{
/* Not used in the driver yet */
case 1:
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
break;
/* Not used in the driver yet */
case 2:
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
break;
/* A drain request */
IN OUT PDEVICE_RELATIONS *pDeviceRelations)
{
/* Not yet implemented */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
+ return STATUS_NOT_IMPLEMENTED;
}
NTSTATUS
(ExIsProcessorFeaturePresent(PF_PAE_ENABLED)))
{
/* Have not tested this on eVb's machine yet */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
}
/* Check if the requirements are actually the zero list */
CapPtr = PciData->u.type0.CapabilitiesPtr;
}
- /* Make sure the pointer is spec-aligned and located, and save it */
- DPRINT1("Device has capabilities at: %lx\n", CapPtr);
- ASSERT(((CapPtr & 0x3) == 0) && (CapPtr >= PCI_COMMON_HDR_LENGTH));
- PdoExtension->CapabilitiesPtr = CapPtr;
-
- /* Check for PCI-to-PCI Bridges and AGP bridges */
- if ((PdoExtension->BaseClass == PCI_CLASS_BRIDGE_DEV) &&
- ((PdoExtension->SubClass == PCI_SUBCLASS_BR_HOST) ||
- (PdoExtension->SubClass == PCI_SUBCLASS_BR_PCI_TO_PCI)))
+ /* Skip garbage capabilities pointer */
+ if (((CapPtr & 0x3) != 0) || (CapPtr < PCI_COMMON_HDR_LENGTH))
{
- /* Query either the raw AGP capabilitity, or the Target AGP one */
- TargetAgpCapabilityId = (PdoExtension->SubClass ==
- PCI_SUBCLASS_BR_PCI_TO_PCI) ?
- PCI_CAPABILITY_ID_AGP_TARGET :
- PCI_CAPABILITY_ID_AGP;
- if (PciReadDeviceCapability(PdoExtension,
- PdoExtension->CapabilitiesPtr,
- TargetAgpCapabilityId,
- &AgpCapability,
- sizeof(PCI_CAPABILITIES_HEADER)))
- {
- /* AGP target ID was found, store it */
- DPRINT1("AGP ID: %lx\n", TargetAgpCapabilityId);
- PdoExtension->TargetAgpCapabilityId = TargetAgpCapabilityId;
- }
+ /* Report no extended capabilities */
+ PdoExtension->CapabilitiesPtr = 0;
+ PdoExtension->HackFlags |= PCI_HACK_NO_PM_CAPS;
}
-
- /* Check for devices that are known not to have proper power management */
- if (!(PdoExtension->HackFlags & PCI_HACK_NO_PM_CAPS))
+ else
{
- /* Query if this device supports power management */
- if (!PciReadDeviceCapability(PdoExtension,
- PdoExtension->CapabilitiesPtr,
- PCI_CAPABILITY_ID_POWER_MANAGEMENT,
- &PowerCapabilities.Header,
- sizeof(PCI_PM_CAPABILITY)))
+ DPRINT1("Device has capabilities at: %lx\n", CapPtr);
+ PdoExtension->CapabilitiesPtr = CapPtr;
+
+ /* Check for PCI-to-PCI Bridges and AGP bridges */
+ if ((PdoExtension->BaseClass == PCI_CLASS_BRIDGE_DEV) &&
+ ((PdoExtension->SubClass == PCI_SUBCLASS_BR_HOST) ||
+ (PdoExtension->SubClass == PCI_SUBCLASS_BR_PCI_TO_PCI)))
{
- /* No power management, so act as if it had the hackflag set */
- DPRINT1("No PM caps, disabling PM\n");
- PdoExtension->HackFlags |= PCI_HACK_NO_PM_CAPS;
+ /* Query either the raw AGP capabilitity, or the Target AGP one */
+ TargetAgpCapabilityId = (PdoExtension->SubClass ==
+ PCI_SUBCLASS_BR_PCI_TO_PCI) ?
+ PCI_CAPABILITY_ID_AGP_TARGET :
+ PCI_CAPABILITY_ID_AGP;
+ if (PciReadDeviceCapability(PdoExtension,
+ PdoExtension->CapabilitiesPtr,
+ TargetAgpCapabilityId,
+ &AgpCapability,
+ sizeof(PCI_CAPABILITIES_HEADER)))
+ {
+ /* AGP target ID was found, store it */
+ DPRINT1("AGP ID: %lx\n", TargetAgpCapabilityId);
+ PdoExtension->TargetAgpCapabilityId = TargetAgpCapabilityId;
+ }
}
- else
+
+ /* Check for devices that are known not to have proper power management */
+ if (!(PdoExtension->HackFlags & PCI_HACK_NO_PM_CAPS))
{
- /* Otherwise, pick the highest wake level that is supported */
- WakeLevel = PowerDeviceUnspecified;
- if (PowerCapabilities.PMC.Capabilities.Support.PMED0)
- WakeLevel = PowerDeviceD0;
- if (PowerCapabilities.PMC.Capabilities.Support.PMED1)
- WakeLevel = PowerDeviceD1;
- if (PowerCapabilities.PMC.Capabilities.Support.PMED2)
- WakeLevel = PowerDeviceD2;
- if (PowerCapabilities.PMC.Capabilities.Support.PMED3Hot)
- WakeLevel = PowerDeviceD3;
- if (PowerCapabilities.PMC.Capabilities.Support.PMED3Cold)
- WakeLevel = PowerDeviceD3;
- PdoExtension->PowerState.DeviceWakeLevel = WakeLevel;
-
- /* Convert the PCI power state to the NT power state */
- PdoExtension->PowerState.CurrentDeviceState =
+ /* Query if this device supports power management */
+ if (!PciReadDeviceCapability(PdoExtension,
+ PdoExtension->CapabilitiesPtr,
+ PCI_CAPABILITY_ID_POWER_MANAGEMENT,
+ &PowerCapabilities.Header,
+ sizeof(PCI_PM_CAPABILITY)))
+ {
+ /* No power management, so act as if it had the hackflag set */
+ DPRINT1("No PM caps, disabling PM\n");
+ PdoExtension->HackFlags |= PCI_HACK_NO_PM_CAPS;
+ }
+ else
+ {
+ /* Otherwise, pick the highest wake level that is supported */
+ WakeLevel = PowerDeviceUnspecified;
+ if (PowerCapabilities.PMC.Capabilities.Support.PMED0)
+ WakeLevel = PowerDeviceD0;
+ if (PowerCapabilities.PMC.Capabilities.Support.PMED1)
+ WakeLevel = PowerDeviceD1;
+ if (PowerCapabilities.PMC.Capabilities.Support.PMED2)
+ WakeLevel = PowerDeviceD2;
+ if (PowerCapabilities.PMC.Capabilities.Support.PMED3Hot)
+ WakeLevel = PowerDeviceD3;
+ if (PowerCapabilities.PMC.Capabilities.Support.PMED3Cold)
+ WakeLevel = PowerDeviceD3;
+ PdoExtension->PowerState.DeviceWakeLevel = WakeLevel;
+
+ /* Convert the PCI power state to the NT power state */
+ PdoExtension->PowerState.CurrentDeviceState =
PowerCapabilities.PMCSR.ControlStatus.PowerState + 1;
- /* Save all the power capabilities */
- PdoExtension->PowerCapabilities = PowerCapabilities.PMC.Capabilities;
- DPRINT1("PM Caps Found! Wake Level: %d Power State: %d\n",
- WakeLevel, PdoExtension->PowerState.CurrentDeviceState);
+ /* Save all the power capabilities */
+ PdoExtension->PowerCapabilities = PowerCapabilities.PMC.Capabilities;
+ DPRINT1("PM Caps Found! Wake Level: %d Power State: %d\n",
+ WakeLevel, PdoExtension->PowerState.CurrentDeviceState);
+ }
}
}
}
if (!PCI_IS_ROOT_FDO(DeviceExtension))
{
/* Not really handling this year */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
/* Check for PCI bridges with the ISA bit set, or required */
if ((PdoExtension) &&
(PdoExtension->Dependent.type1.IsaBitSet)))
{
/* We'll need to do some legacy support */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
}
}
else
if (PdoExtension->Dependent.type1.VgaBitSet)
{
/* Again, some more legacy support we'll have to do */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
}
}
}
if (PciAssignBusNumbers)
{
/* Not yet supported */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
}
}
sizeof(UCHAR));
if (SecondaryBus != PdoExtension->Dependent.type1.SecondaryBus)
{
- DPRINT1("PCI: Bus numbers have been changed! Restoring originals.\n");
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK("PCI: Bus numbers have been changed! Restoring originals.\n");
}
}
if (WdTable)
{
/* Check if this PCI device is the ACPI Watchdog Device... */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
}
/* Check for non-simple devices */
if (PdoExtension)
{
/* Rescan scenarios are not yet implemented */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
}
/* Bus processing will need to happen */
{
/* Reference it and add it to the array */
DeviceObject = PdoExtension->PhysicalDeviceObject;
- ObfReferenceObject(DeviceObject);
+ ObReferenceObject(DeviceObject);
*ObjectArray++ = DeviceObject;
}
(FdoExtension->HotPlugParameters.Acquired))
{
/* Don't have hotplug devices to test with yet, QEMU 0.14 should */
- UNIMPLEMENTED;
- while (TRUE);
+ UNIMPLEMENTED_DBGBREAK();
}
/* Locate the correct resource configurator for this type of device */
projects / reactos.git / blobdiff