NTSTATUS PnpStop(void);
NTSTATUS HandlePower(PIRP Irp);
NTSTATUS GetDeviceDetails(PUSHORT VendorId, PUSHORT DeviceId, PULONG NumberOfPorts, PULONG Speed);
+ NTSTATUS GetBulkHeadEndpointDescriptor(struct _OHCI_ENDPOINT_DESCRIPTOR ** OutDescriptor);
+ NTSTATUS GetControlHeadEndpointDescriptor(struct _OHCI_ENDPOINT_DESCRIPTOR ** OutDescriptor);
+ NTSTATUS GetInterruptEndpointDescriptors(struct _OHCI_ENDPOINT_DESCRIPTOR *** OutDescriptor);
+ NTSTATUS GetIsochronousHeadEndpointDescriptor(struct _OHCI_ENDPOINT_DESCRIPTOR ** OutDescriptor);
+ VOID HeadEndpointDescriptorModified(ULONG HeadType);
+
+
NTSTATUS GetDMA(OUT struct IDMAMemoryManager **m_DmaManager);
NTSTATUS GetUSBQueue(OUT struct IUSBQueue **OutUsbQueue);
KIRQL AcquireDeviceLock(void);
VOID ReleaseDeviceLock(KIRQL OldLevel);
+ virtual VOID GetCurrentFrameNumber(PULONG FrameNumber);
// local
BOOLEAN InterruptService();
NTSTATUS InitializeController();
PHYSICAL_ADDRESS m_HCCAPhysicalAddress; // hcca physical address
POHCI_ENDPOINT_DESCRIPTOR m_ControlEndpointDescriptor; // dummy control endpoint descriptor
POHCI_ENDPOINT_DESCRIPTOR m_BulkEndpointDescriptor; // dummy control endpoint descriptor
- POHCI_ENDPOINT_DESCRIPTOR m_IsoEndpointDescriptor; // iso endpoint descriptor
+ POHCI_ENDPOINT_DESCRIPTOR m_IsoEndpointDescriptor; // iso endpoint descriptor
POHCI_ENDPOINT_DESCRIPTOR m_InterruptEndpoints[OHCI_STATIC_ENDPOINT_COUNT]; // endpoints for interrupt / iso transfers
ULONG m_NumberOfPorts; // number of ports
+ OHCI_PORT_STATUS m_PortStatus[OHCI_MAX_PORT_COUNT]; // port change status
PDMAMEMORYMANAGER m_MemoryManager; // memory manager
HD_INIT_CALLBACK* m_SCECallBack; // status change callback routine
PVOID m_SCEContext; // status change callback routine context
- BOOLEAN m_DoorBellRingInProgress; // door bell ring in progress
WORK_QUEUE_ITEM m_StatusChangeWorkItem; // work item for status change callback
ULONG m_SyncFramePhysAddr; // periodic frame list physical address
+ ULONG m_IntervalValue; // periodic interval value
};
//=================================================================================================
}
//
- // Initialize the UsbQueue now that we have an AdapterObject.
+ // initializes the controller
//
- Status = m_UsbQueue->Initialize(PUSBHARDWAREDEVICE(this), m_Adapter, m_MemoryManager, NULL);
+ Status = InitializeController();
if (!NT_SUCCESS(Status))
{
- DPRINT1("Failed to Initialize the UsbQueue\n");
+ DPRINT1("Failed to Initialize the controller \n");
+ ASSERT(FALSE);
return Status;
}
//
- // initializes the controller
+ // Initialize the UsbQueue now that we have an AdapterObject.
//
- Status = InitializeController();
+ Status = m_UsbQueue->Initialize(PUSBHARDWAREDEVICE(this), m_Adapter, m_MemoryManager, NULL);
if (!NT_SUCCESS(Status))
{
- DPRINT1("Failed to Initialize the controller \n");
- ASSERT(FALSE);
+ DPRINT1("Failed to Initialize the UsbQueue\n");
return Status;
}
NTSTATUS
CUSBHardwareDevice::StartController(void)
{
- ULONG Control, NumberOfPorts, Index, Descriptor;
-
- //
- // first write address of HCCA
- //
- WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_HCCA_OFFSET), m_HCCAPhysicalAddress.LowPart);
+ ULONG Control, NumberOfPorts, Index, Descriptor, FrameInterval, Periodic;
//
// lets write physical address of dummy control endpoint descriptor
WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_BULK_HEAD_ED_OFFSET), m_BulkEndpointDescriptor->PhysicalAddress.LowPart);
//
- // read control register
+ // get frame interval
//
- Control = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET));
+ FrameInterval = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_FRAME_INTERVAL_OFFSET));
+ FrameInterval = ((FrameInterval & OHCI_FRAME_INTERVAL_TOGGLE) ^ OHCI_FRAME_INTERVAL_TOGGLE);
+ DPRINT1("FrameInterval %x IntervalValue %x\n", FrameInterval, m_IntervalValue);
+ FrameInterval |= OHCI_FSMPS(m_IntervalValue) | m_IntervalValue;
+ DPRINT1("FrameInterval %x\n", FrameInterval);
//
- // remove flags
- //
- Control &= ~(OHCI_CONTROL_BULK_SERVICE_RATIO_MASK | OHCI_ENABLE_LIST | OHCI_HC_FUNCTIONAL_STATE_MASK | OHCI_INTERRUPT_ROUTING);
+ // write frame interval
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_FRAME_INTERVAL_OFFSET), FrameInterval);
+
+ //
+ // write address of HCCA
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_HCCA_OFFSET), m_HCCAPhysicalAddress.LowPart);
+
+ //
+ // now enable the interrupts
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_INTERRUPT_ENABLE_OFFSET), OHCI_NORMAL_INTERRUPTS | OHCI_MASTER_INTERRUPT_ENABLE);
+
+ //
+ // enable all queues
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET), OHCI_ENABLE_LIST);
//
- // set command status flags
+ // 90 % periodic
//
- Control |= OHCI_ENABLE_LIST | OHCI_CONTROL_BULK_RATIO_1_4 | OHCI_HC_FUNCTIONAL_STATE_OPERATIONAL;
+ Periodic = OHCI_PERIODIC(m_IntervalValue);
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_PERIODIC_START_OFFSET), Periodic);
+ DPRINT1("Periodic Start %x\n", Periodic);
//
- // now start the controller
+ // start the controller
//
- WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET), Control);
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET), OHCI_ENABLE_LIST | OHCI_CONTROL_BULK_RATIO_1_4 | OHCI_HC_FUNCTIONAL_STATE_OPERATIONAL);
//
// wait a bit
// assert that the controller has been started
//
ASSERT((Control & OHCI_HC_FUNCTIONAL_STATE_MASK) == OHCI_HC_FUNCTIONAL_STATE_OPERATIONAL);
+ ASSERT((Control & OHCI_ENABLE_LIST) == OHCI_ENABLE_LIST);
+ DPRINT1("Control %x\n", Control);
+
+ //
+ // read descriptor
+ //
+ Descriptor = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_DESCRIPTOR_A_OFFSET));
+
+ //
+ // no over current protection
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_DESCRIPTOR_A_OFFSET), Descriptor | OHCI_RH_NO_OVER_CURRENT_PROTECTION);
+
+ //
+ // enable power on all ports
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_STATUS_OFFSET), OHCI_RH_LOCAL_POWER_STATUS_CHANGE);
+
+ //
+ // wait a bit
+ //
+ KeStallExecutionProcessor(10);
+
+ //
+ // write descriptor
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_DESCRIPTOR_A_OFFSET), Descriptor);
//
// retrieve number of ports
DPRINT1("NumberOfPorts %lu\n", m_NumberOfPorts);
- //
- // now enable the interrupts
- //
- WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_INTERRUPT_ENABLE_OFFSET), OHCI_NORMAL_INTERRUPTS | OHCI_MASTER_INTERRUPT_ENABLE);
-
//
// done
//
return STATUS_SUCCESS;
}
+NTSTATUS
+CUSBHardwareDevice::GetBulkHeadEndpointDescriptor(
+ struct _OHCI_ENDPOINT_DESCRIPTOR ** OutDescriptor)
+{
+ *OutDescriptor = m_BulkEndpointDescriptor;
+ return STATUS_SUCCESS;
+}
+
+NTSTATUS
+CUSBHardwareDevice::GetInterruptEndpointDescriptors(
+ struct _OHCI_ENDPOINT_DESCRIPTOR *** OutDescriptor)
+{
+ *OutDescriptor = m_InterruptEndpoints;
+ return STATUS_SUCCESS;
+}
+
+NTSTATUS
+CUSBHardwareDevice::GetIsochronousHeadEndpointDescriptor(
+ struct _OHCI_ENDPOINT_DESCRIPTOR ** OutDescriptor)
+{
+ //
+ // get descriptor
+ //
+ *OutDescriptor = m_IsoEndpointDescriptor;
+ return STATUS_SUCCESS;
+}
+
+VOID
+CUSBHardwareDevice::HeadEndpointDescriptorModified(
+ ULONG Type)
+{
+ ULONG Value = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_COMMAND_STATUS_OFFSET));
+
+ if (Type == USB_ENDPOINT_TYPE_CONTROL)
+ {
+ //
+ // notify controller
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_COMMAND_STATUS_OFFSET), Value | OHCI_CONTROL_LIST_FILLED);
+ }
+ else if (Type == USB_ENDPOINT_TYPE_BULK)
+ {
+ //
+ // notify controller
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_COMMAND_STATUS_OFFSET), Value | OHCI_BULK_LIST_FILLED);
+ }
+}
+
+NTSTATUS
+CUSBHardwareDevice::GetControlHeadEndpointDescriptor(
+ struct _OHCI_ENDPOINT_DESCRIPTOR ** OutDescriptor)
+{
+ *OutDescriptor = m_ControlEndpointDescriptor;
+ return STATUS_SUCCESS;
+}
+
NTSTATUS
CUSBHardwareDevice::InitializeController()
{
//
m_InterruptEndpoints[0]->NextPhysicalEndpoint = m_IsoEndpointDescriptor->PhysicalAddress.LowPart;
+ //
+ // set iso endpoint type
+ //
+ m_IsoEndpointDescriptor->Flags |= OHCI_ENDPOINT_ISOCHRONOUS_FORMAT;
+
//
// done
//
NTSTATUS
CUSBHardwareDevice::StopController(void)
{
- ULONG Control, Reset;
- ULONG Index;
+ ULONG Control, Reset, Status;
+ ULONG Index, FrameInterval;
//
- // first turn off all interrupts
+ // alignment check
//
- WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_INTERRUPT_DISABLE_OFFSET), OHCI_ALL_INTERRUPTS);
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_HCCA_OFFSET, 0xFFFFFFFF);
+ Control = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_HCCA_OFFSET));
+ DPRINT1("HcHCCA Alignment %x\n", Control);
+ ASSERT((Control & 0xFFFFFFF0) == 0xFFFFFFF0);
//
// check context
//
Control = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET));
- //
- // FIXME: support routing
- //
- ASSERT((Control & OHCI_INTERRUPT_ROUTING) == 0);
+ if ((Control & OHCI_INTERRUPT_ROUTING))
+ {
+ //
+ // read command status
+ //
+ Status = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_COMMAND_STATUS_OFFSET));
- //
- // have a break
- //
- KeStallExecutionProcessor(100);
+ //
+ // change ownership
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_COMMAND_STATUS_OFFSET), Status | OHCI_OWNERSHIP_CHANGE_REQUEST);
+ for(Index = 0; Index < 100; Index++)
+ {
+ //
+ // wait a bit
+ //
+ KeStallExecutionProcessor(100);
+
+ //
+ // check control
+ //
+ Control = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET));
+ if (!(Control & OHCI_INTERRUPT_ROUTING))
+ {
+ //
+ // acquired ownership
+ //
+ break;
+ }
+ }
+
+ //
+ // if the ownership is still not changed, perform reset
+ //
+ if (Control & OHCI_INTERRUPT_ROUTING)
+ {
+ DPRINT1("SMM not responding\n");
+ }
+ else
+ {
+ DPRINT1("SMM has given up ownership\n");
+ }
+ }
+ else
+ {
+ //
+ // read contents of control register
+ //
+ Control = (READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET)) & OHCI_HC_FUNCTIONAL_STATE_MASK);
+ DPRINT1("Controller State %x\n", Control);
+
+ if (Control != OHCI_HC_FUNCTIONAL_STATE_RESET)
+ {
+ //
+ // OHCI 5.1.1.3.4, no SMM, BIOS active
+ //
+ if (Control != OHCI_HC_FUNCTIONAL_STATE_OPERATIONAL)
+ {
+ //
+ // lets resume
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET), OHCI_HC_FUNCTIONAL_STATE_RESUME);
+ Index = 0;
+ do
+ {
+ //
+ // wait untill its resumed
+ //
+ KeStallExecutionProcessor(10);
+
+ //
+ // check control register
+ //
+ Control = (READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET)) & OHCI_HC_FUNCTIONAL_STATE_MASK);
+ if (Control & OHCI_HC_FUNCTIONAL_STATE_RESUME)
+ {
+ //
+ // it has resumed
+ //
+ break;
+ }
+
+ //
+ // check for time outs
+ //
+ Index++;
+ if(Index > 100)
+ {
+ DPRINT1("Failed to resume controller\n");
+ break;
+ }
+ }while(TRUE);
+ }
+ }
+ else
+ {
+ //
+ // 5.1.1.3.5 OHCI, no SMM, no BIOS
+ //
+ Index = 0;
+
+ //
+ // some controllers also depend on this
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET), OHCI_HC_FUNCTIONAL_STATE_RESET);
+ do
+ {
+ //
+ // wait untill its reset
+ //
+ KeStallExecutionProcessor(10);
+
+ //
+ // check control register
+ //
+ Control = (READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET)) & OHCI_HC_FUNCTIONAL_STATE_MASK);
+ if (Control == OHCI_HC_FUNCTIONAL_STATE_RESET)
+ {
+ //
+ // it has reset
+ //
+ break;
+ }
+
+ //
+ // check for time outs
+ //
+ Index++;
+ if(Index > 100)
+ {
+ DPRINT1("Failed to reset controller\n");
+ break;
+ }
+
+ }while(TRUE);
+ }
+ }
//
- // some controllers also depend on this
+ // read from interval
//
- WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET), OHCI_HC_FUNCTIONAL_STATE_RESET);
+ FrameInterval = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_FRAME_INTERVAL_OFFSET));
//
- // wait a bit
+ // store interval value for later
//
- KeStallExecutionProcessor(100);
+ m_IntervalValue = OHCI_GET_INTERVAL_VALUE(FrameInterval);
+
+ DPRINT1("FrameInterval %x Interval %x\n", FrameInterval, m_IntervalValue);
//
// now reset controller
//
if ((Reset & OHCI_HOST_CONTROLLER_RESET) == 0)
{
+ //
+ // restore the frame interval register
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_FRAME_INTERVAL_OFFSET), FrameInterval);
+
//
// controller completed reset
//
OUT USHORT *PortStatus,
OUT USHORT *PortChange)
{
- UNIMPLEMENTED
+ ULONG Value;
+
+ if (PortId > m_NumberOfPorts)
+ return STATUS_UNSUCCESSFUL;
+
+ // init result variables
*PortStatus = 0;
*PortChange = 0;
+
+ //
+ // read port status
+ //
+ Value = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_PORT_STATUS(PortId)));
+ DPRINT("GetPortStatus PortId %x Value %x\n", PortId, Value);
+
+
+ // connected
+ if (Value & OHCI_RH_PORTSTATUS_CCS)
+ *PortStatus |= USB_PORT_STATUS_CONNECT;
+
+ // did a device connect?
+ if (Value & OHCI_RH_PORTSTATUS_CSC)
+ *PortChange |= USB_PORT_STATUS_CONNECT;
+
+ // port enabled
+ if (Value & OHCI_RH_PORTSTATUS_PES)
+ *PortStatus |= USB_PORT_STATUS_ENABLE;
+
+ // port enabled
+ if (Value & OHCI_RH_PORTSTATUS_PESC)
+ *PortChange |= USB_PORT_STATUS_ENABLE;
+
+ // port suspend
+ if (Value & OHCI_RH_PORTSTATUS_PSS)
+ *PortStatus |= USB_PORT_STATUS_SUSPEND;
+
+ // port suspend
+ if (Value & OHCI_RH_PORTSTATUS_PSSC)
+ *PortChange |= USB_PORT_STATUS_ENABLE;
+
+ // port reset
+ if (Value & OHCI_RH_PORTSTATUS_PSS)
+ *PortStatus |= USB_PORT_STATUS_RESET;
+
+ // port reset
+ if (Value & OHCI_RH_PORTSTATUS_PRSC)
+ *PortChange |= USB_PORT_STATUS_RESET;
+
return STATUS_SUCCESS;
}
ULONG PortId,
ULONG Status)
{
- UNIMPLEMENTED
+ ULONG Value;
+
+ DPRINT("CUSBHardwareDevice::ClearPortStatus PortId %x Feature %x\n", PortId, Status);
+
+ if (PortId > m_NumberOfPorts)
+ return STATUS_UNSUCCESSFUL;
+
+ Value = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_PORT_STATUS(PortId)));
+ KeStallExecutionProcessor(100);
+
+ if (Status == C_PORT_RESET)
+ {
+ do
+ {
+ //
+ // read port status
+ //
+ Value = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_PORT_STATUS(PortId)));
+
+ if ((Value & OHCI_RH_PORTSTATUS_PRS) == 0)
+ {
+ //
+ // reset is complete
+ //
+ break;
+ }
+
+ //
+ // wait a bit
+ //
+ KeStallExecutionProcessor(100);
+
+ //DPRINT1("Value %x Index %lu\n", Value, Index);
+
+ }while(TRUE);
+
+ //
+ // check if reset bit is still set
+ //
+ if (Value & OHCI_RH_PORTSTATUS_PRS)
+ {
+ //
+ // reset failed
+ //
+ DPRINT1("PortId %lu Reset failed\n", PortId);
+ return STATUS_UNSUCCESSFUL;
+ }
+
+ //
+ // sanity checks
+ //
+ ASSERT((Value & OHCI_RH_PORTSTATUS_PRS) == 0);
+ ASSERT((Value & OHCI_RH_PORTSTATUS_PRSC));
+
+ //
+ // clear reset bit complete
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_PORT_STATUS(PortId)), OHCI_RH_PORTSTATUS_PRSC);
+
+ //
+ // read status register
+ //
+ Value = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_PORT_STATUS(PortId)));
+
+ //
+ // reset complete bit should be cleared
+ //
+ ASSERT((Value & OHCI_RH_PORTSTATUS_PRSC) == 0);
+
+ //
+ // update port status
+ //
+ m_PortStatus[PortId].PortChange &= ~USB_PORT_STATUS_RESET;
+
+ //
+ // sanity check
+ //
+ ASSERT((Value & OHCI_RH_PORTSTATUS_PES));
+
+ //
+ // port is enabled
+ //
+ m_PortStatus[PortId].PortStatus |= USB_PORT_STATUS_ENABLE;
+
+ //
+ // re-enable root hub change
+ //
+ Value = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_INTERRUPT_ENABLE_OFFSET));
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_INTERRUPT_ENABLE_OFFSET), Value | OHCI_ROOT_HUB_STATUS_CHANGE);
+
+ }
+
+ if (Status == C_PORT_CONNECTION)
+ {
+ //
+ // clear bit
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_PORT_STATUS(PortId)), OHCI_RH_PORTSTATUS_CSC);
+ m_PortStatus[PortId].PortChange &= ~USB_PORT_STATUS_CONNECT;
+ }
+
+
+
return STATUS_SUCCESS;
}
ULONG PortId,
ULONG Feature)
{
+ ULONG Value;
+
+ DPRINT1("CUSBHardwareDevice::SetPortFeature PortId %x Feature %x\n", PortId, Feature);
+
+ //
+ // read port status
+ //
+ Value = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_PORT_STATUS(PortId)));
+
+
if (Feature == PORT_ENABLE)
{
//
}
else if (Feature == PORT_RESET)
{
+ //
+ // assert
+ //
+ ASSERT((Value & OHCI_RH_PORTSTATUS_CCS));
+
//
// reset port
//
WRITE_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_RH_PORT_STATUS(PortId)), OHCI_RH_PORTSTATUS_PRS);
+ //
+ // wait
+ //
+ KeStallExecutionProcessor(100);
+
+ //
+ // update cached settings
+ //
+ m_PortStatus[PortId].PortChange |= USB_PORT_STATUS_RESET;
+ m_PortStatus[PortId].PortStatus &= ~USB_PORT_STATUS_ENABLE;
+
//
// is there a status change callback
//
return OldLevel;
}
+VOID
+CUSBHardwareDevice::GetCurrentFrameNumber(
+ PULONG FrameNumber)
+{
+ ULONG Control;
+ ULONG Number;
+
+
+ Number = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_FRAME_INTERVAL_NUMBER_OFFSET));
+ DPRINT1("FrameNumberInterval %x Frame %x\n", Number, m_HCCA->CurrentFrameNumber);
+
+ //
+ // remove reserved bits
+ //
+ Number &= 0xFFFF;
+
+ //
+ // store frame number
+ //
+ *FrameNumber = Number;
+
+ //
+ // is the controller started
+ //
+ Control = READ_REGISTER_ULONG((PULONG)((PUCHAR)m_Base + OHCI_CONTROL_OFFSET));
+ ASSERT((Control & OHCI_ENABLE_LIST) == OHCI_ENABLE_LIST);
+
+
+}
VOID
CUSBHardwareDevice::ReleaseDeviceLock(
//
This = (CUSBHardwareDevice*) ServiceContext;
- DPRINT1("InterruptServiceRoutine\n");
+ DPRINT("InterruptServiceRoutine\n");
//
// get done head
//
// head completed
//
- DPRINT1("InterruptServiceRoutine> Done Head completion\n");
-
- //
- // FIXME: handle event
- //
Acknowledge |= OHCI_WRITEBACK_DONE_HEAD;
+ This->m_HCCA->DoneHead = 0;
}
if (Status & OHCI_RESUME_DETECTED)
if (Status & OHCI_UNRECOVERABLE_ERROR)
{
DPRINT1("InterruptServiceRoutine> Controller error\n");
+
//
// halt controller
//
- WRITE_REGISTER_ULONG((PULONG)((PUCHAR)(This->m_Base + OHCI_CONTROL_OFFSET)), OHCI_HC_FUNCTIONAL_STATE_RESET);
+ ASSERT(FALSE);
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)This->m_Base + OHCI_CONTROL_OFFSET), OHCI_HC_FUNCTIONAL_STATE_RESET);
}
if (Status & OHCI_ROOT_HUB_STATUS_CHANGE)
//
// new device has arrived
//
- DPRINT1("InterruptServiceRoutine> New Device arrival\n");
//
// disable interrupt as it will fire untill the port has been reset
//
- WRITE_REGISTER_ULONG((PULONG)((PUCHAR)(This->m_Base + OHCI_INTERRUPT_DISABLE_OFFSET)), OHCI_ROOT_HUB_STATUS_CHANGE);
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)This->m_Base + OHCI_INTERRUPT_DISABLE_OFFSET), OHCI_ROOT_HUB_STATUS_CHANGE);
Acknowledge |= OHCI_ROOT_HUB_STATUS_CHANGE;
}
//
// ack change
//
- WRITE_REGISTER_ULONG((PULONG)((PUCHAR)(This->m_Base + OHCI_INTERRUPT_STATUS_OFFSET)), Acknowledge);
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)This->m_Base + OHCI_INTERRUPT_STATUS_OFFSET), Acknowledge);
}
//
// defer processing
//
- DPRINT1("Status %x\n", Status);
- KeInsertQueueDpc(&This->m_IntDpcObject, This, (PVOID)Status);
+ DPRINT("Status %x Acknowledge %x FrameNumber %x\n", Status, Acknowledge, This->m_HCCA->CurrentFrameNumber);
+ KeInsertQueueDpc(&This->m_IntDpcObject, (PVOID)Status, (PVOID)(DoneHead & ~1));
//
// interrupt handled
IN PVOID SystemArgument2)
{
CUSBHardwareDevice *This;
- ULONG CStatus;
+ ULONG CStatus, Index, PortStatus;
+ ULONG DoneHead;
//
// get parameters
//
- This = (CUSBHardwareDevice*) SystemArgument1;
- CStatus = (ULONG) SystemArgument2;
+ This = (CUSBHardwareDevice*)DeferredContext;
+ CStatus = (ULONG) SystemArgument1;
+ DoneHead = (ULONG)SystemArgument2;
+
+ DPRINT("OhciDefferedRoutine Status %x\n", CStatus);
+
+ if (CStatus & OHCI_WRITEBACK_DONE_HEAD)
+ {
+ //
+ // notify queue of event
+ //
+ This->m_UsbQueue->TransferDescriptorCompletionCallback(DoneHead);
+ }
+ if (CStatus & OHCI_ROOT_HUB_STATUS_CHANGE)
+ {
+ //
+ // device connected, lets check which port
+ //
+ for(Index = 0; Index < This->m_NumberOfPorts; Index++)
+ {
+ //
+ // read port status
+ //
+ PortStatus = READ_REGISTER_ULONG((PULONG)((PUCHAR)This->m_Base + OHCI_RH_PORT_STATUS(Index)));
+
+ //
+ // check if there is a status change
+ //
+ if (PortStatus & OHCI_RH_PORTSTATUS_CSC)
+ {
+ //
+ // did a device connect
+ //
+ if (PortStatus & OHCI_RH_PORTSTATUS_CCS)
+ {
+ //
+ // device connected
+ //
+ DPRINT1("New device arrival at Port %d LowSpeed %x\n", Index, (PortStatus & OHCI_RH_PORTSTATUS_LSDA));
+
+ //
+ // enable port
+ //
+ WRITE_REGISTER_ULONG((PULONG)((PUCHAR)This->m_Base + OHCI_RH_PORT_STATUS(Index)), OHCI_RH_PORTSTATUS_PES);
+
+
+ //
+ // store change
+ //
+ This->m_PortStatus[Index].PortStatus |= USB_PORT_STATUS_CONNECT;
+ This->m_PortStatus[Index].PortChange |= USB_PORT_STATUS_CONNECT;
+
+ if ((PortStatus & OHCI_RH_PORTSTATUS_LSDA))
+ {
+ //
+ // low speed device connected
+ //
+ This->m_PortStatus[Index].PortStatus |= USB_PORT_STATUS_LOW_SPEED;
+ }
+ }
+ else
+ {
+ //
+ // device disconnected
+ //
+ DPRINT1("Device disconnected at Port %x\n", Index);
+
+ //
+ // update port status flags
+ //
+ This->m_PortStatus[Index].PortStatus &= ~USB_PORT_STATUS_LOW_SPEED;
+ This->m_PortStatus[Index].PortStatus &= ~USB_PORT_STATUS_CONNECT;
+ This->m_PortStatus[Index].PortChange |= USB_PORT_STATUS_CONNECT;
+ }
+
+ //
+ // is there a status change callback
+ //
+ if (This->m_SCECallBack != NULL)
+ {
+ //
+ // queue work item for processing
+ //
+ ExQueueWorkItem(&This->m_StatusChangeWorkItem, DelayedWorkQueue);
+ }
+ }
+ }
+ }
}
projects / reactos.git / blobdiff