH_ALT */
202
203 #endif /* blowfish.h */