-host_gcc = gcc
-host_gpp = g++
-host_ld = ld
-host_ar = ar
-host_objcopy = objcopy
+# Well-known targets:
+#
+# all (default target)
+# This target builds all of ReactOS.
+#
+# module
+# These targets builds a single module. Replace module with the name of
+# the module you want to build.
+#
+# bootcd
+# This target builds an ISO (ReactOS.iso) from which ReactOS can be booted
+# and installed.
+#
+# livecd
+# This target builds an ISO (ReactOS-Live.iso) from which ReactOS can be
+# booted, but not installed.
+#
+# install
+# This target installs all of ReactOS to a location specified by the
+# ROS_INSTALL environment variable.
+#
+# module_install
+# These targets installs a single module to a location specified by the
+# ROS_INSTALL environment variable. Replace module with the name of the
+# module you want to install.
+#
+# clean
+# This target cleans (deletes) all files that are generated when building
+# ReactOS.
+#
+# module_clean
+# These targets cleans (deletes) files that are generated when building a
+# single module. Replace module with the name of the module you want to
+# clean.
+#
+# depends
+# This target does a complete dependency check of the ReactOS codebase.
+# This can require several minutes to complete. If you only need to check
+# dependencies for a single or few modules then you can use the
+# module_depends targets instead. This target can also repair a damaged or
+# missing makefile.auto if needed.
+#
+# module_depends
+# These targets do a dependency check of individual modules. Replace module
+# with the name of the module for which you want to check dependencies.
+# This is faster than the depends target which does a complete dependency
+# check of the ReactOS codebase.
+#
+#
+# Accepted environment variables:
+#
+# ROS_PREFIX
+# This variable specifies the prefix of the MinGW installation. On Windows
+# a prefix is usually not needed, but on linux it is usually "mingw32". If
+# not present and no executable named "gcc" can be found, then the prefix is
+# assumed to be "mingw32". If your gcc is named i386-mingw32-gcc then set
+# ROS_PREFIX to i386-mingw32. Don't include the dash (-) before gcc.
+#
+# ROS_INTERMEDIATE
+# This variable controls where to put intermediate files. Intermediate
+# files are generated files that are needed to generate the final
+# output files. Examples of intermediate files include *.o, *.a, and
+# *.coff. N.B. Don't put a path separator at the end. The variable
+# defaults to .\obj-i386.
+#
+# ROS_OUTPUT
+# This variable controls where to put output files. Output files are
+# generated files that makes up the result of the build process.
+# Examples of output files include *.exe, *.dll, and *.sys. N.B. Don't
+# put a path separator at the end. The variable defaults to .\output-i386.
+#
+# ROS_TEMPORARY
+# This variable controls where to put temporary files. Temporary files
+# are (usually small) generated files that are needed to generate the
+# intermediate or final output files. Examples of temporary files include
+# *.rci (preprocessed .rc files for wrc), *.tmp, and *.exp. N.B. Don't put
+# a path separator at the end. The variable defaults to the current
+# directory.
+#
+# ROS_INSTALL
+# This variable controls where to install output files to when using
+# 'make install'. N.B. Don't put a path separator at the end. The variable
+# defaults to .\reactos.
+#
+# ROS_BUILDMAP
+# This variable controls if map files are to be generated for executable
+# output files. Map files have the extension .map. The value can be either
+# full (to build map files with assembly code), yes (to build map files
+# without source code) or no (to not build any map files). The variable
+# defaults to no.
+#
+# ROS_BUILDNOSTRIP
+# This variable controls if non-symbol-stripped versions are to be built
+# of executable output files. Non-symbol-stripped executable output files
+# have .nostrip added to the filename just before the extension. The value
+# can be either yes (to build non-symbol-stripped versions of executable
+# output files) or no (to not build non-symbol-stripped versions of
+# executable output files). The variable defaults to no.
+#
+# ROS_RBUILDFLAGS
+# Pass parameters to rbuild.
+# -v Be verbose.
+# -c Clean as you go. Delete generated files as soon as they are not needed anymore.
+# -dd Disable automatic dependencies.
+# -dm{module} Check only automatic dependencies for this module.
+# -mi Let make handle creation of install directories. Rbuild will not generate the directories.
+# -ps Generate proxy makefiles in source tree instead of the output tree.
+# -ud Disable compilation units.
+# -r Input XML
+#
+# ROS_AUTOMAKE
+# Alternate name of makefile.auto
+#
+
+# check for versions of make that don't have features we need...
+# the function "eval" is only available in 3.80+, which happens to be the minimum
+# version that has the features we use...
+# THIS CHECK IS BORROWED FROM THE "GMSL" PROJECT, AND IS COVERED BY THE GPL LICENSE
+# YOU CAN FIND OUT MORE ABOUT GMSL - A VERY COOL PROJECT - AT:
+# http://gmsl.sourceforge.net/
+
+__gmsl_have_eval :=
+__gmsl_ignore := $(eval __gmsl_have_eval := T)
+
+ifndef __gmsl_have_eval
+$(error ReactOS's makefiles use GNU Make 3.80+ features, you have $(MAKE_VERSION), you MUST UPGRADE in order to build ReactOS - Sorry)
+endif
+# END of code borrowed from GMSL ( http://gmsl.sourceforge.net/ )
+
+.PHONY: all
+.PHONY: clean
+
+ifeq ($(ROS_AUTOMAKE),)
+ROS_AUTOMAKE=makefile.auto
+endif
+
+all: $(ROS_AUTOMAKE)
+
+
+.SUFFIXES:
+
+ifeq ($(HOST),)
+ifeq ($(word 1,$(shell gcc -dumpmachine)),mingw32)
+ifeq ($(findstring msys,$(shell sh --version 2>nul)),msys)
+export OSTYPE = msys
+HOST=mingw32-linux
+else
+HOST=mingw32-windows
+endif
+else
+HOST=mingw32-linux
+endif
+endif
+
+# Default to half-verbose mode
+ifeq ($(VERBOSE),no)
+ Q = @
+ HALFVERBOSEECHO = no
+ BUILDNO_QUIET = -q
+else
+ifeq ($(VERBOSE),full)
+ Q =
+ HALFVERBOSEECHO = no
+ BUILDNO_QUIET =
+else
+ Q = @
+ HALFVERBOSEECHO = yes
+ BUILDNO_QUIET = -q
+endif
+endif
ifeq ($(HOST),mingw32-linux)
- EXEPREFIX = ./
- EXEPOSTFIX =
- SEP = /
- nmkdir = mkdir -p
- gcc = mingw32-gcc
- gpp = mingw32-g++
- ld = mingw32-ld
- ar = mingw32-ar
- objcopy = mingw32-objcopy
- dlltool = mingw32-dlltool
- windres = mingw32-windres
- rm = rm -f
- cp = cp
+ QUOTE = "
+else
+ QUOTE =
+endif
+ifeq ($(HALFVERBOSEECHO),yes)
+ ECHO_CP =@echo $(QUOTE)[COPY] $@$(QUOTE)
+ ECHO_MKDIR =@echo $(QUOTE)[MKDIR] $@$(QUOTE)
+ ECHO_BUILDNO =@echo $(QUOTE)[BUILDNO] $@$(QUOTE)
+ ECHO_INVOKE =@echo $(QUOTE)[INVOKE] $<$(QUOTE)
+ ECHO_PCH =@echo $(QUOTE)[PCH] $@$(QUOTE)
+ ECHO_CC =@echo $(QUOTE)[CC] $<$(QUOTE)
+ ECHO_GAS =@echo $(QUOTE)[GAS] $<$(QUOTE)
+ ECHO_NASM =@echo $(QUOTE)[NASM] $<$(QUOTE)
+ ECHO_AR =@echo $(QUOTE)[AR] $@$(QUOTE)
+ ECHO_WINEBLD =@echo $(QUOTE)[WINEBLD] $@$(QUOTE)
+ ECHO_WRC =@echo $(QUOTE)[WRC] $@$(QUOTE)
+ ECHO_WIDL =@echo $(QUOTE)[WIDL] $@$(QUOTE)
+ ECHO_BIN2RES =@echo $(QUOTE)[BIN2RES] $<$(QUOTE)
+ ECHO_DLLTOOL =@echo $(QUOTE)[DLLTOOL] $@$(QUOTE)
+ ECHO_LD =@echo $(QUOTE)[LD] $@$(QUOTE)
+ ECHO_NM =@echo $(QUOTE)[NM] $@$(QUOTE)
+ ECHO_OBJDUMP =@echo $(QUOTE)[OBJDUMP] $@$(QUOTE)
+ ECHO_RBUILD =@echo $(QUOTE)[RBUILD] $@$(QUOTE)
+ ECHO_RSYM =@echo $(QUOTE)[RSYM] $@$(QUOTE)
+ ECHO_WMC =@echo $(QUOTE)[WMC] $@$(QUOTE)
+ ECHO_NCI =@echo $(QUOTE)[NCI] $@$(QUOTE)
+ ECHO_CABMAN =@echo $(QUOTE)[CABMAN] $<$(QUOTE)
+ ECHO_CDMAKE =@echo $(QUOTE)[CDMAKE] $@$(QUOTE)
+ ECHO_MKHIVE =@echo $(QUOTE)[MKHIVE] $@$(QUOTE)
+ ECHO_REGTESTS=@echo $(QUOTE)[REGTESTS] $@$(QUOTE)
+ ECHO_TEST =@echo $(QUOTE)[TEST] $@$(QUOTE)
+ ECHO_GENDIB =@echo $(QUOTE)[GENDIB] $@$(QUOTE)
+else
+ ECHO_CP =
+ ECHO_MKDIR =
+ ECHO_BUILDNO =
+ ECHO_INVOKE =
+ ECHO_PCH =
+ ECHO_CC =
+ ECHO_GAS =
+ ECHO_NASM =
+ ECHO_AR =
+ ECHO_WINEBLD =
+ ECHO_WRC =
+ ECHO_WIDL =
+ ECHO_BIN2RES =
+ ECHO_DLLTOOL =
+ ECHO_LD =
+ ECHO_NM =
+ ECHO_OBJDUMP =
+ ECHO_RBUILD =
+ ECHO_RSYM =
+ ECHO_WMC =
+ ECHO_NCI =
+ ECHO_CABMAN =
+ ECHO_CDMAKE =
+ ECHO_MKHIVE =
+ ECHO_REGTESTS=
+ ECHO_TEST =
+ ECHO_GENDIB =
+endif
+
+
+host_gcc = $(Q)gcc
+host_gpp = $(Q)g++
+host_ld = $(Q)ld
+host_ar = $(Q)ar
+host_objcopy = $(Q)objcopy
+ifeq ($(HOST),mingw32-linux)
+ export EXEPREFIX = ./
+ifeq ($(OSTYPE),msys)
+ export EXEPOSTFIX = .exe
+else
+ export EXEPOSTFIX =
+endif
+ export SEP = /
+ mkdir = -$(Q)mkdir -p
+ gcc = $(Q)$(PREFIX)-gcc
+ gpp = $(Q)$(PREFIX)-g++
+ ld = $(Q)$(PREFIX)-ld
+ nm = $(Q)$(PREFIX)-nm
+ objdump = $(Q)$(PREFIX)-objdump
+ ar = $(Q)$(PREFIX)-ar
+ objcopy = $(Q)$(PREFIX)-objcopy
+ dlltool = $(Q)$(PREFIX)-dlltool
+ windres = $(Q)$(PREFIX)-windres
+ rm = $(Q)rm -f
+ cp = $(Q)cp
NUL = /dev/null
else # mingw32-windows
- EXEPREFIX =
- EXEPOSTFIX = .exe
- SEP = \$(EMPTY_VAR)
- nmkdir = mkdir
- gcc = gcc
- gpp = g++
- ld = ld
- ar = ar
- objcopy = objcopy
- dlltool = dlltool
- windres = windres
- rm = del /f /q
- cp = copy /y
+ ifeq ($(OSTYPE),msys)
+ HOST=mingw32-linux
+ export EXEPREFIX = ./
+ export EXEPOSTFIX = .exe
+ export SEP = /
+ mkdir = -$(Q)mkdir -p
+ gcc = $(Q)gcc
+ gpp = $(Q)g++
+ ld = $(Q)ld
+ nm = $(Q)nm
+ objdump = $(Q)objdump
+ ar = $(Q)ar
+ objcopy = $(Q)objcopy
+ dlltool = $(Q)dlltool
+ windres = $(Q)windres
+ rm = $(Q)rm -f
+ cp = $(Q)cp
+ NUL = /dev/null
+ else
+ export EXEPREFIX =
+ export EXEPOSTFIX = .exe
+ ROS_EMPTY =
+ export SEP = \$(ROS_EMPTY)
+ mkdir = -$(Q)mkdir
+ gcc = $(Q)gcc
+ gpp = $(Q)g++
+ ld = $(Q)ld
+ nm = $(Q)nm
+ objdump = $(Q)objdump
+ ar = $(Q)ar
+ objcopy = $(Q)objcopy
+ dlltool = $(Q)dlltool
+ windres = $(Q)windres
+ rm = $(Q)del /f /q
+ cp = $(Q)copy /y
NUL = NUL
+ endif
endif
-.PHONY: all
-.PHONY: clean
+ifneq ($(ROS_INTERMEDIATE),)
+ INTERMEDIATE := $(ROS_INTERMEDIATE)
+else
+ INTERMEDIATE := obj-i386
+endif
+INTERMEDIATE_ := $(INTERMEDIATE)$(SEP)
-all: Makefile.auto
+ifneq ($(ROS_OUTPUT),)
+ OUTPUT := $(ROS_OUTPUT)
+else
+ OUTPUT := output-i386
+endif
+OUTPUT_ := $(OUTPUT)$(SEP)
-ifneq ($(ROS_INTERMEDIATE),)
-$(ROS_INTERMEDIATE)tools: $(ROS_INTERMEDIATE)
- ${nmkdir} $(ROS_INTERMEDIATE)tools
+ifneq ($(ROS_TEMPORARY),)
+ TEMPORARY := $(ROS_TEMPORARY)
+else
+ TEMPORARY :=
endif
+TEMPORARY_ := $(TEMPORARY)$(SEP)
-ifneq ($(ROS_INTERMEDIATE),)
-$(ROS_INTERMEDIATE):
- ${nmkdir} $(ROS_INTERMEDIATE)
+ifneq ($(ROS_INSTALL),)
+ INSTALL := $(ROS_INSTALL)
+else
+ INSTALL := reactos
+endif
+INSTALL_ := $(INSTALL)$(SEP)
+
+$(INTERMEDIATE):
+ ${mkdir} $@
+
+ifneq ($(INTERMEDIATE),$(OUTPUT))
+$(OUTPUT):
+ ${mkdir} $@
endif
-include tools/Makefile
--include Makefile.auto
+
+NTOSKRNL_MC = ntoskrnl$(SEP)ntoskrnl.mc
+KERNEL32_MC = lib$(SEP)kernel32$(SEP)kernel32.mc
+BUILDNO_H = include$(SEP)reactos$(SEP)buildno.h
+BUGCODES_H = include$(SEP)reactos$(SEP)bugcodes.h
+BUGCODES_RC = ntoskrnl$(SEP)bugcodes.rc
+ERRCODES_H = include$(SEP)reactos$(SEP)errcodes.h
+ERRCODES_RC = lib$(SEP)kernel32$(SEP)errcodes.rc
+
+include lib/lib.mak
+include tools/tools.mak
+include boot/freeldr/bootsect/bootsect.mak
+-include $(ROS_AUTOMAKE)
PREAUTO := \
- include$(SEP)reactos$(SEP)buildno.h \
- include$(SEP)reactos$(SEP)bugcodes.h \
- ntoskrnl$(SEP)bugcodes.rc \
- include$(SEP)reactos$(SEP)errcodes.h \
- lib$(SEP)kernel32$(SEP)errcodes.rc
+ $(BIN2C_TARGET) \
+ $(BIN2RES_TARGET) \
+ $(BUILDNO_H) \
+ $(BUGCODES_H) \
+ $(BUGCODES_RC) \
+ $(ERRCODES_H) \
+ $(ERRCODES_RC) \
+ $(NCI_SERVICE_FILES) \
+ $(GENDIB_DIB_FILES)
+
+$(ROS_AUTOMAKE): $(RBUILD_TARGET) $(PREAUTO) $(XMLBUILDFILES)
+ $(ECHO_RBUILD)
+ $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) mingw
+
+.PHONY: msvc
+msvc: $(RBUILD_TARGET)
+ $(ECHO_RBUILD)
+ $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) msvc
-Makefile.auto: $(RMKDIR_TARGET) $(BUILDNO_TARGET) $(NCI_SERVICE_FILES) $(WMC_TARGET) $(WRC_TARGET) \
- $(RSYM_TARGET) $(CDMAKE_TARGET) $(RBUILD_TARGET) $(PREAUTO)
- tools$(SEP)rbuild$(SEP)rbuild$(EXEPOSTFIX) mingw
+$(BUGCODES_H) $(BUGCODES_RC): $(WMC_TARGET) $(NTOSKRNL_MC)
+ $(ECHO_WMC)
+ $(Q)$(WMC_TARGET) -i -H $(BUGCODES_H) -o $(BUGCODES_RC) $(NTOSKRNL_MC)
+$(ERRCODES_H) $(ERRCODES_RC): $(WMC_TARGET) $(KERNEL32_MC)
+ $(ECHO_WMC)
+ $(Q)$(WMC_TARGET) -i -U -H $(ERRCODES_H) -o $(ERRCODES_RC) $(KERNEL32_MC)
-include$(SEP)reactos$(SEP)bugcodes.h ntoskrnl$(SEP)bugcodes.rc: $(WMC_TARGET) ntoskrnl$(SEP)ntoskrnl.mc
- $(WMC_TARGET) -i -H include$(SEP)reactos$(SEP)bugcodes.h -o ntoskrnl$(SEP)bugcodes.rc ntoskrnl$(SEP)ntoskrnl.mc
+.PHONY: msvc6
+msvc6: $(RBUILD_TARGET)
+ $(ECHO_RBUILD)
+ $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs6.00 msvc
-include$(SEP)reactos$(SEP)errcodes.h lib$(SEP)kernel32$(SEP)errcodes.rc: $(WMC_TARGET) lib$(SEP)kernel32$(SEP)kernel32.mc
- $(WMC_TARGET) -i -H include$(SEP)reactos$(SEP)errcodes.h -o lib$(SEP)kernel32$(SEP)errcodes.rc lib$(SEP)kernel32$(SEP)kernel32.mc
+.PHONY: msvc7
+msvc7: $(RBUILD_TARGET)
+ $(ECHO_RBUILD)
+ $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs7.00 msvc
+
+.PHONY: msvc71
+msvc71: $(RBUILD_TARGET)
+ $(ECHO_RBUILD)
+ $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs7.10 msvc
+
+.PHONY: msvc8
+msvc8: $(RBUILD_TARGET)
+ $(ECHO_RBUILD)
+ $(Q)$(RBUILD_TARGET) $(ROS_RBUILDFLAGS) -vs8.00 msvc
.PHONY: makefile_auto_clean
makefile_auto_clean:
- -@$(rm) Makefile.auto $(PREAUTO) 2>$(NUL)
+ -@$(rm) $(ROS_AUTOMAKE) $(PREAUTO) 2>$(NUL)
+
+.PHONY: clean
clean: makefile_auto_clean
+
+.PHONY: depends
+depends:
+ @-$(rm) makefile.auto
+ @$(MAKE) $(filter-out depends, $(MAKECMDGOALS))
projects / reactos.git / blobdiff