[CMAKE]

[reactos.git] / hal / halx86 / generic / timer.c

diff --git a/hal/halx86/generic/timer.c b/hal/halx86/generic/timer.c
index 239db03..89d6627 100644 (file)
--- a/hal/halx86/generic/timer.c
+++ b/hal/halx86/generic/timer.c
@@ -14,6 +14,7 @@
 
 /* GLOBALS *******************************************************************/
 
+ULONG HalpPerfCounterCutoff;
 BOOLEAN HalpClockSetMSRate;
 ULONG HalpCurrentTimeIncrement;
 ULONG HalpCurrentRollOver;
@@ -43,6 +44,7 @@ LARGE_INTEGER HalpRolloverTable[15] =
 
 VOID
 NTAPI
+INIT_FUNCTION
 HalpInitializeClock(VOID)
 {
     PKPRCB Prcb = KeGetCurrentPrcb();
@@ -71,34 +73,26 @@ HalpInitializeClock(VOID)
     Flags = __readeflags();
     _disable();
     
-    //
-    // Program the PIT for binary mode
-    //
+    /* Program the PIT for binary mode */
     TimerControl.BcdMode = FALSE;
 
-    //
-    // Program the PIT to generate a normal rate wave (Mode 3) on channel 0.
-    // Channel 0 is used for the IRQ0 clock interval timer, and channel
-    // 1 is used for DRAM refresh.
-    //
-    // Mode 2 gives much better accuracy than Mode 3.
-    //
+    /*
+     * Program the PIT to generate a normal rate wave (Mode 3) on channel 0.
+     * Channel 0 is used for the IRQ0 clock interval timer, and channel
+     * 1 is used for DRAM refresh.
+     *
+     * Mode 2 gives much better accuracy than Mode 3.
+     */
     TimerControl.OperatingMode = PitOperatingMode2;
     TimerControl.Channel = PitChannel0;
     
-    //
-    // Set the access mode that we'll use to program the reload value.
-    //
+    /* Set the access mode that we'll use to program the reload value */
     TimerControl.AccessMode = PitAccessModeLowHigh;
     
-    //
-    // Now write the programming bits
-    //
+    /* Now write the programming bits */
     __outbyte(TIMER_CONTROL_PORT, TimerControl.Bits);
     
-    //
-    // Next we write the reload value for channel 0
-    //
+    /* Next we write the reload value for channel 0 */
     __outbyte(TIMER_CHANNEL0_DATA_PORT, RollOver & 0xFF);
     __outbyte(TIMER_CHANNEL0_DATA_PORT, RollOver >> 8);
 
@@ -109,6 +103,64 @@ HalpInitializeClock(VOID)
     HalpCurrentRollOver = RollOver;
 }
 
+#ifdef _M_IX86
+#ifndef _MINIHAL_
+VOID
+FASTCALL
+HalpClockInterruptHandler(IN PKTRAP_FRAME TrapFrame)
+{
+    KIRQL Irql;
+    
+    /* Enter trap */
+    KiEnterInterruptTrap(TrapFrame);
+    
+    /* Start the interrupt */
+    if (HalBeginSystemInterrupt(CLOCK2_LEVEL, PRIMARY_VECTOR_BASE, &Irql))
+    {
+        /* Update the performance counter */
+        HalpPerfCounter.QuadPart += HalpCurrentRollOver;
+        HalpPerfCounterCutoff = KiEnableTimerWatchdog;
+        
+        /* Check if someone changed the time rate */
+        if (HalpClockSetMSRate)
+        {
+            /* Not yet supported */
+            UNIMPLEMENTED;
+            while (TRUE);
+        }
+        
+        /* Update the system time -- the kernel will exit this trap  */
+        KeUpdateSystemTime(TrapFrame, HalpCurrentTimeIncrement, Irql);
+    }
+    
+    /* Spurious, just end the interrupt */
+    KiEoiHelper(TrapFrame);
+}
+
+VOID
+FASTCALL
+HalpProfileInterruptHandler(IN PKTRAP_FRAME TrapFrame)
+{
+    KIRQL Irql;
+    
+    /* Enter trap */
+    KiEnterInterruptTrap(TrapFrame);
+    
+    /* Start the interrupt */
+    if (HalBeginSystemInterrupt(PROFILE_LEVEL, PRIMARY_VECTOR_BASE + 8, &Irql))
+    {
+        /* Profiling isn't yet enabled */
+        UNIMPLEMENTED;
+        while (TRUE);
+    }
+    
+    /* Spurious, just end the interrupt */
+    KiEoiHelper(TrapFrame);
+}
+#endif
+
+#endif
+
 /* PUBLIC FUNCTIONS ***********************************************************/
 
 /*