ACPI_MODULE_NAME ("utresrc")
-#if defined(ACPI_DEBUG_OUTPUT) || defined (ACPI_DISASSEMBLER) || defined (ACPI_DEBUGGER)
-
-/*
- * Strings used to decode resource descriptors.
- * Used by both the disassembler and the debugger resource dump routines
- */
-const char *AcpiGbl_BmDecode[] =
-{
- "NotBusMaster",
- "BusMaster"
-};
-
-const char *AcpiGbl_ConfigDecode[] =
-{
- "0 - Good Configuration",
- "1 - Acceptable Configuration",
- "2 - Suboptimal Configuration",
- "3 - ***Invalid Configuration***",
-};
-
-const char *AcpiGbl_ConsumeDecode[] =
-{
- "ResourceProducer",
- "ResourceConsumer"
-};
-
-const char *AcpiGbl_DecDecode[] =
-{
- "PosDecode",
- "SubDecode"
-};
-
-const char *AcpiGbl_HeDecode[] =
-{
- "Level",
- "Edge"
-};
-
-const char *AcpiGbl_IoDecode[] =
-{
- "Decode10",
- "Decode16"
-};
-
-const char *AcpiGbl_LlDecode[] =
-{
- "ActiveHigh",
- "ActiveLow",
- "ActiveBoth",
- "Reserved"
-};
-
-const char *AcpiGbl_MaxDecode[] =
-{
- "MaxNotFixed",
- "MaxFixed"
-};
-
-const char *AcpiGbl_MemDecode[] =
-{
- "NonCacheable",
- "Cacheable",
- "WriteCombining",
- "Prefetchable"
-};
-
-const char *AcpiGbl_MinDecode[] =
-{
- "MinNotFixed",
- "MinFixed"
-};
-
-const char *AcpiGbl_MtpDecode[] =
-{
- "AddressRangeMemory",
- "AddressRangeReserved",
- "AddressRangeACPI",
- "AddressRangeNVS"
-};
-
-const char *AcpiGbl_RngDecode[] =
-{
- "InvalidRanges",
- "NonISAOnlyRanges",
- "ISAOnlyRanges",
- "EntireRange"
-};
-
-const char *AcpiGbl_RwDecode[] =
-{
- "ReadOnly",
- "ReadWrite"
-};
-
-const char *AcpiGbl_ShrDecode[] =
-{
- "Exclusive",
- "Shared",
- "ExclusiveAndWake", /* ACPI 5.0 */
- "SharedAndWake" /* ACPI 5.0 */
-};
-
-const char *AcpiGbl_SizDecode[] =
-{
- "Transfer8",
- "Transfer8_16",
- "Transfer16",
- "InvalidSize"
-};
-
-const char *AcpiGbl_TrsDecode[] =
-{
- "DenseTranslation",
- "SparseTranslation"
-};
-
-const char *AcpiGbl_TtpDecode[] =
-{
- "TypeStatic",
- "TypeTranslation"
-};
-
-const char *AcpiGbl_TypDecode[] =
-{
- "Compatibility",
- "TypeA",
- "TypeB",
- "TypeF"
-};
-
-const char *AcpiGbl_PpcDecode[] =
-{
- "PullDefault",
- "PullUp",
- "PullDown",
- "PullNone"
-};
-
-const char *AcpiGbl_IorDecode[] =
-{
- "IoRestrictionNone",
- "IoRestrictionInputOnly",
- "IoRestrictionOutputOnly",
- "IoRestrictionNoneAndPreserve"
-};
-
-const char *AcpiGbl_DtsDecode[] =
-{
- "Width8bit",
- "Width16bit",
- "Width32bit",
- "Width64bit",
- "Width128bit",
- "Width256bit",
-};
-
-/* GPIO connection type */
-
-const char *AcpiGbl_CtDecode[] =
-{
- "Interrupt",
- "I/O"
-};
-
-/* Serial bus type */
-
-const char *AcpiGbl_SbtDecode[] =
-{
- "/* UNKNOWN serial bus type */",
- "I2C",
- "SPI",
- "UART"
-};
-
-/* I2C serial bus access mode */
-
-const char *AcpiGbl_AmDecode[] =
-{
- "AddressingMode7Bit",
- "AddressingMode10Bit"
-};
-
-/* I2C serial bus slave mode */
-
-const char *AcpiGbl_SmDecode[] =
-{
- "ControllerInitiated",
- "DeviceInitiated"
-};
-
-/* SPI serial bus wire mode */
-
-const char *AcpiGbl_WmDecode[] =
-{
- "FourWireMode",
- "ThreeWireMode"
-};
-
-/* SPI serial clock phase */
-
-const char *AcpiGbl_CphDecode[] =
-{
- "ClockPhaseFirst",
- "ClockPhaseSecond"
-};
-
-/* SPI serial bus clock polarity */
-
-const char *AcpiGbl_CpoDecode[] =
-{
- "ClockPolarityLow",
- "ClockPolarityHigh"
-};
-
-/* SPI serial bus device polarity */
-
-const char *AcpiGbl_DpDecode[] =
-{
- "PolarityLow",
- "PolarityHigh"
-};
-
-/* UART serial bus endian */
-
-const char *AcpiGbl_EdDecode[] =
-{
- "LittleEndian",
- "BigEndian"
-};
-
-/* UART serial bus bits per byte */
-
-const char *AcpiGbl_BpbDecode[] =
-{
- "DataBitsFive",
- "DataBitsSix",
- "DataBitsSeven",
- "DataBitsEight",
- "DataBitsNine",
- "/* UNKNOWN Bits per byte */",
- "/* UNKNOWN Bits per byte */",
- "/* UNKNOWN Bits per byte */"
-};
-
-/* UART serial bus stop bits */
-
-const char *AcpiGbl_SbDecode[] =
-{
- "StopBitsZero",
- "StopBitsOne",
- "StopBitsOnePlusHalf",
- "StopBitsTwo"
-};
-
-/* UART serial bus flow control */
-
-const char *AcpiGbl_FcDecode[] =
-{
- "FlowControlNone",
- "FlowControlHardware",
- "FlowControlXON",
- "/* UNKNOWN flow control keyword */"
-};
-
-/* UART serial bus parity type */
-
-const char *AcpiGbl_PtDecode[] =
-{
- "ParityTypeNone",
- "ParityTypeEven",
- "ParityTypeOdd",
- "ParityTypeMark",
- "ParityTypeSpace",
- "/* UNKNOWN parity keyword */",
- "/* UNKNOWN parity keyword */",
- "/* UNKNOWN parity keyword */"
-};
-
-#endif
-
-
/*
* Base sizes of the raw AML resource descriptors, indexed by resource type.
* Zero indicates a reserved (and therefore invalid) resource type.
ACPI_AML_SIZE_LARGE (AML_RESOURCE_ADDRESS64),
ACPI_AML_SIZE_LARGE (AML_RESOURCE_EXTENDED_ADDRESS64),
ACPI_AML_SIZE_LARGE (AML_RESOURCE_GPIO),
- 0,
+ ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_FUNCTION),
ACPI_AML_SIZE_LARGE (AML_RESOURCE_COMMON_SERIALBUS),
+ ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_CONFIG),
+ ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_GROUP),
+ ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_GROUP_FUNCTION),
+ ACPI_AML_SIZE_LARGE (AML_RESOURCE_PIN_GROUP_CONFIG),
};
const UINT8 AcpiGbl_ResourceAmlSerialBusSizes[] =
ACPI_VARIABLE_LENGTH, /* 0A Qword* address */
ACPI_FIXED_LENGTH, /* 0B Extended* address */
ACPI_VARIABLE_LENGTH, /* 0C Gpio* */
- 0,
- ACPI_VARIABLE_LENGTH /* 0E *SerialBus */
+ ACPI_VARIABLE_LENGTH, /* 0D PinFunction */
+ ACPI_VARIABLE_LENGTH, /* 0E *SerialBus */
+ ACPI_VARIABLE_LENGTH, /* 0F PinConfig */
+ ACPI_VARIABLE_LENGTH, /* 10 PinGroup */
+ ACPI_VARIABLE_LENGTH, /* 11 PinGroupFunction */
+ ACPI_VARIABLE_LENGTH, /* 12 PinGroupConfig */
};
* The absolute minimum resource template is one EndTag descriptor.
* However, we will treat a lone EndTag as just a simple buffer.
*/
- if (AmlLength < sizeof (AML_RESOURCE_END_TAG))
+ if (AmlLength <= sizeof (AML_RESOURCE_END_TAG))
{
return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
}
if (UserFunction)
{
- Status = UserFunction (Aml, Length, Offset,
- ResourceIndex, Context);
+ Status = UserFunction (
+ Aml, Length, Offset, ResourceIndex, Context);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
*Context = Aml;
}
- /* Check if buffer is defined to be longer than the resource length */
-
- if (AmlLength > (Offset + Length))
- {
- return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
- }
-
- /* Normal exit */
-
+ /*
+ * Normal exit. Note: We allow the buffer to be larger than
+ * the resource template, as long as the END_TAG exists.
+ */
return_ACPI_STATUS (AE_OK);
}