reactos/drivers/bus/acpi/acpica/namespace/nsobject.c

   1 /*******************************************************************************
   2  *
   3  * Module Name: nsobject - Utilities for objects attached to namespace
   4  *                         table entries
   5  *
   6  ******************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2016, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include "acpi.h"
  46 #include "accommon.h"
  47 #include "acnamesp.h"
  48
  49
  50 #define _COMPONENT          ACPI_NAMESPACE
  51         ACPI_MODULE_NAME    ("nsobject")
  52
  53
  54 /*******************************************************************************
  55  *
  56  * FUNCTION:    AcpiNsAttachObject
  57  *
  58  * PARAMETERS:  Node                - Parent Node
  59  *              Object              - Object to be attached
  60  *              Type                - Type of object, or ACPI_TYPE_ANY if not
  61  *                                    known
  62  *
  63  * RETURN:      Status
  64  *
  65  * DESCRIPTION: Record the given object as the value associated with the
  66  *              name whose ACPI_HANDLE is passed. If Object is NULL
  67  *              and Type is ACPI_TYPE_ANY, set the name as having no value.
  68  *              Note: Future may require that the Node->Flags field be passed
  69  *              as a parameter.
  70  *
  71  * MUTEX:       Assumes namespace is locked
  72  *
  73  ******************************************************************************/
  74
  75 ACPI_STATUS
  76 AcpiNsAttachObject (
  77     ACPI_NAMESPACE_NODE     *Node,
  78     ACPI_OPERAND_OBJECT     *Object,
  79     ACPI_OBJECT_TYPE        Type)
  80 {
  81     ACPI_OPERAND_OBJECT     *ObjDesc;
  82     ACPI_OPERAND_OBJECT     *LastObjDesc;
  83     ACPI_OBJECT_TYPE        ObjectType = ACPI_TYPE_ANY;
  84
  85
  86     ACPI_FUNCTION_TRACE (NsAttachObject);
  87
  88
  89     /*
  90      * Parameter validation
  91      */
  92     if (!Node)
  93     {
  94         /* Invalid handle */
  95
  96         ACPI_ERROR ((AE_INFO, "Null NamedObj handle"));
  97         return_ACPI_STATUS (AE_BAD_PARAMETER);
  98     }
  99
 100     if (!Object && (ACPI_TYPE_ANY != Type))
 101     {
 102         /* Null object */
 103
 104         ACPI_ERROR ((AE_INFO,
 105             "Null object, but type not ACPI_TYPE_ANY"));
 106         return_ACPI_STATUS (AE_BAD_PARAMETER);
 107     }
 108
 109     if (ACPI_GET_DESCRIPTOR_TYPE (Node) != ACPI_DESC_TYPE_NAMED)
 110     {
 111         /* Not a name handle */
 112
 113         ACPI_ERROR ((AE_INFO, "Invalid handle %p [%s]",
 114             Node, AcpiUtGetDescriptorName (Node)));
 115         return_ACPI_STATUS (AE_BAD_PARAMETER);
 116     }
 117
 118     /* Check if this object is already attached */
 119
 120     if (Node->Object == Object)
 121     {
 122         ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 123             "Obj %p already installed in NameObj %p\n",
 124             Object, Node));
 125
 126         return_ACPI_STATUS (AE_OK);
 127     }
 128
 129     /* If null object, we will just install it */
 130
 131     if (!Object)
 132     {
 133         ObjDesc    = NULL;
 134         ObjectType = ACPI_TYPE_ANY;
 135     }
 136
 137     /*
 138      * If the source object is a namespace Node with an attached object,
 139      * we will use that (attached) object
 140      */
 141     else if ((ACPI_GET_DESCRIPTOR_TYPE (Object) == ACPI_DESC_TYPE_NAMED) &&
 142             ((ACPI_NAMESPACE_NODE *) Object)->Object)
 143     {
 144         /*
 145          * Value passed is a name handle and that name has a
 146          * non-null value. Use that name's value and type.
 147          */
 148         ObjDesc = ((ACPI_NAMESPACE_NODE *) Object)->Object;
 149         ObjectType = ((ACPI_NAMESPACE_NODE *) Object)->Type;
 150     }
 151
 152     /*
 153      * Otherwise, we will use the parameter object, but we must type
 154      * it first
 155      */
 156     else
 157     {
 158         ObjDesc = (ACPI_OPERAND_OBJECT  *) Object;
 159
 160         /* Use the given type */
 161
 162         ObjectType = Type;
 163     }
 164
 165     ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Installing %p into Node %p [%4.4s]\n",
 166         ObjDesc, Node, AcpiUtGetNodeName (Node)));
 167
 168     /* Detach an existing attached object if present */
 169
 170     if (Node->Object)
 171     {
 172         AcpiNsDetachObject (Node);
 173     }
 174
 175     if (ObjDesc)
 176     {
 177         /*
 178          * Must increment the new value's reference count
 179          * (if it is an internal object)
 180          */
 181         AcpiUtAddReference (ObjDesc);
 182
 183         /*
 184          * Handle objects with multiple descriptors - walk
 185          * to the end of the descriptor list
 186          */
 187         LastObjDesc = ObjDesc;
 188         while (LastObjDesc->Common.NextObject)
 189         {
 190             LastObjDesc = LastObjDesc->Common.NextObject;
 191         }
 192
 193         /* Install the object at the front of the object list */
 194
 195         LastObjDesc->Common.NextObject = Node->Object;
 196     }
 197
 198     Node->Type = (UINT8) ObjectType;
 199     Node->Object = ObjDesc;
 200
 201     return_ACPI_STATUS (AE_OK);
 202 }
 203
 204
 205 /*******************************************************************************
 206  *
 207  * FUNCTION:    AcpiNsDetachObject
 208  *
 209  * PARAMETERS:  Node           - A Namespace node whose object will be detached
 210  *
 211  * RETURN:      None.
 212  *
 213  * DESCRIPTION: Detach/delete an object associated with a namespace node.
 214  *              if the object is an allocated object, it is freed.
 215  *              Otherwise, the field is simply cleared.
 216  *
 217  ******************************************************************************/
 218
 219 void
 220 AcpiNsDetachObject (
 221     ACPI_NAMESPACE_NODE     *Node)
 222 {
 223     ACPI_OPERAND_OBJECT     *ObjDesc;
 224
 225
 226     ACPI_FUNCTION_TRACE (NsDetachObject);
 227
 228
 229     ObjDesc = Node->Object;
 230
 231     if (!ObjDesc ||
 232         (ObjDesc->Common.Type == ACPI_TYPE_LOCAL_DATA))
 233     {
 234         return_VOID;
 235     }
 236
 237     if (Node->Flags & ANOBJ_ALLOCATED_BUFFER)
 238     {
 239         /* Free the dynamic aml buffer */
 240
 241         if (ObjDesc->Common.Type == ACPI_TYPE_METHOD)
 242         {
 243             ACPI_FREE (ObjDesc->Method.AmlStart);
 244         }
 245     }
 246
 247     /* Clear the Node entry in all cases */
 248
 249     Node->Object = NULL;
 250     if (ACPI_GET_DESCRIPTOR_TYPE (ObjDesc) == ACPI_DESC_TYPE_OPERAND)
 251     {
 252         /* Unlink object from front of possible object list */
 253
 254         Node->Object = ObjDesc->Common.NextObject;
 255
 256         /* Handle possible 2-descriptor object */
 257
 258         if (Node->Object &&
 259            (Node->Object->Common.Type != ACPI_TYPE_LOCAL_DATA))
 260         {
 261             Node->Object = Node->Object->Common.NextObject;
 262         }
 263
 264         /*
 265          * Detach the object from any data objects (which are still held by
 266          * the namespace node)
 267          */
 268         if (ObjDesc->Common.NextObject &&
 269            ((ObjDesc->Common.NextObject)->Common.Type == ACPI_TYPE_LOCAL_DATA))
 270         {
 271            ObjDesc->Common.NextObject = NULL;
 272         }
 273     }
 274
 275     /* Reset the node type to untyped */
 276
 277     Node->Type = ACPI_TYPE_ANY;
 278
 279     ACPI_DEBUG_PRINT ((ACPI_DB_NAMES, "Node %p [%4.4s] Object %p\n",
 280         Node, AcpiUtGetNodeName (Node), ObjDesc));
 281
 282     /* Remove one reference on the object (and all subobjects) */
 283
 284     AcpiUtRemoveReference (ObjDesc);
 285     return_VOID;
 286 }
 287
 288
 289 /*******************************************************************************
 290  *
 291  * FUNCTION:    AcpiNsGetAttachedObject
 292  *
 293  * PARAMETERS:  Node             - Namespace node
 294  *
 295  * RETURN:      Current value of the object field from the Node whose
 296  *              handle is passed
 297  *
 298  * DESCRIPTION: Obtain the object attached to a namespace node.
 299  *
 300  ******************************************************************************/
 301
 302 ACPI_OPERAND_OBJECT *
 303 AcpiNsGetAttachedObject (
 304     ACPI_NAMESPACE_NODE     *Node)
 305 {
 306     ACPI_FUNCTION_TRACE_PTR (NsGetAttachedObject, Node);
 307
 308
 309     if (!Node)
 310     {
 311         ACPI_WARNING ((AE_INFO, "Null Node ptr"));
 312         return_PTR (NULL);
 313     }
 314
 315     if (!Node->Object ||
 316             ((ACPI_GET_DESCRIPTOR_TYPE (Node->Object) != ACPI_DESC_TYPE_OPERAND) &&
 317              (ACPI_GET_DESCRIPTOR_TYPE (Node->Object) != ACPI_DESC_TYPE_NAMED))  ||
 318         ((Node->Object)->Common.Type == ACPI_TYPE_LOCAL_DATA))
 319     {
 320         return_PTR (NULL);
 321     }
 322
 323     return_PTR (Node->Object);
 324 }
 325
 326
 327 /*******************************************************************************
 328  *
 329  * FUNCTION:    AcpiNsGetSecondaryObject
 330  *
 331  * PARAMETERS:  Node             - Namespace node
 332  *
 333  * RETURN:      Current value of the object field from the Node whose
 334  *              handle is passed.
 335  *
 336  * DESCRIPTION: Obtain a secondary object associated with a namespace node.
 337  *
 338  ******************************************************************************/
 339
 340 ACPI_OPERAND_OBJECT *
 341 AcpiNsGetSecondaryObject (
 342     ACPI_OPERAND_OBJECT     *ObjDesc)
 343 {
 344     ACPI_FUNCTION_TRACE_PTR (NsGetSecondaryObject, ObjDesc);
 345
 346
 347     if ((!ObjDesc)                                     ||
 348         (ObjDesc->Common.Type== ACPI_TYPE_LOCAL_DATA)  ||
 349         (!ObjDesc->Common.NextObject)                  ||
 350         ((ObjDesc->Common.NextObject)->Common.Type == ACPI_TYPE_LOCAL_DATA))
 351     {
 352         return_PTR (NULL);
 353     }
 354
 355     return_PTR (ObjDesc->Common.NextObject);
 356 }
 357
 358
 359 /*******************************************************************************
 360  *
 361  * FUNCTION:    AcpiNsAttachData
 362  *
 363  * PARAMETERS:  Node            - Namespace node
 364  *              Handler         - Handler to be associated with the data
 365  *              Data            - Data to be attached
 366  *
 367  * RETURN:      Status
 368  *
 369  * DESCRIPTION: Low-level attach data. Create and attach a Data object.
 370  *
 371  ******************************************************************************/
 372
 373 ACPI_STATUS
 374 AcpiNsAttachData (
 375     ACPI_NAMESPACE_NODE     *Node,
 376     ACPI_OBJECT_HANDLER     Handler,
 377     void                    *Data)
 378 {
 379     ACPI_OPERAND_OBJECT     *PrevObjDesc;
 380     ACPI_OPERAND_OBJECT     *ObjDesc;
 381     ACPI_OPERAND_OBJECT     *DataDesc;
 382
 383
 384     /* We only allow one attachment per handler */
 385
 386     PrevObjDesc = NULL;
 387     ObjDesc = Node->Object;
 388     while (ObjDesc)
 389     {
 390         if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_DATA) &&
 391             (ObjDesc->Data.Handler == Handler))
 392         {
 393             return (AE_ALREADY_EXISTS);
 394         }
 395
 396         PrevObjDesc = ObjDesc;
 397         ObjDesc = ObjDesc->Common.NextObject;
 398     }
 399
 400     /* Create an internal object for the data */
 401
 402     DataDesc = AcpiUtCreateInternalObject (ACPI_TYPE_LOCAL_DATA);
 403     if (!DataDesc)
 404     {
 405         return (AE_NO_MEMORY);
 406     }
 407
 408     DataDesc->Data.Handler = Handler;
 409     DataDesc->Data.Pointer = Data;
 410
 411     /* Install the data object */
 412
 413     if (PrevObjDesc)
 414     {
 415         PrevObjDesc->Common.NextObject = DataDesc;
 416     }
 417     else
 418     {
 419         Node->Object = DataDesc;
 420     }
 421
 422     return (AE_OK);
 423 }
 424
 425
 426 /*******************************************************************************
 427  *
 428  * FUNCTION:    AcpiNsDetachData
 429  *
 430  * PARAMETERS:  Node            - Namespace node
 431  *              Handler         - Handler associated with the data
 432  *
 433  * RETURN:      Status
 434  *
 435  * DESCRIPTION: Low-level detach data. Delete the data node, but the caller
 436  *              is responsible for the actual data.
 437  *
 438  ******************************************************************************/
 439
 440 ACPI_STATUS
 441 AcpiNsDetachData (
 442     ACPI_NAMESPACE_NODE     *Node,
 443     ACPI_OBJECT_HANDLER     Handler)
 444 {
 445     ACPI_OPERAND_OBJECT     *ObjDesc;
 446     ACPI_OPERAND_OBJECT     *PrevObjDesc;
 447
 448
 449     PrevObjDesc = NULL;
 450     ObjDesc = Node->Object;
 451     while (ObjDesc)
 452     {
 453         if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_DATA) &&
 454             (ObjDesc->Data.Handler == Handler))
 455         {
 456             if (PrevObjDesc)
 457             {
 458                 PrevObjDesc->Common.NextObject = ObjDesc->Common.NextObject;
 459             }
 460             else
 461             {
 462                 Node->Object = ObjDesc->Common.NextObject;
 463             }
 464
 465             AcpiUtRemoveReference (ObjDesc);
 466             return (AE_OK);
 467         }
 468
 469         PrevObjDesc = ObjDesc;
 470         ObjDesc = ObjDesc->Common.NextObject;
 471     }
 472
 473     return (AE_NOT_FOUND);
 474 }
 475
 476
 477 /*******************************************************************************
 478  *
 479  * FUNCTION:    AcpiNsGetAttachedData
 480  *
 481  * PARAMETERS:  Node            - Namespace node
 482  *              Handler         - Handler associated with the data
 483  *              Data            - Where the data is returned
 484  *
 485  * RETURN:      Status
 486  *
 487  * DESCRIPTION: Low level interface to obtain data previously associated with
 488  *              a namespace node.
 489  *
 490  ******************************************************************************/
 491
 492 ACPI_STATUS
 493 AcpiNsGetAttachedData (
 494     ACPI_NAMESPACE_NODE     *Node,
 495     ACPI_OBJECT_HANDLER     Handler,
 496     void                    **Data)
 497 {
 498     ACPI_OPERAND_OBJECT     *ObjDesc;
 499
 500
 501     ObjDesc = Node->Object;
 502     while (ObjDesc)
 503     {
 504         if ((ObjDesc->Common.Type == ACPI_TYPE_LOCAL_DATA) &&
 505             (ObjDesc->Data.Handler == Handler))
 506         {
 507             *Data = ObjDesc->Data.Pointer;
 508             return (AE_OK);
 509         }
 510
 511         ObjDesc = ObjDesc->Common.NextObject;
 512     }
 513
 514     return (AE_NOT_FOUND);
 515 }