static const conv_t conv_ANGLE[] = {
DECLARE_CONV_UNIT(ANGLE, DEGREES, "$", "$")
DECLARE_CONV_UNIT(ANGLE, GRADIANS, "$*0.9", "$/0.9")
- DECLARE_CONV_UNIT(ANGLE, RADIANS, "$*180/P", "$*P/180")
+ DECLARE_CONV_UNIT(ANGLE, RADIANS, "$/P*180", "$*P/180")
DECLARE_CONV_END
};
/*
1 acre ................ = 4840 square yd = 4046,8564224 mq
- 1 acre brazil ......... =
- 1 acre france ......... =
+ 1 acre brazil ......... =
+ 1 acre france ......... =
1 acre scots .......... = 5000 mq
1 acre us ............. = 4840*(36/39.37)^2 m = 6272640/1549.9969 m
1 are ................. = 100 mq
1 chou ................ = 108000*(10/33)^2 mq
- 1 danbo ............... =
+ 1 danbo ............... =
1 ha .................. = 10000 mq
- 1 jeongbo ............. =
- 1 morgen hungary ...... =
- 1 mu .................. =
- 1 ping ................ =
- 1 pyeong .............. =
- 1 pyeongbangja ........ =
- 1 rai ................. =
+ 1 jeongbo ............. =
+ 1 morgen hungary ...... =
+ 1 mu .................. = 2000/3 mq
+ 1 ping ................ =
+ 1 pyeong .............. =
+ 1 pyeongbangja ........ =
+ 1 rai ................. = 1600 mq
1 se .................. = 1080*(10/33)^2 mq
1 square cm ........... = 0.0001 mq
- 1 square chr .......... =
+ 1 square chr .......... =
1 square fathom ....... = 1.8288^2 = 3.34450944 mq
1 square fathom hungary = 1.8964838^2 = 3.59665080366244 mq
1 square ft ........... = 0,09290304 mq
1 square in ........... = 0,00064516 mq
1 square km ........... = 1000000 mq
- 1 square lar .......... =
+ 1 square lar .......... =
1 square mile ......... = 1609.344^2 = 2589988.110336 mq
1 square mm ........... = 0,000001 mq
1 square shaku ........ = (10/33)^2 mq
- 1 square tsuen ........ =
- 1 square va ........... =
+ 1 square tsuen ........ =
+ 1 square va ........... =
1 square yard ......... = 0,83612736 mq
1 tan ................. = 10800*(10/33)^2 mq
1 tsubo ............... = 36*(10/33)^2 mq
DECLARE_CONV_UNIT(AREA, HECTARES, "$*10000", "$/10000")
// DECLARE_CONV_UNIT(AREA, JEONGBO, "$", "$")
// DECLARE_CONV_UNIT(AREA, MORGEN_HUNGARY, "$", "$")
-// DECLARE_CONV_UNIT(AREA, MU, "$", "$")
+ DECLARE_CONV_UNIT(AREA, MU, "$*(2000/3)", "$/(2000/3)")
// DECLARE_CONV_UNIT(AREA, PING, "$", "$")
// DECLARE_CONV_UNIT(AREA, PYEONG, "$", "$")
// DECLARE_CONV_UNIT(AREA, PYEONGBANGJA, "$", "$")
-// DECLARE_CONV_UNIT(AREA, RAI, "$", "$")
+ DECLARE_CONV_UNIT(AREA, RAI, "$*1600", "$/1600")
DECLARE_CONV_UNIT(AREA, SE, "$*108000/1089", "$*1089/108000")
DECLARE_CONV_UNIT(AREA, SQUARE_CENTIMETERS, "$*0,0001", "$/0,0001")
// DECLARE_CONV_UNIT(AREA, SQUARE_CHR, "$", "$")
1 barleycorn ..... = 1/3 inch = 0.9144/108 m
1 cm ............. = 1/100 m
1 chain uk ....... = 22 yards = 22*0.9144 m
- 1 chi ............ =
+ 1 chi ............ = 1/3 m
1 chou ........... = 3600/33 m
- 1 chr ............ =
+ 1 chr ............ =
+ 1 cun ............ = 1/10 chi = 1/30 m
1 fathom ......... = 2 yard = 2*0.9144 m
1 fathom ungary .. = 1.8964838 m (fixed)
1 feet ........... = 12 inch = 0.9144/3 m
1 furlong ........ = 10 chains = 220*0.9144 m
- 1 gan ............ =
+ 1 gan ............ =
1 hand ........... = 4 inches = 0.9144/9 m
- 1 hunh ........... =
+ 1 hunh ........... =
1 inch ........... = yard/36 = 0.9144/36 m
- 1 ja ............. =
- 1 jeong .......... =
- 1 kabiet ......... =
+ 1 ja ............. =
+ 1 jeong .......... =
+ 1 kabiet ......... =
1 ken ............ = 60/33 m
- 1 keub ........... =
+ 1 keub ........... =
1 km ............. = 1000 m
- 1 lar ............ =
+ 1 lar ............ =
1 light year ..... = 9460730472580800 m
1 link uk ........ = 0.01 chains = 0.22*0.9144 m
1 micron ......... = 0.000001 m
1 mile ........... = 1760 yards = 1609.344 m
1 millimeter ..... = 1/1000 m
1 nautical mile .. = 1852 m
- 1 nieu ........... =
+ 1 nieu ........... =
1 parsec ......... = 30856800000000000 m
1 pica ........... = yard/216 = 0.9144/216 m
- 1 ri japan ....... =
- 1 ri korea ....... =
+ 1 ri japan ....... =
+ 1 ri korea ....... =
1 rod ............ = 5.0292 m
- 1 sawk ........... =
- 1 sen ............ =
+ 1 sawk ........... =
+ 1 sen ............ =
1 shaku .......... = 10/33 m
1 span ........... = 9 inches = 0.9144/4 m
- 1 sun ............ = 10/330 m
- 1 tsuen .......... =
- 1 va ............. =
+ 1 sun ............ = 1/33 m
+ 1 tsuen .......... =
+ 1 va ............. =
1 yard ........... = 0.9144 m
- 1 yote ........... =
- 1 zhang .......... =
+ 1 yote ........... =
+ 1 zhang .......... =
*/
static const conv_t conv_LENGTH[] = {
DECLARE_CONV_UNIT(LENGTH, ANGSTROMS, "$*0.0000000001", "$/0.0000000001")
DECLARE_CONV_UNIT(LENGTH, BARLEYCORNS, "$*0.9144/108", "$/0.9144*108")
DECLARE_CONV_UNIT(LENGTH, CENTIMETERS, "$/100", "$*100")
DECLARE_CONV_UNIT(LENGTH, CHAINS_UK, "$*20.1168", "$/20.1168")
-// DECLARE_CONV_UNIT(LENGTH, CHI, "$", "$")
+ DECLARE_CONV_UNIT(LENGTH, CHI, "$/3", "$*3")
DECLARE_CONV_UNIT(LENGTH, CHOU, "$*3600/33", "$*33/3600")
// DECLARE_CONV_UNIT(LENGTH, CHR, "$", "$")
-// DECLARE_CONV_UNIT(LENGTH, CUN, "$", "$")
+ DECLARE_CONV_UNIT(LENGTH, CUN, "$/30", "$*30")
DECLARE_CONV_UNIT(LENGTH, FATHOMS, "$*1.8288", "$/1.8288")
DECLARE_CONV_UNIT(LENGTH, FATHOMS_HUNGARY, "$*1.8964838", "$/1.8964838")
DECLARE_CONV_UNIT(LENGTH, FEET, "$*0.3048", "$/0.3048")
// DECLARE_CONV_UNIT(LENGTH, SEN, "$", "$")
DECLARE_CONV_UNIT(LENGTH, SHAKU, "$*10/33", "$*33/10")
DECLARE_CONV_UNIT(LENGTH, SPAN, "$*0.9144/4", "$*4/0.9144")
- DECLARE_CONV_UNIT(LENGTH, SUN, "$*10/330", "$*330/10")
+ DECLARE_CONV_UNIT(LENGTH, SUN, "$*1/33", "$*33")
// DECLARE_CONV_UNIT(LENGTH, TSUEN, "$", "$")
// DECLARE_CONV_UNIT(LENGTH, VA, "$", "$")
DECLARE_CONV_UNIT(LENGTH, YARDS, "$*0.9144", "$/0.9144")
1 hPa = 100 Pa
1 kPa = 1000 Pa
1 mm HG = 133.322 Pa
- 1 psi = 6894.757 Pa
+ 1 psi = 6894.757 Pa
*/
static const conv_t conv_PRESSURE[] = {
DECLARE_CONV_UNIT(PRESSURE, ATMOSPHERES, "$*101325", "$/101325")
1 hour ...... = 3600 s
1 microsecond = 0.000001 s
1 millisecond = 0.001 s
+ 1 nanosecond. = 0.000000001 s
1 minute .... = 60 s
1 week ...... = 669600 s
*/
static const conv_t conv_TIME[] = {
- DECLARE_CONV_UNIT(TIME, MINUTES, "$*60", "$/60")
- DECLARE_CONV_UNIT(TIME, DAYS, "$*86400", "$/86400")
- DECLARE_CONV_UNIT(TIME, HOURS, "$*3600", "$/3600")
- DECLARE_CONV_UNIT(TIME, MILLISECONDS, "$*0.001", "$/0.001")
- DECLARE_CONV_UNIT(TIME, MICROSECONDS, "$*0.000001", "$/0.000001")
- DECLARE_CONV_UNIT(TIME, SECONDS, "$", "$")
- DECLARE_CONV_UNIT(TIME, WEEKS, "$*604800", "$/604800")
- DECLARE_CONV_UNIT(TIME, YEARS, "$*31556952", "$/31556952")
+ DECLARE_CONV_UNIT(TIME, MINUTES, "$*60", "$/60")
+ DECLARE_CONV_UNIT(TIME, DAYS, "$*86400", "$/86400")
+ DECLARE_CONV_UNIT(TIME, HOURS, "$*3600", "$/3600")
+ DECLARE_CONV_UNIT(TIME, MILLISECONDS, "$*0.001", "$/0.001")
+ DECLARE_CONV_UNIT(TIME, MICROSECONDS, "$*0.000001", "$/0.000001")
+ DECLARE_CONV_UNIT(TIME, NANOSECONDS, "$*0.000000001", "$/0.000000001")
+ DECLARE_CONV_UNIT(TIME, SECONDS, "$", "$")
+ DECLARE_CONV_UNIT(TIME, WEEKS, "$*604800", "$/604800")
+ DECLARE_CONV_UNIT(TIME, YEARS, "$*31556952", "$/31556952")
DECLARE_CONV_END
};
*/
static const conv_t conv_TEMPERATURE[] = {
DECLARE_CONV_UNIT(TEMPERATURE, CELSIUS, "$+273.15", "$-273.15")
- DECLARE_CONV_UNIT(TEMPERATURE, FAHRENHEIT, "($-459.67)*5/9", "$*9/5-459.67")
+ DECLARE_CONV_UNIT(TEMPERATURE, FAHRENHEIT, "($+459.67)*5/9", "$*9/5-459.67")
DECLARE_CONV_UNIT(TEMPERATURE, KELVIN, "$", "$")
DECLARE_CONV_UNIT(TEMPERATURE, RANKINE, "$*5/9", "$*9/5")
DECLARE_CONV_END
/*
1 barrel uk ...... = 163.65924 l
1 barrel oil ..... = 158.987295 l
- 1 bun ............ =
+ 1 bun ............ =
1 bushel uk ...... = 36.36872 l
1 bushel us ...... = 35.23907017 l
1 cubic cm ...... = 0.001 l
1 cubic inch ..... = 0.016387064 l
1 cubic meter .... = 1000 l
1 cubic yard ..... = 764.554857 l
- 1 doe ............ =
+ 1 doe ............ =
1 fluid ounce uk = 0.0284130625 l
1 fluid ounce us = 0.0295735295625 l
1 gallon uk ...... = 4.54609 l
1 gallon dry us .. = 4.40488377086 l
1 gallon liquid us = 3.785411784 l
1 gou ............ = 0.1809 l
- 1 hop ............ =
- 1 icce ........... =
- 1 kwian .......... =
- 1 mal ............ =
+ 1 hop ............ =
+ 1 icce ........... =
+ 1 kwian .......... =
+ 1 mal ............ =
1 milliliter ..... = 0.001 l
1 pint uk ........ = 0.56826125 l
1 pint dry us .... = 0.5506104713575 l
1 quart uk ....... = 1.1365225 l
1 quart dry us ... = 1.101220942715 l
1 quart liquid us = 0.946352946 l
- 1 seki ........... =
- 1 syou ........... =
- 1 tananloung ..... =
- 1 tang ........... =
+ 1 seki ........... =
+ 1 syou ........... =
+ 1 tananloung ..... =
+ 1 tang ........... =
1 to ............. = 18040 l
*/
static const conv_t conv_VOLUME[] = {
/*
1 baht ............ = 12.244 g
1 carat ........... = 0.2 g
- 1 chung ........... =
- 1 don ............. =
- 1 geun ............ =
- 1 gwan ............ =
- 1 harb ............ =
- 1 jin china ....... =
- 1 jin taiwan ...... =
- 1 Kan ............. =
+ 1 chung ........... =
+ 1 don ............. =
+ 1 geun ............ =
+ 1 gwan ............ =
+ 1 harb ............ =
+ 1 jin china ....... =
+ 1 jin taiwan ...... =
+ 1 Kan ............. = 3750 g
1 Kilograms ....... = 1000 g
- 1 Kin ............. =
+ 1 Kin ............. = 600 g
1 Liang China ..... =
1 Liang Taiwan .... =
1 monme ........... = 3.75 g
1 ounce troy ...... = 31.1034768 g
1 pound ........... = 453.59237 g
1 quintal metric .. = 100000 g
- 1 saloung ......... =
+ 1 saloung ......... =
1 stone ........... = 6350.29318 g
- 1 tamlung ......... =
+ 1 tamlung ......... =
1 ton ............. = 1000000 g
1 ton uk .......... = 1016046.9088 g // long ton
1 ton us .......... = 907184.74 g // short ton
// DECLARE_CONV_UNIT(WEIGHT, HARB, "$", "$")
// DECLARE_CONV_UNIT(WEIGHT, JIN_CHINA, "$", "$")
// DECLARE_CONV_UNIT(WEIGHT, JIN_TAIWAN, "$", "$")
-// DECLARE_CONV_UNIT(WEIGHT, KAN, "$", "$")
+ DECLARE_CONV_UNIT(WEIGHT, KAN, "$*3750", "$/3750")
DECLARE_CONV_UNIT(WEIGHT, KILOGRAMS, "$*1000", "$/1000")
-// DECLARE_CONV_UNIT(WEIGHT, KIN, "$", "$")
+ DECLARE_CONV_UNIT(WEIGHT, KIN, "$*600", "$/600")
// DECLARE_CONV_UNIT(WEIGHT, LIANG_CHINA, "$", "$")
// DECLARE_CONV_UNIT(WEIGHT, LIANG_TAIWAN, "$", "$")
DECLARE_CONV_UNIT(WEIGHT, MONME, "$*3.75", "$/3.75")
break;
}
}
-
+
/* The units can be sorted, so I must search the exact match */
item = items;
SendDlgItemMessage(hWnd, IDC_COMBO_FROM, CB_GETLBTEXT, from, (LPARAM)txt_cb);
projects / reactos.git / blobdiff