[Version]
Signature = "$ReactOS$"
-[Directories]
+;
+; The [SourceDisksNames] section lists all the available installation media
+; where the installation files can be found. It can specifies media common
+; to all architectures, or media specific to a given architecture (x86, amd64,
+; and so on...) within [SourceDisksNames.x86] (etc...) sections.
+;
+; The format of each line is as follows:
+; <disk_id> = <description>,<tagfile>,<unused>,<subdirectory>,<flags>,<tagfile>
+;
+[SourceDisksNames]
+_1 = %cdname%,%cdtagfile%,,""
+
+[SourceDisksNames.x86]
+;1 = %cdname%,%cdtagfilei%,,\i386
+1 = %cdname%,%cdtagfilei%,,\reactos
+
+[SourceDisksNames.amd64]
+1 = %cdname%,%cdtagfilea%,,\amd64
+
+;
+; The directories listed in the [Directories] or [WinntDirectories] sections
+; are relative to the installation source or destination directories.
+;
+; The format of each line is as follows:
; <directory_id> = <path>
+;
+; For specifying absolute directories, use the SystemPartitionFiles section,
+; or use names starting with \.
+;
+[Directories]
1 = "\"
2 = system32
3 = system32\config
[DiskSpaceRequirements]
; Required free system partition disk space in MB
-FreeSysPartDiskSpace=350
+FreeSysPartDiskSpace=450
+;
+; The [SourceDisksFiles] section lists all the files available to the
+; installer. It can specifies files common to all architectures, or files
+; specific to a given architecture (x86, amd64, and so on...) within
+; [SourceDisksFiles.x86] (etc...) sections.
+;
+; Each line provides the location of a file in the installation media
+; and its destination when being installed on a target architecture.
+; The format of each line is as follows:
+;
+; <source_filename> =
+; <disk_id>,<subdirectory>,<file_size>,<checksum>,<unused>,<unused>,
+; NT-specific fields:
+; <boot_media_id>,<destination_dir_id>,<upgrade_dispo>,<install_dispo>,
+; <destination_filename>,
+; WinPE(MiniNT)-specific optional fields:
+; <WinPE_disk_id>,<WinPE_directory_id>
+;
+; The 'disk_id', 'boot_media_id' and 'WinPE_disk_id' media IDs refer to
+; source media listed in the [SourceDisksNames] section. The 'boot_media_id'
+; value specifies any additional boot/installation media.
+;
+; The values for the disposition flags 'upgrade_dispo' (used when upgrading)
+; or 'install_dispo' (used when installing, usually by the text-mode installer)
+; are:
+; 0: always copy (default);
+; 1: copy if present;
+; 2: copy if not present;
+; 3: never copy.
+;
+; The 'destination_dir_id' and 'WinPE_directory_id' directory IDs refer to
+; the directories listed in the [Directories] section.
+;
+; ReactOS-specific: we don't use 'boot_media_id' yet and instead, we use
+; an identifier 'x' to signal the SetupLdr that it has to load the file.
+; This must be replaced by handling the "DiskDrivers.Load", "FileSystems.Load",
+; ("Hal.Load", "Display.Load"), "SCSI.Load", "BootBusExtenders.Load",
+; "BusExtenders.Load", "InputDevicesSupport.Load", "Keyboard.Load",
+; "ScsiClass.Load", "FloppyDrivers.Load", "CdRomDrivers.Load", and
+; "MouseDrivers.Load" sections.
+;
[SourceDisksFiles]
-acpi.sys=,,,,,,,,,,,,4
-nmidebug.sys=,,,,,,x,,,,,,4
-sacdrv.sys=,,,,,,x,,,,,,4
-uniata.sys=,,,,,,x,,,,,,4
-buslogic.sys=,,,,,,x,,,,,,4
-blue.sys=,,,,,,x,,,,,,4
-bootvid.dll=,,,,,,,,,,,,2
-c_437.nls=,,,,,,,,,,,,2
-c_1252.nls=,,,,,,,,,,,,2
-cdfs.sys=,,,,,,x,,,,,,4
-cdrom.sys=,,,,,,x,,,,,,4
-class2.sys=,,,,,,x,,,,,,4
-isapnp.sys=,,,,,,,,,,,,4
-kdcom.dll=,,,,,,,,,,,,2
-disk.sys=,,,,,,x,,,,,,4
-floppy.sys=,,,,,,x,,,,,,4
-i8042prt.sys=,,,,,,,,,,,,4
-hidclass.sys=,,,,,,,,,,,,4
-hidparse.sys=,,,,,,,,,,,,4
-hidusb.sys=,,,,,,,,,,,,4
-usbccgp.sys=,,,,,,x,,,,,,4
-usbd.sys=,,,,,,x,,,,,,4
-usbhub.sys=,,,,,,x,,,,,,4
-usbuhci.sys=,,,,,,x,,,,,,4
-usbohci.sys=,,,,,,x,,,,,,4
-usbehci.sys=,,,,,,x,,,,,,4
-usbstor.sys=,,,,,,x,,,,,,4
-kbdhid.sys=,,,,,,,,,,,,4
-kbdclass.sys=,,,,,,x,,,,,,4
-l_intl.nls=,,,,,,,,,,,,2
-ntfs.sys=,,,,,,,,,,,,4
-pci.sys=,,,,,,,,,,,,4
-scsiport.sys=,,,,,,x,,,,,,4
-fastfat.sys=,,,,,,x,,,,,,4
-ramdisk.sys=,,,,,,x,,,,,,4
-ext2fs.sys=,,,,,,x,,,,,,4
-classpnp.sys=,,,,,,,,,,,,4
-pciide.sys=,,,,,,,,,,,,4
-pciidex.sys=,,,,,,,,,,,,4
-pcix.sys=,,,,,,,,,,,,4
-pcmcia.sys=,,,,,,,,,,,,4
-swenum.sys=,,,,,,,,,,,,4
-ntdll.dll=,,,,,,,,,,,,2
+acpi.sys = 1,,,,,,,4,1,,,1,4
+nmidebug.sys = 1,,,,,,x,4,,,,1,4
+sacdrv.sys = 1,,,,,,x,4,,,,1,4
+uniata.sys = 1,,,,,,x,4,,,,1,4
+buslogic.sys = 1,,,,,,x,4,,,,1,4
+storahci.sys = 1,,,,,,x,4,,,,1,4
+blue.sys = 1,,,,,,x,4,,,,1,4
+vgafonts.cab = 1,,,,,,,1,,,,1,1
+bootvid.dll = 1,,,,,,,2,,,,1,2
+c_437.nls = 1,,,,,,,2,,,,1,2
+c_1252.nls = 1,,,,,,,2,,,,1,2
+cdfs.sys = 1,,,,,,x,4,,,,1,4
+cdrom.sys = 1,,,,,,x,4,,,,1,4
+class2.sys = 1,,,,,,x,4,,,,1,4
+isapnp.sys = 1,,,,,,,4,,,,1,4
+kdcom.dll = 1,,,,,,,2,,,,1,2
+kdvbox.dll = 1,,,,,,,2,,,,1,2
+disk.sys = 1,,,,,,x,4,,,,1,4
+floppy.sys = 1,,,,,,x,4,,,,1,4
+i8042prt.sys = 1,,,,,,,4,,,,1,4
+hidclass.sys = 1,,,,,,,4,,,,1,4
+hidparse.sys = 1,,,,,,,4,,,,1,4
+hidusb.sys = 1,,,,,,,4,,,,1,4
+usbccgp.sys = 1,,,,,,x,4,,,,1,4
+usbd.sys = 1,,,,,,x,4,,,,1,4
+usbhub.sys = 1,,,,,,x,4,,,,1,4
+usbuhci.sys = 1,,,,,,x,4,,,,1,4
+usbohci.sys = 1,,,,,,x,4,,,,1,4
+usbehci.sys = 1,,,,,,x,4,,,,1,4
+usbstor.sys = 1,,,,,,x,4,,,,1,4
+kbdhid.sys = 1,,,,,,,4,,,,1,4
+kbdclass.sys = 1,,,,,,x,4,,,,1,4
+l_intl.nls = 1,,,,,,,2,,,,1,2
+pci.sys = 1,,,,,,,4,,,,1,4
+scsiport.sys = 1,,,,,,x,4,,,,1,4
+storport.sys = 1,,,,,,x,4,,,,1,4
+fastfat.sys = 1,,,,,,x,4,,,,1,4
+btrfs.sys = 1,,,,,,x,4,,,,1,4
+ramdisk.sys = 1,,,,,,x,4,,,,1,4
+classpnp.sys = 1,,,,,,,4,,,,1,4
+pciide.sys = 1,,,,,,,4,,,,1,4
+pciidex.sys = 1,,,,,,,4,,,,1,4
+pcix.sys = 1,,,,,,,4,,,,1,4
+pcmcia.sys = 1,,,,,,,4,,,,1,4
+swenum.sys = 1,,,,,,,4,,,,1,4
+ntdll.dll = 1,,,,,,,2,,,,1,2
+wmilib.sys = 1,,,,,,,4,,,,1,4
+ksecdd.sys = 1,,,,,,,4,,,,1,4
+mountmgr.sys = 1,,,,,,x,4,,,,1,4
+
+[SourceDisksFiles.x86]
+
+[SourceDisksFiles.amd64]
+
+;
+; The [SystemPartitionFiles] section lists all the files
+; that should be installed in the System Partition.
+;
+[SystemPartitionFiles]
[HardwareIdsDatabase]
;*PNP0A00 = isapnp
PCI\CC_0104 = uniata
PCI\CC_0105 = uniata
PCI\CC_0106 = uniata
+;PCI\CC_0106 = storahci
*PNP0600 = uniata
;USB\CLASS_09 = usbhub
USB\ROOT_HUB = usbhub
PCI\CC_0C0310 = usbohci
PCI\CC_0C0320 = usbehci
USB\Class_08&SubClass_06&Prot_50 = usbstor
-HID_DEVICE_SYSTEM_KEYBOARD = kbdhid
+HID_DEVICE_SYSTEM_KEYBOARD = kbdhid,{4D36E96B-E325-11CE-BFC1-08002BE10318}
USB\COMPOSITE = usbccgp
GenDisk = disk
USB\Class_03 = hidusb
GENERIC_HID_DEVICE = hidusb
-*PNP0303 = i8042prt
+*PNP0303 = i8042prt,{4D36E96B-E325-11CE-BFC1-08002BE10318}
+ROOT\SWENUM = swenum
[BootBusExtenders.Load]
acpi = acpi.sys
[SCSI.Load]
uniata = uniata.sys
buslogic = buslogic.sys
+storahci = storahci.sys
disk = disk.sys
[Cabinets]
[Computer]
pci_up = "Standard PC Uniprocessor"
-pci_mp = "Standard PC Multiprocessor"
+;pci_mp = "Standard PC Multiprocessor"
acpi_up = "ACPI PC Uniprocessor"
-acpi_mp = "ACPI PC Multiprocessor"
+;acpi_mp = "ACPI PC Multiprocessor"
[Map.Computer]
;<id> = <pnp id string>
pci_up = "PC UP"
-pci_mp = "PC MP"
+;pci_mp = "PC MP"
acpi_up = "ACPI UP"
-acpi_mp = "ACPI MP"
+;acpi_mp = "ACPI MP"
[Files.pci_up]
-ntoskrnl.exe=,,,,,,,,,,,,2
-hal.dll=,,,,,,,,,,,,2
+ntoskrnl.exe = 1,,,,,,,2,,,,1,2
+hal.dll = 1,,,,,,,2,,,,1,2
-[Files.pci_mp]
-ntkrnlmp.exe=,,,,,,,,,,ntoskrnl.exe,,2
-halmps.dll=,,,,,,,,,,hal.dll,,2
+;[Files.pci_mp]
+;ntkrnlmp.exe = 1,,,,,,,2,,,ntoskrnl.exe,1,2
+;halmps.dll = 1,,,,,,,2,,,hal.dll,1,2
[Files.acpi_up]
-ntoskrnl.exe=,,,,,,,,,,,,2
-halacpi.dll=,,,,,,,,,,hal.dll,,2
+ntoskrnl.exe = 1,,,,,,,2,,,,1,2
+halacpi.dll = 1,,,,,,,2,,,hal.dll,1,2
-[Files.acpi_mp]
-ntkrnlmp.exe=,,,,,,,,,,ntoskrnl.exe,,2
-halacpi.dll=,,,,,,,,,,hal.dll,,2
+;[Files.acpi_mp]
+;ntkrnlmp.exe = 1,,,,,,,2,,,ntoskrnl.exe,1,2
+;halacpi.dll = 1,,,,,,,2,,,hal.dll,1,2
[Display]
-;<id> = <user friendly name>,<spare>,<service key name>,<hight>,<width>,<bpp>
-vga = "VGA Display (640x480x4)",,Vga,640,480,4
-vbe_640x480x8 = "VESA Display (640x480x8)",,VBE,640,480,8
-vbe_640x480x16 = "VESA Display (640x480x16)",,VBE,640,480,16
-vbe_640x480x24 = "VESA Display (640x480x24)",,VBE,640,480,24
-vbe_640x480x32 = "VESA Display (640x480x32)",,VBE,640,480,32
-vbe_800x600x8 = "VESA Display (800x600x8)",,VBE,800,600,8
-vbe = "VESA Display (800x600x16)",,VBE,800,600,16
-vbe_800x600x24 = "VESA Display (800x600x24)",,VBE,800,600,24
-vbe_800x600x32 = "VESA Display (800x600x32)",,VBE,800,600,32
-vbe_1024x768x8 = "VESA Display (1024x768x8)",,VBE,1024,768,8
-vbe_1024x768x16 = "VESA Display (1024x768x16)",,VBE,1024,768,16
-vbe_1024x768x24 = "VESA Display (1024x768x24)",,VBE,1024,768,24
-vbe_1024x768x32 = "VESA Display (1024x768x32)",,VBE,1024,768,32
-vbe_1152x864x8 = "VESA Display (1152x864x8)",,VBE,1152,864,8
-vbe_1152x864x16 = "VESA Display (1152x864x16)",,VBE,1152,864,16
-vbe_1152x864x24 = "VESA Display (1152x864x24)",,VBE,1152,864,24
-vbe_1152x864x32 = "VESA Display (1152x864x32)",,VBE,1152,864,32
-vbe_1280x1024x8 = "VESA Display (1280x1024x8)",,VBE,1280,1024,8
+;<id> = <user friendly name>,<spare>,<service key name>,<height>,<width>,<bpp>
+vga = "VGA Display (640x480x4)",,Vga,640,480,4
+vbe_640x480x8 = "VESA Display (640x480x8)",,VBE,640,480,8
+vbe_640x480x16 = "VESA Display (640x480x16)",,VBE,640,480,16
+vbe_640x480x24 = "VESA Display (640x480x24)",,VBE,640,480,24
+vbe_640x480x32 = "VESA Display (640x480x32)",,VBE,640,480,32
+vbe_800x600x8 = "VESA Display (800x600x8)",,VBE,800,600,8
+vbe_800x600x16 = "VESA Display (800x600x16)",,VBE,800,600,16
+vbe_800x600x24 = "VESA Display (800x600x24)",,VBE,800,600,24
+vbe = "VESA Display (800x600x32)",,VBE,800,600,32
+vbe_1024x768x8 = "VESA Display (1024x768x8)",,VBE,1024,768,8
+vbe_1024x768x16 = "VESA Display (1024x768x16)",,VBE,1024,768,16
+vbe_1024x768x24 = "VESA Display (1024x768x24)",,VBE,1024,768,24
+vbe_1024x768x32 = "VESA Display (1024x768x32)",,VBE,1024,768,32
+vbe_1152x864x8 = "VESA Display (1152x864x8)",,VBE,1152,864,8
+vbe_1152x864x16 = "VESA Display (1152x864x16)",,VBE,1152,864,16
+vbe_1152x864x24 = "VESA Display (1152x864x24)",,VBE,1152,864,24
+vbe_1152x864x32 = "VESA Display (1152x864x32)",,VBE,1152,864,32
+vbe_1280x1024x8 = "VESA Display (1280x1024x8)",,VBE,1280,1024,8
vbe_1280x1024x16 = "VESA Display (1280x1024x16)",,VBE,1280,1024,16
vbe_1280x1024x24 = "VESA Display (1280x1024x24)",,VBE,1280,1024,24
vbe_1280x1024x32 = "VESA Display (1280x1024x32)",,VBE,1280,1024,32
-vbe_1600x1200x8 = "VESA Display (1600x1200x8)",,VBE,1600,1200,8
+vbe_1600x1200x8 = "VESA Display (1600x1200x8)",,VBE,1600,1200,8
vbe_1600x1200x16 = "VESA Display (1600x1200x16)",,VBE,1600,1200,16
vbe_1600x1200x24 = "VESA Display (1600x1200x24)",,VBE,1600,1200,24
vbe_1600x1200x32 = "VESA Display (1600x1200x32)",,VBE,1600,1200,32
0000042C = "Azeri (Latin)"
0000042D = "Basque"
00000423 = "Belarusian"
-;00000445 = "Bengali"
+00000845 = "Bengali (Bangladesh)"
+00000445 = "Bengali (India)"
00000402 = "Bulgarian"
;00000455 = "Burmese"
00000403 = "Catalan"
00000408 = "Greek"
;00000447 = "Gujarati (India)"
0000040D = "Hebrew"
-;00000439 = "Hindi"
+00000439 = "Hindi"
0000040E = "Hungarian"
0000040F = "Icelandic"
00000421 = "Indonesian"
00000427 = "Lithuanian"
0000042F = "FYRO Macedonian"
;0000083E = "Malay (Brunei Darussalam)"
-;0000043E = "Malay (Malaysia)"
+0000043E = "Malay (Malaysia)"
;0000044E = "Marathi"
;00000450 = "Mongolian (Mongolia)"
00000414 = "Norwegian (Bokmal)"
00000809 = "English (United Kingdom)"
00000409 = "English (USA)"
00010409 = "English (USA-Dvorak)"
+0000048F = "Esperanto"
00000425 = "Estonian"
0000040B = "Finnish"
0000080C = "French (Belgium)"
0000044C = kbdinmal.dll
0000044D = kbdinasa.dll
00000455 = kbdbur.dll
+0000048F = kbdeo.dll
[HiveInfs.Install]
-AddReg=hivecls.inf,AddReg
-AddReg=hivedef.inf,AddReg
-AddReg=hivesft.inf,AddReg
-AddReg=hivesys.inf,AddReg
+; Called "HiveInfs.Fresh" on Windows
+AddReg = caroots.inf,AddReg
+AddReg = registry.inf,AddReg
+
+[HiveInfs.Upgrade]
+DelReg = registry.inf,DelReg
+AddReg = registry.inf,AddReg
; EOF