+++ /dev/null
-/*******************************************************************************
- *
- * Module Name: utresrc - Resource management utilities
- *
- ******************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2017, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- * substantially similar to the "NO WARRANTY" disclaimer below
- * ("Disclaimer") and any redistribution must be conditioned upon
- * including a substantially similar Disclaimer requirement for further
- * binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- * of any contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include "acpi.h"
-#include "accommon.h"
-#include "acresrc.h"
-
-
-#define _COMPONENT ACPI_UTILITIES
- ACPI_MODULE_NAME ("utresrc")
-
-
-/*
- * Base sizes of the raw AML resource descriptors, indexed by resource type.
- * Zero indicates a reserved (and therefore invalid) resource type.
- */
-const UINT8 AcpiGbl_ResourceAmlSizes[] =
-{
- /* Small descriptors */
-
- 0,
- 0,
- 0,
- 0,
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_IRQ),
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_DMA),
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_START_DEPENDENT),
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_DEPENDENT),
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_IO),
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_IO),
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_FIXED_DMA),
- 0,
- 0,
- 0,
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_VENDOR_SMALL),
- ACPI_AML_SIZE_SMALL (AML_RESOURCE_END_TAG),
-
- /* Large descriptors */
-
- 0,
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_MEMORY24),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_GENERIC_REGISTER),
- 0,
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_VENDOR_LARGE),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_MEMORY32),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_FIXED_MEMORY32),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS32),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS16),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_IRQ),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS64),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_ADDRESS64),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_GPIO),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_FUNCTION),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_COMMON_SERIALBUS),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_CONFIG),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_GROUP),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_GROUP_FUNCTION),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_GROUP_CONFIG),
-};
-
-const UINT8 AcpiGbl_ResourceAmlSerialBusSizes[] =
-{
- 0,
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_I2C_SERIALBUS),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_SPI_SERIALBUS),
- ACPI_AML_SIZE_LARGE (AML_RESOURCE_UART_SERIALBUS),
-};
-
-
-/*
- * Resource types, used to validate the resource length field.
- * The length of fixed-length types must match exactly, variable
- * lengths must meet the minimum required length, etc.
- * Zero indicates a reserved (and therefore invalid) resource type.
- */
-static const UINT8 AcpiGbl_ResourceTypes[] =
-{
- /* Small descriptors */
-
- 0,
- 0,
- 0,
- 0,
- ACPI_SMALL_VARIABLE_LENGTH, /* 04 IRQ */
- ACPI_FIXED_LENGTH, /* 05 DMA */
- ACPI_SMALL_VARIABLE_LENGTH, /* 06 StartDependentFunctions */
- ACPI_FIXED_LENGTH, /* 07 EndDependentFunctions */
- ACPI_FIXED_LENGTH, /* 08 IO */
- ACPI_FIXED_LENGTH, /* 09 FixedIO */
- ACPI_FIXED_LENGTH, /* 0A FixedDMA */
- 0,
- 0,
- 0,
- ACPI_VARIABLE_LENGTH, /* 0E VendorShort */
- ACPI_FIXED_LENGTH, /* 0F EndTag */
-
- /* Large descriptors */
-
- 0,
- ACPI_FIXED_LENGTH, /* 01 Memory24 */
- ACPI_FIXED_LENGTH, /* 02 GenericRegister */
- 0,
- ACPI_VARIABLE_LENGTH, /* 04 VendorLong */
- ACPI_FIXED_LENGTH, /* 05 Memory32 */
- ACPI_FIXED_LENGTH, /* 06 Memory32Fixed */
- ACPI_VARIABLE_LENGTH, /* 07 Dword* address */
- ACPI_VARIABLE_LENGTH, /* 08 Word* address */
- ACPI_VARIABLE_LENGTH, /* 09 ExtendedIRQ */
- ACPI_VARIABLE_LENGTH, /* 0A Qword* address */
- ACPI_FIXED_LENGTH, /* 0B Extended* address */
- ACPI_VARIABLE_LENGTH, /* 0C Gpio* */
- ACPI_VARIABLE_LENGTH, /* 0D PinFunction */
- ACPI_VARIABLE_LENGTH, /* 0E *SerialBus */
- ACPI_VARIABLE_LENGTH, /* 0F PinConfig */
- ACPI_VARIABLE_LENGTH, /* 10 PinGroup */
- ACPI_VARIABLE_LENGTH, /* 11 PinGroupFunction */
- ACPI_VARIABLE_LENGTH, /* 12 PinGroupConfig */
-};
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtWalkAmlResources
- *
- * PARAMETERS: WalkState - Current walk info
- * PARAMETERS: Aml - Pointer to the raw AML resource template
- * AmlLength - Length of the entire template
- * UserFunction - Called once for each descriptor found. If
- * NULL, a pointer to the EndTag is returned
- * Context - Passed to UserFunction
- *
- * RETURN: Status
- *
- * DESCRIPTION: Walk a raw AML resource list(buffer). User function called
- * once for each resource found.
- *
- ******************************************************************************/
-
-ACPI_STATUS
-AcpiUtWalkAmlResources (
- ACPI_WALK_STATE *WalkState,
- UINT8 *Aml,
- ACPI_SIZE AmlLength,
- ACPI_WALK_AML_CALLBACK UserFunction,
- void **Context)
-{
- ACPI_STATUS Status;
- UINT8 *EndAml;
- UINT8 ResourceIndex;
- UINT32 Length;
- UINT32 Offset = 0;
- UINT8 EndTag[2] = {0x79, 0x00};
-
-
- ACPI_FUNCTION_TRACE (UtWalkAmlResources);
-
-
- /* The absolute minimum resource template is one EndTag descriptor */
-
- if (AmlLength < sizeof (AML_RESOURCE_END_TAG))
- {
- return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
- }
-
- /* Point to the end of the resource template buffer */
-
- EndAml = Aml + AmlLength;
-
- /* Walk the byte list, abort on any invalid descriptor type or length */
-
- while (Aml < EndAml)
- {
- /* Validate the Resource Type and Resource Length */
-
- Status = AcpiUtValidateResource (WalkState, Aml, &ResourceIndex);
- if (ACPI_FAILURE (Status))
- {
- /*
- * Exit on failure. Cannot continue because the descriptor
- * length may be bogus also.
- */
- return_ACPI_STATUS (Status);
- }
-
- /* Get the length of this descriptor */
-
- Length = AcpiUtGetDescriptorLength (Aml);
-
- /* Invoke the user function */
-
- if (UserFunction)
- {
- Status = UserFunction (
- Aml, Length, Offset, ResourceIndex, Context);
- if (ACPI_FAILURE (Status))
- {
- return_ACPI_STATUS (Status);
- }
- }
-
- /* An EndTag descriptor terminates this resource template */
-
- if (AcpiUtGetResourceType (Aml) == ACPI_RESOURCE_NAME_END_TAG)
- {
- /*
- * There must be at least one more byte in the buffer for
- * the 2nd byte of the EndTag
- */
- if ((Aml + 1) >= EndAml)
- {
- return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
- }
-
- /*
- * Don't attempt to perform any validation on the 2nd byte.
- * Although all known ASL compilers insert a zero for the 2nd
- * byte, it can also be a checksum (as per the ACPI spec),
- * and this is occasionally seen in the field. July 2017.
- */
-
- /* Return the pointer to the EndTag if requested */
-
- if (!UserFunction)
- {
- *Context = Aml;
- }
-
- /* Normal exit */
-
- return_ACPI_STATUS (AE_OK);
- }
-
- Aml += Length;
- Offset += Length;
- }
-
- /* Did not find an EndTag descriptor */
-
- if (UserFunction)
- {
- /* Insert an EndTag anyway. AcpiRsGetListLength always leaves room */
-
- (void) AcpiUtValidateResource (WalkState, EndTag, &ResourceIndex);
- Status = UserFunction (EndTag, 2, Offset, ResourceIndex, Context);
- if (ACPI_FAILURE (Status))
- {
- return_ACPI_STATUS (Status);
- }
- }
-
- return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtValidateResource
- *
- * PARAMETERS: WalkState - Current walk info
- * Aml - Pointer to the raw AML resource descriptor
- * ReturnIndex - Where the resource index is returned. NULL
- * if the index is not required.
- *
- * RETURN: Status, and optionally the Index into the global resource tables
- *
- * DESCRIPTION: Validate an AML resource descriptor by checking the Resource
- * Type and Resource Length. Returns an index into the global
- * resource information/dispatch tables for later use.
- *
- ******************************************************************************/
-
-ACPI_STATUS
-AcpiUtValidateResource (
- ACPI_WALK_STATE *WalkState,
- void *Aml,
- UINT8 *ReturnIndex)
-{
- AML_RESOURCE *AmlResource;
- UINT8 ResourceType;
- UINT8 ResourceIndex;
- ACPI_RS_LENGTH ResourceLength;
- ACPI_RS_LENGTH MinimumResourceLength;
-
-
- ACPI_FUNCTION_ENTRY ();
-
-
- /*
- * 1) Validate the ResourceType field (Byte 0)
- */
- ResourceType = ACPI_GET8 (Aml);
-
- /*
- * Byte 0 contains the descriptor name (Resource Type)
- * Examine the large/small bit in the resource header
- */
- if (ResourceType & ACPI_RESOURCE_NAME_LARGE)
- {
- /* Verify the large resource type (name) against the max */
-
- if (ResourceType > ACPI_RESOURCE_NAME_LARGE_MAX)
- {
- goto InvalidResource;
- }
-
- /*
- * Large Resource Type -- bits 6:0 contain the name
- * Translate range 0x80-0x8B to index range 0x10-0x1B
- */
- ResourceIndex = (UINT8) (ResourceType - 0x70);
- }
- else
- {
- /*
- * Small Resource Type -- bits 6:3 contain the name
- * Shift range to index range 0x00-0x0F
- */
- ResourceIndex = (UINT8)
- ((ResourceType & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3);
- }
-
- /*
- * Check validity of the resource type, via AcpiGbl_ResourceTypes.
- * Zero indicates an invalid resource.
- */
- if (!AcpiGbl_ResourceTypes[ResourceIndex])
- {
- goto InvalidResource;
- }
-
- /*
- * Validate the ResourceLength field. This ensures that the length
- * is at least reasonable, and guarantees that it is non-zero.
- */
- ResourceLength = AcpiUtGetResourceLength (Aml);
- MinimumResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex];
-
- /* Validate based upon the type of resource - fixed length or variable */
-
- switch (AcpiGbl_ResourceTypes[ResourceIndex])
- {
- case ACPI_FIXED_LENGTH:
-
- /* Fixed length resource, length must match exactly */
-
- if (ResourceLength != MinimumResourceLength)
- {
- goto BadResourceLength;
- }
- break;
-
- case ACPI_VARIABLE_LENGTH:
-
- /* Variable length resource, length must be at least the minimum */
-
- if (ResourceLength < MinimumResourceLength)
- {
- goto BadResourceLength;
- }
- break;
-
- case ACPI_SMALL_VARIABLE_LENGTH:
-
- /* Small variable length resource, length can be (Min) or (Min-1) */
-
- if ((ResourceLength > MinimumResourceLength) ||
- (ResourceLength < (MinimumResourceLength - 1)))
- {
- goto BadResourceLength;
- }
- break;
-
- default:
-
- /* Shouldn't happen (because of validation earlier), but be sure */
-
- goto InvalidResource;
- }
-
- AmlResource = ACPI_CAST_PTR (AML_RESOURCE, Aml);
- if (ResourceType == ACPI_RESOURCE_NAME_SERIAL_BUS)
- {
- /* Validate the BusType field */
-
- if ((AmlResource->CommonSerialBus.Type == 0) ||
- (AmlResource->CommonSerialBus.Type > AML_RESOURCE_MAX_SERIALBUSTYPE))
- {
- if (WalkState)
- {
- ACPI_ERROR ((AE_INFO,
- "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X",
- AmlResource->CommonSerialBus.Type));
- }
- return (AE_AML_INVALID_RESOURCE_TYPE);
- }
- }
-
- /* Optionally return the resource table index */
-
- if (ReturnIndex)
- {
- *ReturnIndex = ResourceIndex;
- }
-
- return (AE_OK);
-
-
-InvalidResource:
-
- if (WalkState)
- {
- ACPI_ERROR ((AE_INFO,
- "Invalid/unsupported resource descriptor: Type 0x%2.2X",
- ResourceType));
- }
- return (AE_AML_INVALID_RESOURCE_TYPE);
-
-BadResourceLength:
-
- if (WalkState)
- {
- ACPI_ERROR ((AE_INFO,
- "Invalid resource descriptor length: Type "
- "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X",
- ResourceType, ResourceLength, MinimumResourceLength));
- }
- return (AE_AML_BAD_RESOURCE_LENGTH);
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtGetResourceType
- *
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
- *
- * RETURN: The Resource Type with no extraneous bits (except the
- * Large/Small descriptor bit -- this is left alone)
- *
- * DESCRIPTION: Extract the Resource Type/Name from the first byte of
- * a resource descriptor.
- *
- ******************************************************************************/
-
-UINT8
-AcpiUtGetResourceType (
- void *Aml)
-{
- ACPI_FUNCTION_ENTRY ();
-
-
- /*
- * Byte 0 contains the descriptor name (Resource Type)
- * Examine the large/small bit in the resource header
- */
- if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
- {
- /* Large Resource Type -- bits 6:0 contain the name */
-
- return (ACPI_GET8 (Aml));
- }
- else
- {
- /* Small Resource Type -- bits 6:3 contain the name */
-
- return ((UINT8) (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_SMALL_MASK));
- }
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtGetResourceLength
- *
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
- *
- * RETURN: Byte Length
- *
- * DESCRIPTION: Get the "Resource Length" of a raw AML descriptor. By
- * definition, this does not include the size of the descriptor
- * header or the length field itself.
- *
- ******************************************************************************/
-
-UINT16
-AcpiUtGetResourceLength (
- void *Aml)
-{
- ACPI_RS_LENGTH ResourceLength;
-
-
- ACPI_FUNCTION_ENTRY ();
-
-
- /*
- * Byte 0 contains the descriptor name (Resource Type)
- * Examine the large/small bit in the resource header
- */
- if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
- {
- /* Large Resource type -- bytes 1-2 contain the 16-bit length */
-
- ACPI_MOVE_16_TO_16 (&ResourceLength, ACPI_ADD_PTR (UINT8, Aml, 1));
-
- }
- else
- {
- /* Small Resource type -- bits 2:0 of byte 0 contain the length */
-
- ResourceLength = (UINT16) (ACPI_GET8 (Aml) &
- ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK);
- }
-
- return (ResourceLength);
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtGetResourceHeaderLength
- *
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
- *
- * RETURN: Length of the AML header (depends on large/small descriptor)
- *
- * DESCRIPTION: Get the length of the header for this resource.
- *
- ******************************************************************************/
-
-UINT8
-AcpiUtGetResourceHeaderLength (
- void *Aml)
-{
- ACPI_FUNCTION_ENTRY ();
-
-
- /* Examine the large/small bit in the resource header */
-
- if (ACPI_GET8 (Aml) & ACPI_RESOURCE_NAME_LARGE)
- {
- return (sizeof (AML_RESOURCE_LARGE_HEADER));
- }
- else
- {
- return (sizeof (AML_RESOURCE_SMALL_HEADER));
- }
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtGetDescriptorLength
- *
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
- *
- * RETURN: Byte length
- *
- * DESCRIPTION: Get the total byte length of a raw AML descriptor, including the
- * length of the descriptor header and the length field itself.
- * Used to walk descriptor lists.
- *
- ******************************************************************************/
-
-UINT32
-AcpiUtGetDescriptorLength (
- void *Aml)
-{
- ACPI_FUNCTION_ENTRY ();
-
-
- /*
- * Get the Resource Length (does not include header length) and add
- * the header length (depends on if this is a small or large resource)
- */
- return (AcpiUtGetResourceLength (Aml) +
- AcpiUtGetResourceHeaderLength (Aml));
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtGetResourceEndTag
- *
- * PARAMETERS: ObjDesc - The resource template buffer object
- * EndTag - Where the pointer to the EndTag is returned
- *
- * RETURN: Status, pointer to the end tag
- *
- * DESCRIPTION: Find the EndTag resource descriptor in an AML resource template
- * Note: allows a buffer length of zero.
- *
- ******************************************************************************/
-
-ACPI_STATUS
-AcpiUtGetResourceEndTag (
- ACPI_OPERAND_OBJECT *ObjDesc,
- UINT8 **EndTag)
-{
- ACPI_STATUS Status;
-
-
- ACPI_FUNCTION_TRACE (UtGetResourceEndTag);
-
-
- /* Allow a buffer length of zero */
-
- if (!ObjDesc->Buffer.Length)
- {
- *EndTag = ObjDesc->Buffer.Pointer;
- return_ACPI_STATUS (AE_OK);
- }
-
- /* Validate the template and get a pointer to the EndTag */
-
- Status = AcpiUtWalkAmlResources (NULL, ObjDesc->Buffer.Pointer,
- ObjDesc->Buffer.Length, NULL, (void **) EndTag);
-
- return_ACPI_STATUS (Status);
-}