Git conversion: Make reactos the root directory, move rosapps, rostests, wallpapers...
[reactos.git] / reactos / drivers / bus / acpi / acpica / namespace / nssearch.c
diff --git a/reactos/drivers/bus/acpi/acpica/namespace/nssearch.c b/reactos/drivers/bus/acpi/acpica/namespace/nssearch.c
deleted file mode 100644 (file)
index 30f7ce2..0000000
+++ /dev/null
@@ -1,453 +0,0 @@
-/*******************************************************************************
- *
- * Module Name: nssearch - Namespace search
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2017, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include "acpi.h"
-#include "accommon.h"
-#include "acnamesp.h"
-
-#ifdef ACPI_ASL_COMPILER
-#include "amlcode.h"
-#endif
-
-#define _COMPONENT          ACPI_NAMESPACE
-        ACPI_MODULE_NAME    ("nssearch")
-
-/* Local prototypes */
-
-static ACPI_STATUS
-AcpiNsSearchParentTree (
-    UINT32                  TargetName,
-    ACPI_NAMESPACE_NODE     *Node,
-    ACPI_OBJECT_TYPE        Type,
-    ACPI_NAMESPACE_NODE     **ReturnNode);
-
-
-/*******************************************************************************
- *
- * FUNCTION:    AcpiNsSearchOneScope
- *
- * PARAMETERS:  TargetName      - Ascii ACPI name to search for
- *              ParentNode      - Starting node where search will begin
- *              Type            - Object type to match
- *              ReturnNode      - Where the matched Named obj is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Search a single level of the namespace. Performs a
- *              simple search of the specified level, and does not add
- *              entries or search parents.
- *
- *
- *      Named object lists are built (and subsequently dumped) in the
- *      order in which the names are encountered during the namespace load;
- *
- *      All namespace searching is linear in this implementation, but
- *      could be easily modified to support any improved search
- *      algorithm. However, the linear search was chosen for simplicity
- *      and because the trees are small and the other interpreter
- *      execution overhead is relatively high.
- *
- *      Note: CPU execution analysis has shown that the AML interpreter spends
- *      a very small percentage of its time searching the namespace. Therefore,
- *      the linear search seems to be sufficient, as there would seem to be
- *      little value in improving the search.
- *
- ******************************************************************************/
-
-ACPI_STATUS
-AcpiNsSearchOneScope (
-    UINT32                  TargetName,
-    ACPI_NAMESPACE_NODE     *ParentNode,
-    ACPI_OBJECT_TYPE        Type,
-    ACPI_NAMESPACE_NODE     **ReturnNode)
-{
-    ACPI_NAMESPACE_NODE     *Node;
-
-
-    ACPI_FUNCTION_TRACE (NsSearchOneScope);
-
-
-#ifdef ACPI_DEBUG_OUTPUT
-    if (ACPI_LV_NAMES & AcpiDbgLevel)
-    {
-        char                *ScopeName;
-
-        ScopeName = AcpiNsGetNormalizedPathname (ParentNode, TRUE);
-        if (ScopeName)
-        {
-            ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
-                "Searching %s (%p) For [%4.4s] (%s)\n",
-                ScopeName, ParentNode, ACPI_CAST_PTR (char, &TargetName),
-                AcpiUtGetTypeName (Type)));
-
-            ACPI_FREE (ScopeName);
-        }
-    }
-#endif
-
-    /*
-     * Search for name at this namespace level, which is to say that we
-     * must search for the name among the children of this object
-     */
-    Node = ParentNode->Child;
-    while (Node)
-    {
-        /* Check for match against the name */
-
-        if (Node->Name.Integer == TargetName)
-        {
-            /* Resolve a control method alias if any */
-
-            if (AcpiNsGetType (Node) == ACPI_TYPE_LOCAL_METHOD_ALIAS)
-            {
-                Node = ACPI_CAST_PTR (ACPI_NAMESPACE_NODE, Node->Object);
-            }
-
-            /* Found matching entry */
-
-            ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
-                "Name [%4.4s] (%s) %p found in scope [%4.4s] %p\n",
-                ACPI_CAST_PTR (char, &TargetName),
-                AcpiUtGetTypeName (Node->Type),
-                Node, AcpiUtGetNodeName (ParentNode), ParentNode));
-
-            *ReturnNode = Node;
-            return_ACPI_STATUS (AE_OK);
-        }
-
-        /* Didn't match name, move on to the next peer object */
-
-        Node = Node->Peer;
-    }
-
-    /* Searched entire namespace level, not found */
-
-    ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
-        "Name [%4.4s] (%s) not found in search in scope [%4.4s] "
-        "%p first child %p\n",
-        ACPI_CAST_PTR (char, &TargetName), AcpiUtGetTypeName (Type),
-        AcpiUtGetNodeName (ParentNode), ParentNode, ParentNode->Child));
-
-    return_ACPI_STATUS (AE_NOT_FOUND);
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    AcpiNsSearchParentTree
- *
- * PARAMETERS:  TargetName      - Ascii ACPI name to search for
- *              Node            - Starting node where search will begin
- *              Type            - Object type to match
- *              ReturnNode      - Where the matched Node is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Called when a name has not been found in the current namespace
- *              level. Before adding it or giving up, ACPI scope rules require
- *              searching enclosing scopes in cases identified by AcpiNsLocal().
- *
- *              "A name is located by finding the matching name in the current
- *              name space, and then in the parent name space. If the parent
- *              name space does not contain the name, the search continues
- *              recursively until either the name is found or the name space
- *              does not have a parent (the root of the name space). This
- *              indicates that the name is not found" (From ACPI Specification,
- *              section 5.3)
- *
- ******************************************************************************/
-
-static ACPI_STATUS
-AcpiNsSearchParentTree (
-    UINT32                  TargetName,
-    ACPI_NAMESPACE_NODE     *Node,
-    ACPI_OBJECT_TYPE        Type,
-    ACPI_NAMESPACE_NODE     **ReturnNode)
-{
-    ACPI_STATUS             Status;
-    ACPI_NAMESPACE_NODE     *ParentNode;
-
-
-    ACPI_FUNCTION_TRACE (NsSearchParentTree);
-
-
-    ParentNode = Node->Parent;
-
-    /*
-     * If there is no parent (i.e., we are at the root) or type is "local",
-     * we won't be searching the parent tree.
-     */
-    if (!ParentNode)
-    {
-        ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, "[%4.4s] has no parent\n",
-            ACPI_CAST_PTR (char, &TargetName)));
-        return_ACPI_STATUS (AE_NOT_FOUND);
-    }
-
-    if (AcpiNsLocal (Type))
-    {
-        ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
-            "[%4.4s] type [%s] must be local to this scope (no parent search)\n",
-            ACPI_CAST_PTR (char, &TargetName), AcpiUtGetTypeName (Type)));
-        return_ACPI_STATUS (AE_NOT_FOUND);
-    }
-
-    /* Search the parent tree */
-
-    ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
-        "Searching parent [%4.4s] for [%4.4s]\n",
-        AcpiUtGetNodeName (ParentNode), ACPI_CAST_PTR (char, &TargetName)));
-
-    /* Search parents until target is found or we have backed up to the root */
-
-    while (ParentNode)
-    {
-        /*
-         * Search parent scope. Use TYPE_ANY because we don't care about the
-         * object type at this point, we only care about the existence of
-         * the actual name we are searching for. Typechecking comes later.
-         */
-        Status = AcpiNsSearchOneScope (
-            TargetName, ParentNode, ACPI_TYPE_ANY, ReturnNode);
-        if (ACPI_SUCCESS (Status))
-        {
-            return_ACPI_STATUS (Status);
-        }
-
-        /* Not found here, go up another level (until we reach the root) */
-
-        ParentNode = ParentNode->Parent;
-    }
-
-    /* Not found in parent tree */
-
-    return_ACPI_STATUS (AE_NOT_FOUND);
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION:    AcpiNsSearchAndEnter
- *
- * PARAMETERS:  TargetName          - Ascii ACPI name to search for (4 chars)
- *              WalkState           - Current state of the walk
- *              Node                - Starting node where search will begin
- *              InterpreterMode     - Add names only in ACPI_MODE_LOAD_PASS_x.
- *                                    Otherwise,search only.
- *              Type                - Object type to match
- *              Flags               - Flags describing the search restrictions
- *              ReturnNode          - Where the Node is returned
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Search for a name segment in a single namespace level,
- *              optionally adding it if it is not found. If the passed
- *              Type is not Any and the type previously stored in the
- *              entry was Any (i.e. unknown), update the stored type.
- *
- *              In ACPI_IMODE_EXECUTE, search only.
- *              In other modes, search and add if not found.
- *
- ******************************************************************************/
-
-ACPI_STATUS
-AcpiNsSearchAndEnter (
-    UINT32                  TargetName,
-    ACPI_WALK_STATE         *WalkState,
-    ACPI_NAMESPACE_NODE     *Node,
-    ACPI_INTERPRETER_MODE   InterpreterMode,
-    ACPI_OBJECT_TYPE        Type,
-    UINT32                  Flags,
-    ACPI_NAMESPACE_NODE     **ReturnNode)
-{
-    ACPI_STATUS             Status;
-    ACPI_NAMESPACE_NODE     *NewNode;
-
-
-    ACPI_FUNCTION_TRACE (NsSearchAndEnter);
-
-
-    /* Parameter validation */
-
-    if (!Node || !TargetName || !ReturnNode)
-    {
-        ACPI_ERROR ((AE_INFO,
-            "Null parameter: Node %p Name 0x%X ReturnNode %p",
-            Node, TargetName, ReturnNode));
-        return_ACPI_STATUS (AE_BAD_PARAMETER);
-    }
-
-    /*
-     * Name must consist of valid ACPI characters. We will repair the name if
-     * necessary because we don't want to abort because of this, but we want
-     * all namespace names to be printable. A warning message is appropriate.
-     *
-     * This issue came up because there are in fact machines that exhibit
-     * this problem, and we want to be able to enable ACPI support for them,
-     * even though there are a few bad names.
-     */
-    AcpiUtRepairName (ACPI_CAST_PTR (char, &TargetName));
-
-    /* Try to find the name in the namespace level specified by the caller */
-
-    *ReturnNode = ACPI_ENTRY_NOT_FOUND;
-    Status = AcpiNsSearchOneScope (TargetName, Node, Type, ReturnNode);
-    if (Status != AE_NOT_FOUND)
-    {
-        /*
-         * If we found it AND the request specifies that a find is an error,
-         * return the error
-         */
-        if (Status == AE_OK)
-        {
-            /* The node was found in the namespace */
-
-            /*
-             * If the namespace override feature is enabled for this node,
-             * delete any existing attached sub-object and make the node
-             * look like a new node that is owned by the override table.
-             */
-            if (Flags & ACPI_NS_OVERRIDE_IF_FOUND)
-            {
-                ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
-                    "Namespace override: %4.4s pass %u type %X Owner %X\n",
-                    ACPI_CAST_PTR(char, &TargetName), InterpreterMode,
-                    (*ReturnNode)->Type, WalkState->OwnerId));
-
-                AcpiNsDeleteChildren (*ReturnNode);
-                if (AcpiGbl_RuntimeNamespaceOverride)
-                {
-                    AcpiUtRemoveReference ((*ReturnNode)->Object);
-                    (*ReturnNode)->Object = NULL;
-                    (*ReturnNode)->OwnerId = WalkState->OwnerId;
-                }
-                else
-                {
-                    AcpiNsRemoveNode (*ReturnNode);
-                    *ReturnNode = ACPI_ENTRY_NOT_FOUND;
-                }
-            }
-
-            /* Return an error if we don't expect to find the object */
-
-            else if (Flags & ACPI_NS_ERROR_IF_FOUND)
-            {
-                Status = AE_ALREADY_EXISTS;
-            }
-        }
-
-#ifdef ACPI_ASL_COMPILER
-        if (*ReturnNode && (*ReturnNode)->Type == ACPI_TYPE_ANY)
-        {
-            (*ReturnNode)->Flags |= ANOBJ_IS_EXTERNAL;
-        }
-#endif
-
-        /* Either found it or there was an error: finished either way */
-
-        return_ACPI_STATUS (Status);
-    }
-
-    /*
-     * The name was not found. If we are NOT performing the first pass
-     * (name entry) of loading the namespace, search the parent tree (all the
-     * way to the root if necessary.) We don't want to perform the parent
-     * search when the namespace is actually being loaded. We want to perform
-     * the search when namespace references are being resolved (load pass 2)
-     * and during the execution phase.
-     */
-    if ((InterpreterMode != ACPI_IMODE_LOAD_PASS1) &&
-        (Flags & ACPI_NS_SEARCH_PARENT))
-    {
-        /*
-         * Not found at this level - search parent tree according to the
-         * ACPI specification
-         */
-        Status = AcpiNsSearchParentTree (TargetName, Node, Type, ReturnNode);
-        if (ACPI_SUCCESS (Status))
-        {
-            return_ACPI_STATUS (Status);
-        }
-    }
-
-    /* In execute mode, just search, never add names. Exit now */
-
-    if (InterpreterMode == ACPI_IMODE_EXECUTE)
-    {
-        ACPI_DEBUG_PRINT ((ACPI_DB_NAMES,
-            "%4.4s Not found in %p [Not adding]\n",
-            ACPI_CAST_PTR (char, &TargetName), Node));
-
-        return_ACPI_STATUS (AE_NOT_FOUND);
-    }
-
-    /* Create the new named object */
-
-    NewNode = AcpiNsCreateNode (TargetName);
-    if (!NewNode)
-    {
-        return_ACPI_STATUS (AE_NO_MEMORY);
-    }
-
-#ifdef ACPI_ASL_COMPILER
-
-    /* Node is an object defined by an External() statement */
-
-    if (Flags & ACPI_NS_EXTERNAL ||
-        (WalkState && WalkState->Opcode == AML_SCOPE_OP))
-    {
-        NewNode->Flags |= ANOBJ_IS_EXTERNAL;
-    }
-#endif
-
-    if (Flags & ACPI_NS_TEMPORARY)
-    {
-        NewNode->Flags |= ANOBJ_TEMPORARY;
-    }
-
-    /* Install the new object into the parent's list of children */
-
-    AcpiNsInstallNode (WalkState, Node, NewNode, Type);
-    *ReturnNode = NewNode;
-    return_ACPI_STATUS (AE_OK);
-}