Copyright Jason Filby (jasonfilby@yahoo.com)
Copyright Martijn Vernooij (o112w8r02@sneakemail.com)
Copyright 2006-2007 Hervé Poussineau (hpoussin@reactos.org)
+ Copyright 2008 Colin Finck (mail@colinfinck.de)
*/
/* INCLUDES ****************************************************************/
(DeviceExtension->MouseButtonState & ~Mask) | (NewButtonData & Mask);
}
-static NTSTATUS OldInitialization(PPORT_DEVICE_EXTENSION); /* FIXME */
-
/* Does lastest initializations for the mouse. This method
* is called just before connecting the interrupt.
*/
i8042MouInitialize(
IN PI8042_MOUSE_EXTENSION DeviceExtension)
{
- PPORT_DEVICE_EXTENSION PortDeviceExtension;
+ NTSTATUS Status;
+ UCHAR Value;
- PortDeviceExtension = DeviceExtension->Common.PortDeviceExtension;
+ /* Enable the PS/2 mouse port */
+ i8042Write(DeviceExtension->Common.PortDeviceExtension, DeviceExtension->Common.PortDeviceExtension->ControlPort, MOUSE_ENAB);
+
+ /* Enable the mouse */
+ if(!i8042IsrWritePort(DeviceExtension->Common.PortDeviceExtension, MOU_ENAB, CTRL_WRITE_MOUSE))
+ {
+ WARN_(I8042PRT, "Failed to enable mouse!\n");
+ return STATUS_IO_DEVICE_ERROR;
+ }
+
+ Status = i8042ReadDataWait(DeviceExtension->Common.PortDeviceExtension, &Value);
+ if (!NT_SUCCESS(Status))
+ {
+ WARN_(I8042PRT, "Failed to read the response of MOU_ENAB, status 0x%08lx\n", Status);
+ return Status;
+ }
-/* FIXME */ OldInitialization(PortDeviceExtension);
+ if(Value == MOUSE_ACK)
+ {
+ INFO_(I8042PRT, "Mouse was enabled successfully!\n");
+ return STATUS_SUCCESS;
+ }
- return STATUS_SUCCESS;
+ WARN_(I8042PRT, "Got 0x%02x instead of 0xFA\n", Value);
+ return STATUS_IO_DEVICE_ERROR;
}
static VOID NTAPI
return TRUE;
}
-
-/****************************************************************************************
- * WARNING: the mouse initialization code has been taken from old ReactOS mouse driver, *
- * named psaux.sys, which has been deleted in revision 14938. *
- * Coding style and structures are not exactly the same as in the other parts of the *
- * i8042prt driver, but code is supposed to work. *
- ****************************************************************************************/
-
-#define CONTROLLER_COMMAND_MOUSE_ENABLE 0xA8
-#define PSMOUSE_CMD_ENABLE 0x00f4
-#define PSMOUSE_CMD_GETID (0x0200 | MOU_CMD_GET_ID)
-#define PSMOUSE_CMD_RESET_BAT (0x0200 | MOU_CMD_RESET)
-#define PSMOUSE_RET_ACK MOUSE_ACK
-#define PSMOUSE_RET_NAK MOUSE_NACK
-
-typedef struct _I8042_MOUSE_EXTENSION_OLD
-{
- PPORT_DEVICE_EXTENSION PortDeviceExtension;
- UCHAR pkt[8];
- UCHAR ack;
- ULONG RepliesExpected;
-} I8042_MOUSE_EXTENSION_OLD, *PI8042_MOUSE_EXTENSION_OLD;
-
-/* Sends a byte to the mouse */
-static INT SendByte(
- IN PI8042_MOUSE_EXTENSION_OLD DeviceExtension,
- IN UCHAR byte)
-{
- INT timeout = 100; /* 100 msec */
- UCHAR scancode;
- LARGE_INTEGER Millisecond_Timeout;
-
- Millisecond_Timeout.QuadPart = -10000L;
-
- DeviceExtension->ack = 0;
-
- i8042IsrWritePort(DeviceExtension->PortDeviceExtension, byte, CTRL_WRITE_MOUSE);
- while ((DeviceExtension->ack == 0) && timeout--)
- {
- if (i8042ReadKeyboardData(DeviceExtension->PortDeviceExtension, &scancode))
- {
- switch(scancode)
- {
- case PSMOUSE_RET_ACK:
- DeviceExtension->ack = 1;
- break;
- case PSMOUSE_RET_NAK:
- DeviceExtension->ack = -1;
- break;
- default:
- DeviceExtension->ack = 1; /* Workaround for mice which don't ACK the Get ID command */
- if (DeviceExtension->RepliesExpected)
- DeviceExtension->pkt[--DeviceExtension->RepliesExpected] = scancode;
- break;
- }
- return (INT)(-(DeviceExtension->ack <= 0));
- }
- KeDelayExecutionThread(KernelMode, FALSE, &Millisecond_Timeout);
- }
- return (INT)(-(DeviceExtension->ack <= 0));
-}
-
-/* Send a PS/2 command to the mouse. */
-static INT SendCommand(
- IN PI8042_MOUSE_EXTENSION_OLD DeviceExtension,
- IN PUCHAR param,
- IN INT command)
-{
- LARGE_INTEGER Millisecond_Timeout;
- UCHAR scancode;
- INT timeout = 500; /* 500 msec */
- UCHAR send = (command >> 12) & 0xf;
- UCHAR receive = (command >> 8) & 0xf;
- UCHAR i;
-
- Millisecond_Timeout.QuadPart = -10000L;
-
- DeviceExtension->RepliesExpected = receive;
- if (command == PSMOUSE_CMD_RESET_BAT)
- timeout = 2000; /* 2 sec */
-
- if (command & 0xff)
- if (SendByte(DeviceExtension, command & 0xff))
- return (INT)(DeviceExtension->RepliesExpected = 0) - 1;
-
- for (i = 0; i < send; i++)
- if (SendByte(DeviceExtension, param[i]))
- return (INT)(DeviceExtension->RepliesExpected = 0) - 1;
-
- while (DeviceExtension->RepliesExpected && timeout--)
- {
- if (DeviceExtension->RepliesExpected == 1 && command == PSMOUSE_CMD_RESET_BAT)
- timeout = 100;
-
- if (DeviceExtension->RepliesExpected == 1 && command == PSMOUSE_CMD_GETID &&
- DeviceExtension->pkt[1] != 0xab && DeviceExtension->pkt[1] != 0xac)
- {
- DeviceExtension->RepliesExpected = 0;
- break;
- }
-
- if (i8042ReadKeyboardData(DeviceExtension->PortDeviceExtension, &scancode))
- {
- DeviceExtension->pkt[--DeviceExtension->RepliesExpected] = scancode;
- }
-
- KeDelayExecutionThread (KernelMode, FALSE, &Millisecond_Timeout);
- }
-
- for (i = 0; i < receive; i++)
- param[i] = DeviceExtension->pkt[(receive - 1) - i];
-
- if (DeviceExtension->RepliesExpected)
- return (int)(DeviceExtension->RepliesExpected = 0) - 1;
-
- return 0;
-}
-
-/* Detect if mouse is just a standard ps/2 mouse */
-static BOOLEAN TestMouse(
- IN PI8042_MOUSE_EXTENSION_OLD DeviceExtension)
-{
- UCHAR param[4];
-
- param[0] = param[1] = 0xa5;
-
- /*
- * First, we check if it's a mouse. It should send 0x00 or 0x03
- * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer.
- */
- if(SendCommand(DeviceExtension, param, PSMOUSE_CMD_GETID))
- return -1;
-
- if(param[0] != 0x00 && param[0] != 0x03 && param[0] != 0x04)
- return -1;
-
- /*
- * Then we reset and disable the mouse so that it doesn't generate events.
- */
-
- return TRUE;
-}
-
-/* Initialize the PS/2 mouse support */
-static BOOLEAN SetupMouse(
- IN PI8042_MOUSE_EXTENSION_OLD DeviceExtension)
-{
- LARGE_INTEGER Millisecond_Timeout;
-
- Millisecond_Timeout.QuadPart = -10000L;
-
- /* setup */
- DeviceExtension->RepliesExpected = 0;
- DeviceExtension->ack = 0;
-
- /* Enable the PS/2 mouse port */
- i8042Write(DeviceExtension->PortDeviceExtension, DeviceExtension->PortDeviceExtension->ControlPort, CONTROLLER_COMMAND_MOUSE_ENABLE);
-
- if (TestMouse(DeviceExtension))
- {
- TRACE_(I8042PRT, "Detected Mouse\n");
-
- if (SendCommand(DeviceExtension, NULL, PSMOUSE_CMD_ENABLE))
- WARN_(I8042PRT, "Failed to enable mouse!\n");
- }
-
- return TRUE;
-}
-
-static NTSTATUS OldInitialization(
- IN PPORT_DEVICE_EXTENSION PortDeviceExtension)
-{
- I8042_MOUSE_EXTENSION_OLD DeviceExtension;
-
- RtlZeroMemory(&DeviceExtension, sizeof(I8042_MOUSE_EXTENSION_OLD));
- DeviceExtension.PortDeviceExtension = PortDeviceExtension;
- SetupMouse(&DeviceExtension);
- return STATUS_SUCCESS;
-}
projects / reactos.git / commitdiff