# Well-known targets: # # all (default target) # This target builds all of ReactOS. # # module # These targets builds a single module. Replace module with the name of # the module you want to build. # # bootcd # This target builds an ISO (ReactOS.iso) from which ReactOS can be booted # and installed. # # livecd # This target builds an ISO (ReactOS-Live.iso) from which ReactOS can be # booted, but not installed. # # install # This target installs all of ReactOS to a location specified by the # ROS_INSTALL environment variable. # # module_install # These targets installs a single module to a location specified by the # ROS_INSTALL environment variable. Replace module with the name of the # module you want to install. # # clean # This target cleans (deletes) all files that are generated when building # ReactOS. # # module_clean # These targets cleans (deletes) files that are generated when building a # single module. Replace module with the name of the module you want to # clean. # # depends # This target does a complete dependency check of the ReactOS codebase. # This can require several minutes to complete. If you only need to check # dependencies for a single or few modules then you can use the # module_depends targets instead. This target can also repair a damaged or # missing makefile.auto if needed. # # module_depends # These targets do a dependency check of individual modules. Replace module # with the name of the module for which you want to check dependencies. # This is faster than the depends target which does a complete dependency # check of the ReactOS codebase. # # # Accepted environment variables: # # ROS_PREFIX # This variable specifies the prefix of the MinGW installation. On Windows # a prefix is usually not needed, but on linux it is usually "mingw32". If # not present and no executable named "gcc" can be found, then the prefix is # assumed to be "mingw32". If your gcc is named i386-mingw32-gcc then set # ROS_PREFIX to i386-mingw32. Don't include the dash (-) before gcc. # # ROS_INTERMEDIATE # This variable controls where to put intermediate files. Intermediate # files are generated files that are needed to generate the final # output files. Examples of intermediate files include *.o, *.a, and # *.coff. N.B. Don't put a path separator at the end. The variable # defaults to .\obj-i386. # # ROS_OUTPUT # This variable controls where to put output files. Output files are # generated files that makes up the result of the build process. # Examples of output files include *.exe, *.dll, and *.sys. N.B. Don't # put a path separator at the end. The variable defaults to .\output-i386. # # ROS_TEMPORARY # This variable controls where to put temporary files. Temporary files # are (usually small) generated files that are needed to generate the # intermediate or final output files. Examples of temporary files include # *.rci (preprocessed .rc files for wrc), *.tmp, and *.exp. N.B. Don't put # a path separator at the end. The variable defaults to the current # directory. # # ROS_INSTALL # This variable controls where to install output files to when using # 'make install'. N.B. Don't put a path separator at the end. The variable # defaults to .\reactos. # # ROS_BUILDMAP # This variable controls if map files are to be generated for executable # output files. Map files have the extension .map. The value can be either # full (to build map files with assembly code), yes (to build map files # without source code) or no (to not build any map files). The variable # defaults to no. # # ROS_BUILDNOSTRIP # This variable controls if non-symbol-stripped versions are to be built # of executable output files. Non-symbol-stripped executable output files # have .nostrip added to the filename just before the extension. The value # can be either yes (to build non-symbol-stripped versions of executable # output files) or no (to not build non-symbol-stripped versions of # executable output files). The variable defaults to no. # # ROS_RBUILDFLAGS # Pass parameters to rbuild. # -v Be verbose. # -c Clean as you go. Delete generated files as soon as they are not needed anymore. # -dd Disable automatic dependencies. # -dm{module} Check only automatic dependencies for this module. # -mi Let make handle creation of install directories. Rbuild will not generate the directories. # -ps Generate proxy makefiles in source tree instead of the output tree. # check for versions of make that don't have features we need... # the function "eval" is only available in 3.80+, which happens to be the minimum # version that has the features we use... # THIS CHECK IS BORROWED FROM THE "GMSL" PROJECT, AND IS COVERED BY THE GPL LICENSE # YOU CAN FIND OUT MORE ABOUT GMSL - A VERY COOL PROJECT - AT: # http://gmsl.sourceforge.net/ __gmsl_have_eval := __gmsl_ignore := $(eval __gmsl_have_eval := T) ifndef __gmsl_have_eval $(error ReactOS's makefiles use GNU Make 3.80+ features, you have $(MAKE_VERSION), you MUST UPGRADE in order to build ReactOS - Sorry) endif # END of code borrowed from GMSL ( http://gmsl.sourceforge.net/ ) .PHONY: all .PHONY: clean all: makefile.auto .SUFFIXES: ifeq ($(HOST),) ifeq ($(word 1,$(shell gcc -dumpmachine)),mingw32) ifeq ($(findstring msys,$(shell sh --version 2>nul)),msys) export OSTYPE = msys HOST=mingw32-linux else HOST=mingw32-windows endif else HOST=mingw32-linux endif endif # Default to half-verbose mode ifeq ($(VERBOSE),no) Q = @ HALFVERBOSEECHO = no BUILDNO_QUIET = -q else ifeq ($(VERBOSE),full) Q = HALFVERBOSEECHO = no BUILDNO_QUIET = else Q = @ HALFVERBOSEECHO = yes BUILDNO_QUIET = -q endif endif ifeq ($(HOST),mingw32-linux) QUOTE = " else QUOTE = endif ifeq ($(HALFVERBOSEECHO),yes) ECHO_CP =@echo $(QUOTE)[COPY] $@$(QUOTE) ECHO_MKDIR =@echo $(QUOTE)[MKDIR] $@$(QUOTE) ECHO_BUILDNO =@echo $(QUOTE)[BUILDNO] $@$(QUOTE) ECHO_INVOKE =@echo $(QUOTE)[INVOKE] $<$(QUOTE) ECHO_PCH =@echo $(QUOTE)[PCH] $@$(QUOTE) ECHO_CC =@echo $(QUOTE)[CC] $<$(QUOTE) ECHO_GAS =@echo $(QUOTE)[GAS] $<$(QUOTE) ECHO_NASM =@echo $(QUOTE)[NASM] $<$(QUOTE) ECHO_AR =@echo $(QUOTE)[AR] $@$(QUOTE) ECHO_WINEBLD =@echo $(QUOTE)[WINEBLD] $@$(QUOTE) ECHO_WRC =@echo $(QUOTE)[WRC] $@$(QUOTE) ECHO_WIDL =@echo $(QUOTE)[WIDL] $@$(QUOTE) ECHO_BIN2RES =@echo $(QUOTE)[BIN2RES] $<$(QUOTE) ECHO_DLLTOOL =@echo $(QUOTE)[DLLTOOL] $@$(QUOTE) ECHO_LD =@echo $(QUOTE)[LD] $@$(QUOTE) ECHO_NM =@echo $(QUOTE)[NM] $@$(QUOTE) ECHO_OBJDUMP =@echo $(QUOTE)[OBJDUMP] $@$(QUOTE) ECHO_RBUILD =@echo $(QUOTE)[RBUILD] $@$(QUOTE) ECHO_RSYM =@echo $(QUOTE)[RSYM] $@$(QUOTE) ECHO_WMC =@echo $(QUOTE)[WMC] $@$(QUOTE) ECHO_NCI =@echo $(QUOTE)[NCI] $@$(QUOTE) ECHO_CABMAN =@echo $(QUOTE)[CABMAN] $<$(QUOTE) ECHO_CDMAKE =@echo $(QUOTE)[CDMAKE] $@$(QUOTE) ECHO_MKHIVE =@echo $(QUOTE)[MKHIVE] $@$(QUOTE) ECHO_REGTESTS=@echo $(QUOTE)[REGTESTS] $@$(QUOTE) ECHO_TEST =@echo $(QUOTE)[TEST] $@$(QUOTE) ECHO_GENDIB =@echo $(QUOTE)[GENDIB] $@$(QUOTE) else ECHO_CP = ECHO_MKDIR = ECHO_BUILDNO = ECHO_INVOKE = ECHO_PCH = ECHO_CC = ECHO_GAS = ECHO_NASM = ECHO_AR = ECHO_WINEBLD = ECHO_WRC = ECHO_WIDL = ECHO_BIN2RES = ECHO_DLLTOOL = ECHO_LD = ECHO_NM = ECHO_OBJDUMP = ECHO_RBUILD = ECHO_RSYM = ECHO_WMC = ECHO_NCI = ECHO_CABMAN = ECHO_CDMAKE = ECHO_MKHIVE = ECHO_REGTESTS= ECHO_TEST = ECHO_GENDIB = endif host_gcc = $(Q)gcc host_gpp = $(Q)g++ host_ld = $(Q)ld host_ar = $(Q)ar host_objcopy = $(Q)objcopy ifeq ($(HOST),mingw32-linux) export EXEPREFIX = ./ ifeq ($(OSTYPE),msys) export EXEPOSTFIX = .exe else export EXEPOSTFIX = endif export SEP = / mkdir = -$(Q)mkdir -p gcc = $(Q)$(PREFIX)-gcc gpp = $(Q)$(PREFIX)-g++ ld = $(Q)$(PREFIX)-ld nm = $(Q)$(PREFIX)-nm objdump = $(Q)$(PREFIX)-objdump ar = $(Q)$(PREFIX)-ar objcopy = $(Q)$(PREFIX)-objcopy dlltool = $(Q)$(PREFIX)-dlltool windres = $(Q)$(PREFIX)-windres rm = $(Q)rm -f cp = $(Q)cp NUL = /dev/null else # mingw32-windows ifeq ($(OSTYPE),msys) HOST=mingw32-linux export EXEPREFIX = ./ export EXEPOSTFIX = .exe export SEP = / mkdir = -$(Q)mkdir -p gcc = $(Q)gcc gpp = $(Q)g++ ld = $(Q)ld nm = $(Q)nm objdump = $(Q)objdump ar = $(Q)ar objcopy = $(Q)objcopy dlltool = $(Q)dlltool windres = $(Q)windres rm = $(Q)rm -f cp = $(Q)cp NUL = /dev/null else export EXEPREFIX = export EXEPOSTFIX = .exe ROS_EMPTY = export SEP = \$(ROS_EMPTY) mkdir = -$(Q)mkdir gcc = $(Q)gcc gpp = $(Q)g++ ld = $(Q)ld nm = $(Q)nm objdump = $(Q)objdump ar = $(Q)ar objcopy = $(Q)objcopy dlltool = $(Q)dlltool windres = $(Q)windres rm = $(Q)del /f /q cp = $(Q)copy /y NUL = NUL endif endif ifneq ($(ROS_INTERMEDIATE),) INTERMEDIATE := $(ROS_INTERMEDIATE) else INTERMEDIATE := obj-i386 endif INTERMEDIATE_ := $(INTERMEDIATE)$(SEP) ifneq ($(ROS_OUTPUT),) OUTPUT := $(ROS_OUTPUT) else OUTPUT := output-i386 endif OUTPUT_ := $(OUTPUT)$(SEP) ifneq ($(ROS_TEMPORARY),) TEMPORARY := $(ROS_TEMPORARY) else TEMPORARY := endif TEMPORARY_ := $(TEMPORARY)$(SEP) ifneq ($(ROS_INSTALL),) INSTALL := $(ROS_INSTALL) else INSTALL := reactos endif INSTALL_ := $(INSTALL)$(SEP) $(INTERMEDIATE): ${mkdir} $@ ifneq ($(INTERMEDIATE),$(OUTPUT)) $(OUTPUT): ${mkdir} $@ endif NTOSKRNL_MC = ntoskrnl$(SEP)ntoskrnl.mc KERNEL32_MC = lib$(SEP)kernel32$(SEP)kernel32.mc BUILDNO_H = include$(SEP)reactos$(SEP)buildno.h BUGCODES_H = include$(SEP)reactos$(SEP)bugcodes.h BUGCODES_RC = ntoskrnl$(SEP)bugcodes.rc ERRCODES_H = include$(SEP)reactos$(SEP)errcodes.h ERRCODES_RC = lib$(SEP)kernel32$(SEP)errcodes.rc include lib/lib.mak include tools/tools.mak include boot/freeldr/bootsect/bootsect.mak -include makefile.auto PREAUTO := \ $(BIN2C_TARGET) \ $(BIN2RES_TARGET) \ $(BUILDNO_H) \ $(BUGCODES_H) \ $(BUGCODES_RC) \ $(ERRCODES_H) \ $(ERRCODES_RC) \ $(NCI_SERVICE_FILES) \ $(GENDIB_DIB_FILES) makefile.auto: $(RBUILD_TARGET) $(PREAUTO) $(XMLBUILDFILES) $(ECHO_RBUILD) $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) mingw .PHONY: msvc msvc: $(RBUILD_TARGET) $(ECHO_RBUILD) $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) msvc $(BUGCODES_H) $(BUGCODES_RC): $(WMC_TARGET) $(NTOSKRNL_MC) $(ECHO_WMC) $(Q)$(WMC_TARGET) -i -H $(BUGCODES_H) -o $(BUGCODES_RC) $(NTOSKRNL_MC) $(ERRCODES_H) $(ERRCODES_RC): $(WMC_TARGET) $(KERNEL32_MC) $(ECHO_WMC) $(Q)$(WMC_TARGET) -i -H $(ERRCODES_H) -o $(ERRCODES_RC) $(KERNEL32_MC) .PHONY: msvc6 msvc6: $(RBUILD_TARGET) $(ECHO_RBUILD) $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs6.00 msvc .PHONY: msvc7 msvc7: $(RBUILD_TARGET) $(ECHO_RBUILD) $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs7.00 msvc .PHONY: msvc71 msvc71: $(RBUILD_TARGET) $(ECHO_RBUILD) $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs7.10 msvc .PHONY: msvc8 msvc8: $(RBUILD_TARGET) $(ECHO_RBUILD) $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs8.00 msvc .PHONY: makefile_auto_clean makefile_auto_clean: -@$(rm) makefile.auto $(PREAUTO) 2>$(NUL) .PHONY: clean clean: makefile_auto_clean .PHONY: depends depends: @-$(rm) makefile.auto @$(MAKE) $(filter-out depends, $(MAKECMDGOALS))