+++ /dev/null
-/******************************************************************************
- *
- * Module Name: dswload2 - Dispatcher second pass namespace load callbacks
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2017, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- * substantially similar to the "NO WARRANTY" disclaimer below
- * ("Disclaimer") and any redistribution must be conditioned upon
- * including a substantially similar Disclaimer requirement for further
- * binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- * of any contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include "acpi.h"
-#include "accommon.h"
-#include "acparser.h"
-#include "amlcode.h"
-#include "acdispat.h"
-#include "acinterp.h"
-#include "acnamesp.h"
-#include "acevents.h"
-
-#define _COMPONENT ACPI_DISPATCHER
- ACPI_MODULE_NAME ("dswload2")
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiDsLoad2BeginOp
- *
- * PARAMETERS: WalkState - Current state of the parse tree walk
- * OutOp - Wher to return op if a new one is created
- *
- * RETURN: Status
- *
- * DESCRIPTION: Descending callback used during the loading of ACPI tables.
- *
- ******************************************************************************/
-
-ACPI_STATUS
-AcpiDsLoad2BeginOp (
- ACPI_WALK_STATE *WalkState,
- ACPI_PARSE_OBJECT **OutOp)
-{
- ACPI_PARSE_OBJECT *Op;
- ACPI_NAMESPACE_NODE *Node;
- ACPI_STATUS Status;
- ACPI_OBJECT_TYPE ObjectType;
- char *BufferPtr;
- UINT32 Flags;
-
-
- ACPI_FUNCTION_TRACE (DsLoad2BeginOp);
-
-
- Op = WalkState->Op;
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", Op, WalkState));
-
- if (Op)
- {
- if ((WalkState->ControlState) &&
- (WalkState->ControlState->Common.State ==
- ACPI_CONTROL_CONDITIONAL_EXECUTING))
- {
- /* We are executing a while loop outside of a method */
-
- Status = AcpiDsExecBeginOp (WalkState, OutOp);
- return_ACPI_STATUS (Status);
- }
-
- /* We only care about Namespace opcodes here */
-
- if ((!(WalkState->OpInfo->Flags & AML_NSOPCODE) &&
- (WalkState->Opcode != AML_INT_NAMEPATH_OP)) ||
- (!(WalkState->OpInfo->Flags & AML_NAMED)))
- {
- return_ACPI_STATUS (AE_OK);
- }
-
- /* Get the name we are going to enter or lookup in the namespace */
-
- if (WalkState->Opcode == AML_INT_NAMEPATH_OP)
- {
- /* For Namepath op, get the path string */
-
- BufferPtr = Op->Common.Value.String;
- if (!BufferPtr)
- {
- /* No name, just exit */
-
- return_ACPI_STATUS (AE_OK);
- }
- }
- else
- {
- /* Get name from the op */
-
- BufferPtr = ACPI_CAST_PTR (char, &Op->Named.Name);
- }
- }
- else
- {
- /* Get the namestring from the raw AML */
-
- BufferPtr = AcpiPsGetNextNamestring (&WalkState->ParserState);
- }
-
- /* Map the opcode into an internal object type */
-
- ObjectType = WalkState->OpInfo->ObjectType;
-
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
- "State=%p Op=%p Type=%X\n", WalkState, Op, ObjectType));
-
- switch (WalkState->Opcode)
- {
- case AML_FIELD_OP:
- case AML_BANK_FIELD_OP:
- case AML_INDEX_FIELD_OP:
-
- Node = NULL;
- Status = AE_OK;
- break;
-
- case AML_INT_NAMEPATH_OP:
- /*
- * The NamePath is an object reference to an existing object.
- * Don't enter the name into the namespace, but look it up
- * for use later.
- */
- Status = AcpiNsLookup (WalkState->ScopeInfo, BufferPtr, ObjectType,
- ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
- WalkState, &(Node));
- break;
-
- case AML_SCOPE_OP:
-
- /* Special case for Scope(\) -> refers to the Root node */
-
- if (Op && (Op->Named.Node == AcpiGbl_RootNode))
- {
- Node = Op->Named.Node;
-
- Status = AcpiDsScopeStackPush (Node, ObjectType, WalkState);
- if (ACPI_FAILURE (Status))
- {
- return_ACPI_STATUS (Status);
- }
- }
- else
- {
- /*
- * The Path is an object reference to an existing object.
- * Don't enter the name into the namespace, but look it up
- * for use later.
- */
- Status = AcpiNsLookup (WalkState->ScopeInfo, BufferPtr, ObjectType,
- ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
- WalkState, &(Node));
- if (ACPI_FAILURE (Status))
- {
-#ifdef ACPI_ASL_COMPILER
- if (Status == AE_NOT_FOUND)
- {
- Status = AE_OK;
- }
- else
- {
- ACPI_ERROR_NAMESPACE (BufferPtr, Status);
- }
-#else
- ACPI_ERROR_NAMESPACE (BufferPtr, Status);
-#endif
- return_ACPI_STATUS (Status);
- }
- }
-
- /*
- * We must check to make sure that the target is
- * one of the opcodes that actually opens a scope
- */
- switch (Node->Type)
- {
- case ACPI_TYPE_ANY:
- case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
- case ACPI_TYPE_DEVICE:
- case ACPI_TYPE_POWER:
- case ACPI_TYPE_PROCESSOR:
- case ACPI_TYPE_THERMAL:
-
- /* These are acceptable types */
- break;
-
- case ACPI_TYPE_INTEGER:
- case ACPI_TYPE_STRING:
- case ACPI_TYPE_BUFFER:
-
- /*
- * These types we will allow, but we will change the type.
- * This enables some existing code of the form:
- *
- * Name (DEB, 0)
- * Scope (DEB) { ... }
- */
- ACPI_WARNING ((AE_INFO,
- "Type override - [%4.4s] had invalid type (%s) "
- "for Scope operator, changed to type ANY",
- AcpiUtGetNodeName (Node), AcpiUtGetTypeName (Node->Type)));
-
- Node->Type = ACPI_TYPE_ANY;
- WalkState->ScopeInfo->Common.Value = ACPI_TYPE_ANY;
- break;
-
- case ACPI_TYPE_METHOD:
-
- /*
- * Allow scope change to root during execution of module-level
- * code. Root is typed METHOD during this time.
- */
- if ((Node == AcpiGbl_RootNode) &&
- (WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL))
- {
- break;
- }
-
- /*lint -fallthrough */
-
- default:
-
- /* All other types are an error */
-
- ACPI_ERROR ((AE_INFO,
- "Invalid type (%s) for target of "
- "Scope operator [%4.4s] (Cannot override)",
- AcpiUtGetTypeName (Node->Type), AcpiUtGetNodeName (Node)));
-
- return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
- }
- break;
-
- default:
-
- /* All other opcodes */
-
- if (Op && Op->Common.Node)
- {
- /* This op/node was previously entered into the namespace */
-
- Node = Op->Common.Node;
-
- if (AcpiNsOpensScope (ObjectType))
- {
- Status = AcpiDsScopeStackPush (Node, ObjectType, WalkState);
- if (ACPI_FAILURE (Status))
- {
- return_ACPI_STATUS (Status);
- }
- }
-
- return_ACPI_STATUS (AE_OK);
- }
-
- /*
- * Enter the named type into the internal namespace. We enter the name
- * as we go downward in the parse tree. Any necessary subobjects that
- * involve arguments to the opcode must be created as we go back up the
- * parse tree later.
- *
- * Note: Name may already exist if we are executing a deferred opcode.
- */
- if (WalkState->DeferredNode)
- {
- /* This name is already in the namespace, get the node */
-
- Node = WalkState->DeferredNode;
- Status = AE_OK;
- break;
- }
-
- Flags = ACPI_NS_NO_UPSEARCH;
- if (WalkState->PassNumber == ACPI_IMODE_EXECUTE)
- {
- /* Execution mode, node cannot already exist, node is temporary */
-
- Flags |= ACPI_NS_ERROR_IF_FOUND;
-
- if (!(WalkState->ParseFlags & ACPI_PARSE_MODULE_LEVEL))
- {
- Flags |= ACPI_NS_TEMPORARY;
- }
- }
-
-#ifdef ACPI_ASL_COMPILER
-
- /*
- * Do not open a scope for AML_EXTERNAL_OP
- * AcpiNsLookup can open a new scope based on the object type
- * of this op. AML_EXTERNAL_OP is a declaration rather than a
- * definition. In the case that this external is a method object,
- * AcpiNsLookup will open a new scope. However, an AML_EXTERNAL_OP
- * associated with the ACPI_TYPE_METHOD is a declaration, rather than
- * a definition. Flags is set to avoid opening a scope for any
- * AML_EXTERNAL_OP.
- */
- if (WalkState->Opcode == AML_EXTERNAL_OP)
- {
- Flags |= ACPI_NS_DONT_OPEN_SCOPE;
- }
-#endif
-
- /* Add new entry or lookup existing entry */
-
- Status = AcpiNsLookup (WalkState->ScopeInfo, BufferPtr, ObjectType,
- ACPI_IMODE_LOAD_PASS2, Flags, WalkState, &Node);
-
- if (ACPI_SUCCESS (Status) && (Flags & ACPI_NS_TEMPORARY))
- {
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
- "***New Node [%4.4s] %p is temporary\n",
- AcpiUtGetNodeName (Node), Node));
- }
- break;
- }
-
- if (ACPI_FAILURE (Status))
- {
- ACPI_ERROR_NAMESPACE (BufferPtr, Status);
- return_ACPI_STATUS (Status);
- }
-
- if (!Op)
- {
- /* Create a new op */
-
- Op = AcpiPsAllocOp (WalkState->Opcode, WalkState->Aml);
- if (!Op)
- {
- return_ACPI_STATUS (AE_NO_MEMORY);
- }
-
- /* Initialize the new op */
-
- if (Node)
- {
- Op->Named.Name = Node->Name.Integer;
- }
- *OutOp = Op;
- }
-
- /*
- * Put the Node in the "op" object that the parser uses, so we
- * can get it again quickly when this scope is closed
- */
- Op->Common.Node = Node;
- return_ACPI_STATUS (Status);
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiDsLoad2EndOp
- *
- * PARAMETERS: WalkState - Current state of the parse tree walk
- *
- * RETURN: Status
- *
- * DESCRIPTION: Ascending callback used during the loading of the namespace,
- * both control methods and everything else.
- *
- ******************************************************************************/
-
-ACPI_STATUS
-AcpiDsLoad2EndOp (
- ACPI_WALK_STATE *WalkState)
-{
- ACPI_PARSE_OBJECT *Op;
- ACPI_STATUS Status = AE_OK;
- ACPI_OBJECT_TYPE ObjectType;
- ACPI_NAMESPACE_NODE *Node;
- ACPI_PARSE_OBJECT *Arg;
- ACPI_NAMESPACE_NODE *NewNode;
-#ifndef ACPI_NO_METHOD_EXECUTION
- UINT32 i;
- UINT8 RegionSpace;
-#endif
-
-
- ACPI_FUNCTION_TRACE (DsLoad2EndOp);
-
- Op = WalkState->Op;
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
- WalkState->OpInfo->Name, Op, WalkState));
-
- /* Check if opcode had an associated namespace object */
-
- if (!(WalkState->OpInfo->Flags & AML_NSOBJECT))
- {
- return_ACPI_STATUS (AE_OK);
- }
-
- if (Op->Common.AmlOpcode == AML_SCOPE_OP)
- {
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
- "Ending scope Op=%p State=%p\n", Op, WalkState));
- }
-
- ObjectType = WalkState->OpInfo->ObjectType;
-
- /*
- * Get the Node/name from the earlier lookup
- * (It was saved in the *op structure)
- */
- Node = Op->Common.Node;
-
- /*
- * Put the Node on the object stack (Contains the ACPI Name of
- * this object)
- */
- WalkState->Operands[0] = (void *) Node;
- WalkState->NumOperands = 1;
-
- /* Pop the scope stack */
-
- if (AcpiNsOpensScope (ObjectType) &&
- (Op->Common.AmlOpcode != AML_INT_METHODCALL_OP))
- {
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s) Popping scope for Op %p\n",
- AcpiUtGetTypeName (ObjectType), Op));
-
- Status = AcpiDsScopeStackPop (WalkState);
- if (ACPI_FAILURE (Status))
- {
- goto Cleanup;
- }
- }
-
- /*
- * Named operations are as follows:
- *
- * AML_ALIAS
- * AML_BANKFIELD
- * AML_CREATEBITFIELD
- * AML_CREATEBYTEFIELD
- * AML_CREATEDWORDFIELD
- * AML_CREATEFIELD
- * AML_CREATEQWORDFIELD
- * AML_CREATEWORDFIELD
- * AML_DATA_REGION
- * AML_DEVICE
- * AML_EVENT
- * AML_FIELD
- * AML_INDEXFIELD
- * AML_METHOD
- * AML_METHODCALL
- * AML_MUTEX
- * AML_NAME
- * AML_NAMEDFIELD
- * AML_OPREGION
- * AML_POWERRES
- * AML_PROCESSOR
- * AML_SCOPE
- * AML_THERMALZONE
- */
-
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
- "Create-Load [%s] State=%p Op=%p NamedObj=%p\n",
- AcpiPsGetOpcodeName (Op->Common.AmlOpcode), WalkState, Op, Node));
-
- /* Decode the opcode */
-
- Arg = Op->Common.Value.Arg;
-
- switch (WalkState->OpInfo->Type)
- {
-#ifndef ACPI_NO_METHOD_EXECUTION
-
- case AML_TYPE_CREATE_FIELD:
- /*
- * Create the field object, but the field buffer and index must
- * be evaluated later during the execution phase
- */
- Status = AcpiDsCreateBufferField (Op, WalkState);
- break;
-
- case AML_TYPE_NAMED_FIELD:
- /*
- * If we are executing a method, initialize the field
- */
- if (WalkState->MethodNode)
- {
- Status = AcpiDsInitFieldObjects (Op, WalkState);
- }
-
- switch (Op->Common.AmlOpcode)
- {
- case AML_INDEX_FIELD_OP:
-
- Status = AcpiDsCreateIndexField (
- Op, (ACPI_HANDLE) Arg->Common.Node, WalkState);
- break;
-
- case AML_BANK_FIELD_OP:
-
- Status = AcpiDsCreateBankField (Op, Arg->Common.Node, WalkState);
- break;
-
- case AML_FIELD_OP:
-
- Status = AcpiDsCreateField (Op, Arg->Common.Node, WalkState);
- break;
-
- default:
-
- /* All NAMED_FIELD opcodes must be handled above */
- break;
- }
- break;
-
- case AML_TYPE_NAMED_SIMPLE:
-
- Status = AcpiDsCreateOperands (WalkState, Arg);
- if (ACPI_FAILURE (Status))
- {
- goto Cleanup;
- }
-
- switch (Op->Common.AmlOpcode)
- {
- case AML_PROCESSOR_OP:
-
- Status = AcpiExCreateProcessor (WalkState);
- break;
-
- case AML_POWER_RESOURCE_OP:
-
- Status = AcpiExCreatePowerResource (WalkState);
- break;
-
- case AML_MUTEX_OP:
-
- Status = AcpiExCreateMutex (WalkState);
- break;
-
- case AML_EVENT_OP:
-
- Status = AcpiExCreateEvent (WalkState);
- break;
-
- case AML_ALIAS_OP:
-
- Status = AcpiExCreateAlias (WalkState);
- break;
-
- default:
-
- /* Unknown opcode */
-
- Status = AE_OK;
- goto Cleanup;
- }
-
- /* Delete operands */
-
- for (i = 1; i < WalkState->NumOperands; i++)
- {
- AcpiUtRemoveReference (WalkState->Operands[i]);
- WalkState->Operands[i] = NULL;
- }
-
- break;
-#endif /* ACPI_NO_METHOD_EXECUTION */
-
- case AML_TYPE_NAMED_COMPLEX:
-
- switch (Op->Common.AmlOpcode)
- {
-#ifndef ACPI_NO_METHOD_EXECUTION
- case AML_REGION_OP:
- case AML_DATA_REGION_OP:
-
- if (Op->Common.AmlOpcode == AML_REGION_OP)
- {
- RegionSpace = (ACPI_ADR_SPACE_TYPE)
- ((Op->Common.Value.Arg)->Common.Value.Integer);
- }
- else
- {
- RegionSpace = ACPI_ADR_SPACE_DATA_TABLE;
- }
-
- /*
- * The OpRegion is not fully parsed at this time. The only valid
- * argument is the SpaceId. (We must save the address of the
- * AML of the address and length operands)
- *
- * If we have a valid region, initialize it. The namespace is
- * unlocked at this point.
- *
- * Need to unlock interpreter if it is locked (if we are running
- * a control method), in order to allow _REG methods to be run
- * during AcpiEvInitializeRegion.
- */
- if (WalkState->MethodNode)
- {
- /*
- * Executing a method: initialize the region and unlock
- * the interpreter
- */
- Status = AcpiExCreateRegion (Op->Named.Data,
- Op->Named.Length, RegionSpace, WalkState);
- if (ACPI_FAILURE (Status))
- {
- return_ACPI_STATUS (Status);
- }
- }
-
- Status = AcpiEvInitializeRegion (
- AcpiNsGetAttachedObject (Node));
- break;
-
- case AML_NAME_OP:
-
- Status = AcpiDsCreateNode (WalkState, Node, Op);
- break;
-
- case AML_METHOD_OP:
- /*
- * MethodOp PkgLength NameString MethodFlags TermList
- *
- * Note: We must create the method node/object pair as soon as we
- * see the method declaration. This allows later pass1 parsing
- * of invocations of the method (need to know the number of
- * arguments.)
- */
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
- "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
- WalkState, Op, Op->Named.Node));
-
- if (!AcpiNsGetAttachedObject (Op->Named.Node))
- {
- WalkState->Operands[0] = ACPI_CAST_PTR (void, Op->Named.Node);
- WalkState->NumOperands = 1;
-
- Status = AcpiDsCreateOperands (
- WalkState, Op->Common.Value.Arg);
- if (ACPI_SUCCESS (Status))
- {
- Status = AcpiExCreateMethod (
- Op->Named.Data, Op->Named.Length, WalkState);
- }
-
- WalkState->Operands[0] = NULL;
- WalkState->NumOperands = 0;
-
- if (ACPI_FAILURE (Status))
- {
- return_ACPI_STATUS (Status);
- }
- }
- break;
-
-#endif /* ACPI_NO_METHOD_EXECUTION */
-
- default:
-
- /* All NAMED_COMPLEX opcodes must be handled above */
- break;
- }
- break;
-
- case AML_CLASS_INTERNAL:
-
- /* case AML_INT_NAMEPATH_OP: */
- break;
-
- case AML_CLASS_METHOD_CALL:
-
- ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
- "RESOLVING-MethodCall: State=%p Op=%p NamedObj=%p\n",
- WalkState, Op, Node));
-
- /*
- * Lookup the method name and save the Node
- */
- Status = AcpiNsLookup (WalkState->ScopeInfo, Arg->Common.Value.String,
- ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS2,
- ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
- WalkState, &(NewNode));
- if (ACPI_SUCCESS (Status))
- {
- /*
- * Make sure that what we found is indeed a method
- * We didn't search for a method on purpose, to see if the name
- * would resolve
- */
- if (NewNode->Type != ACPI_TYPE_METHOD)
- {
- Status = AE_AML_OPERAND_TYPE;
- }
-
- /* We could put the returned object (Node) on the object stack for
- * later, but for now, we will put it in the "op" object that the
- * parser uses, so we can get it again at the end of this scope
- */
- Op->Common.Node = NewNode;
- }
- else
- {
- ACPI_ERROR_NAMESPACE (Arg->Common.Value.String, Status);
- }
- break;
-
-
- default:
-
- break;
- }
-
-Cleanup:
-
- /* Remove the Node pushed at the very beginning */
-
- WalkState->Operands[0] = NULL;
- WalkState->NumOperands = 0;
- return_ACPI_STATUS (Status);
-}