+++ /dev/null
-; ****************************************************************************
-;
-; isolinux.asm
-;
-; A program to boot Linux kernels off a CD-ROM using the El Torito
-; boot standard in "no emulation" mode, making the entire filesystem
-; available. It is based on the SYSLINUX boot loader for MS-DOS
-; floppies.
-;
-; Copyright (C) 1994-2001 H. Peter Anvin
-;
-; This program is free software; you can redistribute it and/or modify
-; it under the terms of the GNU General Public License as published by
-; the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139,
-; USA; either version 2 of the License, or (at your option) any later
-; version; incorporated herein by reference.
-;
-; ****************************************************************************
-;
-; THIS FILE IS A MODIFIED VERSION OF ISOLINUX.ASM
-; MODIFICATION DONE BY MICHAEL K TER LOUW
-; LAST UPDATED 3-9-2002
-; SEE "COPYING" FOR INFORMATION ABOUT THE LICENSE THAT APPLIES TO THIS RELEASE
-;
-; ****************************************************************************
-;
-; This file is a modified version of ISOLINUX.ASM.
-; Modification done by Eric Kohl
-; Last update 04-25-2002
-;
-; ****************************************************************************
-
-; Note: The Makefile builds one version with DEBUG_MESSAGES automatically.
-;%define DEBUG_MESSAGES ; Uncomment to get debugging messages
-
-%define WAIT_FOR_KEY
-
-
-; ---------------------------------------------------------------------------
-; BEGIN THE BIOS/CODE/DATA SEGMENT
-; ---------------------------------------------------------------------------
-
- absolute 0400h
-serial_base resw 4 ; Base addresses for 4 serial ports
- absolute 0413h
-BIOS_fbm resw 1 ; Free Base Memory (kilobytes)
- absolute 046Ch
-BIOS_timer resw 1 ; Timer ticks
- absolute 0472h
-BIOS_magic resw 1 ; BIOS reset magic
- absolute 0484h
-BIOS_vidrows resb 1 ; Number of screen rows
-
-;
-; Memory below this point is reserved for the BIOS and the MBR
-;
- absolute 1000h
-trackbuf resb 8192 ; Track buffer goes here
-trackbufsize equ $-trackbuf
-; trackbuf ends at 3000h
-
- struc open_file_t
-file_sector resd 1 ; Sector pointer (0 = structure free)
-file_left resd 1 ; Number of sectors left
- endstruc
-
- struc dir_t
-dir_lba resd 1 ; Directory start (LBA)
-dir_len resd 1 ; Length in bytes
-dir_clust resd 1 ; Length in clusters
- endstruc
-
-
-MAX_OPEN_LG2 equ 2 ; log2(Max number of open files)
-MAX_OPEN equ (1 << MAX_OPEN_LG2)
-SECTORSIZE_LG2 equ 11 ; 2048 bytes/sector (El Torito requirement)
-SECTORSIZE equ (1 << SECTORSIZE_LG2)
-CR equ 13 ; Carriage Return
-LF equ 10 ; Line Feed
-retry_count equ 6 ; How patient are we with the BIOS?
-
-
-
- absolute 5000h ; Here we keep our BSS stuff
-
-DriveNo resb 1 ; CD-ROM BIOS drive number
-DiskError resb 1 ; Error code for disk I/O
-RetryCount resb 1 ; Used for disk access retries
-TimeoutCount resb 1 ; Timeout counter
-ISOFlags resb 1 ; Flags for ISO directory search
-RootDir resb dir_t_size ; Root directory
-CurDir resb dir_t_size ; Current directory
-ISOFileName resb 64 ; ISO filename canonicalization buffer
-ISOFileNameEnd equ $
-
-
- alignb open_file_t_size
-Files resb MAX_OPEN*open_file_t_size
-
-
-
- section .text
- org 7000h
-
-start:
- cli ; Disable interrupts
- xor ax, ax ; ax = segment zero
- mov ss, ax ; Initialize stack segment
- mov sp, start ; Set up stack
- mov ds, ax ; Initialize other segment registers
- mov es, ax
- mov fs, ax
- mov gs, ax
- sti ; Enable interrupts
- cld ; Increment pointers
-
- mov cx, 2048 >> 2 ; Copy the bootsector
- mov si, 0x7C00 ; from 0000:7C00
- mov di, 0x7000 ; to 0000:7000
- rep movsd ; copy the program
- jmp 0:relocate ; jump into relocated code
-
-relocate:
- ; Display the banner and copyright
-%ifdef DEBUG_MESSAGES
- mov si, isolinux_banner ; si points to hello message
- call writestr ; display the message
- mov si,copyright_str
- call writestr
-%endif
-
-
- ; Make sure the keyboard buffer is empty
-%ifdef WAIT_FOR_KEY
- call pollchar_and_empty
-
- ; Check for MBR on harddisk
- pusha
- mov ax, 0201h
- mov dx, 0080h
- mov cx, 0001h
- mov bx, trackbuf
- int 13h
- popa
- jc .boot_cdrom ; could not read hdd
-
- push ax
- mov ax, word [trackbuf]
- cmp ax, 0
- je .boot_cdrom ; no boot sector found (hopefully there are no weird bootsectors which begin with 0)
- pop ax
-
- ; Display the 'Press key' message and wait for a maximum of 5 seconds
- call crlf
- mov si, presskey_msg ; si points to 'Press key' message
- call writestr ; display the message
-
- mov byte [TimeoutCount], 5
-.next_second:
- mov eax, [BIOS_timer] ; load current tick counter
- add eax, 19 ;
-
-.poll_again:
- call pollchar_and_empty
- jnz .boot_cdrom
-
- mov ebx, [BIOS_timer]
- cmp eax, ebx
- jnz .poll_again
-
- mov si, dot_msg ; print '.'
- call writestr
- dec byte [TimeoutCount] ; decrement timeout counter
- jz .boot_harddisk
- jmp .next_second
-
-.boot_harddisk:
- call crlf
-
- ; Boot first harddisk (drive 0x80)
- mov ax, 0201h
- mov dx, 0080h
- mov cx, 0001h
- mov bx, 7C00h
- int 13h
- jnc .go_hd
- jmp kaboom
-.go_hd:
- mov ax, cs
- mov ds, ax
- mov es, ax
- mov fs, ax
- mov gs, ax
- mov dx, 0080h
-
- jmp 0:0x7C00
-%endif
-
-.boot_cdrom:
-%ifdef WAIT_FOR_KEY
- call crlf
- call crlf
-%endif
-
- ; Save and display the boot drive number
- mov [DriveNo], dl
-%ifdef DEBUG_MESSAGES
- mov si, startup_msg
- call writemsg
- mov al, dl
- call writehex2
- call crlf
-%endif
-
- ; Now figure out what we're actually doing
- ; Note: use passed-in DL value rather than 7Fh because
- ; at least some BIOSes will get the wrong value otherwise
- mov ax, 4B01h ; Get disk emulation status
- mov dl, [DriveNo]
- mov si, spec_packet
- int 13h
- jc near spec_query_failed ; Shouldn't happen (BIOS bug)
- mov dl, [DriveNo]
- cmp [sp_drive], dl ; Should contain the drive number
- jne near spec_query_failed
-
-%ifdef DEBUG_MESSAGES
- mov si, spec_ok_msg
- call writemsg
- mov al, byte [sp_drive]
- call writehex2
- call crlf
-%endif
-
-found_drive:
- ; Get drive information
- mov ah, 48h
- mov dl, [DriveNo]
- mov si, drive_params
- int 13h
- jnc params_ok
-
- ; mov si, nosecsize_msg No use in reporting this
- ; call writemsg
-
-params_ok:
- ; Check for the sector size (should be 2048, but
- ; some BIOSes apparently think we're 512-byte media)
- ;
- ; FIX: We need to check what the proper behaviour
- ; is for getlinsec when the BIOS thinks the sector
- ; size is 512!!! For that, we need such a BIOS, though...
-%ifdef DEBUG_MESSAGES
- mov si, secsize_msg
- call writemsg
- mov ax, [dp_secsize]
- call writehex4
- call crlf
-%endif
-
-
- ;
- ; Clear Files structures
- ;
- mov di, Files
- mov cx, (MAX_OPEN*open_file_t_size)/4
- xor eax, eax
- rep stosd
-
- ;
- ; Now, we need to sniff out the actual filesystem data structures.
- ; mkisofs gave us a pointer to the primary volume descriptor
- ; (which will be at 16 only for a single-session disk!); from the PVD
- ; we should be able to find the rest of what we need to know.
- ;
-get_fs_structures:
- mov eax, 16 ; Primary Volume Descriptor (sector 16)
- mov bx, trackbuf
- call getonesec
-
- mov eax, [trackbuf+156+2]
- mov [RootDir+dir_lba],eax
- mov [CurDir+dir_lba],eax
-%ifdef DEBUG_MESSAGES
- mov si, rootloc_msg
- call writemsg
- call writehex8
- call crlf
-%endif
-
- mov eax,[trackbuf+156+10]
- mov [RootDir+dir_len],eax
- mov [CurDir+dir_len],eax
-%ifdef DEBUG_MESSAGES
- mov si, rootlen_msg
- call writemsg
- call writehex8
- call crlf
-%endif
- add eax,SECTORSIZE-1
- shr eax,SECTORSIZE_LG2
- mov [RootDir+dir_clust],eax
- mov [CurDir+dir_clust],eax
-%ifdef DEBUG_MESSAGES
- mov si, rootsect_msg
- call writemsg
- call writehex8
- call crlf
-%endif
-
- ; Look for the "REACTOS" directory, and if found,
- ; make it the current directory instead of the root
- ; directory.
- mov di,isolinux_dir
- mov al,02h ; Search for a directory
- call searchdir_iso
- jnz .dir_found
- mov si,no_dir_msg
- call writemsg
- jmp kaboom
-
-.dir_found:
- mov [CurDir+dir_len],eax
- mov eax,[si+file_left]
- mov [CurDir+dir_clust],eax
- xor eax,eax ; Free this file pointer entry
- xchg eax,[si+file_sector]
- mov [CurDir+dir_lba],eax
-
-
- mov di, isolinux_bin ; di points to Isolinux filename
- call searchdir ; look for the file
- jnz .isolinux_opened ; got the file
- mov si, no_isolinux_msg ; si points to error message
- call writemsg ; display the message
- jmp kaboom ; fail boot
-
-.isolinux_opened:
- mov di, si ; save file pointer
-
-%ifdef DEBUG_MESSAGES
- mov si, filelen_msg
- call writemsg
- call writehex8
- call crlf
-%endif
-
- mov ecx, eax ; calculate sector count
- shr ecx, 11
- test eax, 0x7FF
- jz .full_sector
- inc ecx
-.full_sector:
-
-%ifdef DEBUG_MESSAGES
- mov eax, ecx
- mov si, filesect_msg
- call writemsg
- call writehex8
- call crlf
-%endif
-
-; use high segment, as some bios can fail, when offset is too big
- mov bx, 0x0F80 ; FREELDR_BASE / 16 ; es = load segment
- mov es, bx
- xor ebx, ebx ; bx = load offset
- mov si, di ; restore file pointer
- mov cx, 0xFFFF ; load the whole file
- call getfssec ; get the whole file
-
-%ifdef DEBUG_MESSAGES
- mov si, startldr_msg
- call writemsg
- call crlf
-%endif
-
- mov dl, [DriveNo] ; dl = boot drive
- mov dh, 0 ; dh = boot partition
-
- ; Transfer execution to the bootloader
- ;ljmp16 0, FREELDR_BASE
- db 0xEA
- dw 0xF800
- dw 0
-
-;
-; searchdir:
-;
-; Open a file
-;
-; On entry:
-; DS:DI = filename
-; If successful:
-; ZF clear
-; SI = file pointer
-; DX:AX or EAX = file length in bytes
-; If unsuccessful
-; ZF set
-;
-
-;
-; searchdir_iso is a special entry point for ISOLINUX only. In addition
-; to the above, searchdir_iso passes a file flag mask in AL. This is useful
-; for searching for directories.
-;
-alloc_failure:
- xor ax,ax ; ZF <- 1
- ret
-
-searchdir:
- xor al,al
-searchdir_iso:
- mov [ISOFlags],al
- call allocate_file ; Temporary file structure for directory
- jnz alloc_failure
- push es
- push ds
- pop es ; ES = DS
- mov si,CurDir
- cmp byte [di],'\' ; If filename begins with slash
- jne .not_rooted
- inc di ; Skip leading slash
- mov si,RootDir ; Reference root directory instead
-.not_rooted:
- mov eax,[si+dir_clust]
- mov [bx+file_left],eax
- mov eax,[si+dir_lba]
- mov [bx+file_sector],eax
- mov edx,[si+dir_len]
-
-.look_for_slash:
- mov ax,di
-.scan:
- mov cl,[di]
- inc di
- and cl,cl
- jz .isfile
- cmp cl,'\'
- jne .scan
- mov [di-1],byte 0 ; Terminate at directory name
- mov cl,02h ; Search for directory
- xchg cl,[ISOFlags]
- push di
- push cx
- push word .resume ; Where to "return" to
- push es
-.isfile:
- xchg ax,di
-
-.getsome:
- ; Get a chunk of the directory
- mov si,trackbuf
- pushad
- xchg bx,si
- mov cx,1 ; load one sector
- call getfssec
- popad
-
-.compare:
- movzx eax, byte [si] ; Length of directory entry
- cmp al, 33
- jb .next_sector
- mov cl, [si+25]
- xor cl, [ISOFlags]
- test cl, byte 8Eh ; Unwanted file attributes!
- jnz .not_file
- pusha
- movzx cx, byte [si+32] ; File identifier length
- add si, byte 33 ; File identifier offset
- call iso_compare_names
- popa
- je .success
-.not_file:
- sub edx, eax ; Decrease bytes left
- jbe .failure
- add si, ax ; Advance pointer
-
-.check_overrun:
- ; Did we finish the buffer?
- cmp si, trackbuf+trackbufsize
- jb .compare ; No, keep going
-
- jmp short .getsome ; Get some more directory
-
-.next_sector:
- ; Advance to the beginning of next sector
- lea ax, [si+SECTORSIZE-1]
- and ax, ~(SECTORSIZE-1)
- sub ax, si
- jmp short .not_file ; We still need to do length checks
-
-.failure:
-%ifdef DEBUG_MESSAGES
- mov si, findfail_msg
- call writemsg
- call crlf
-%endif
- xor eax, eax ; ZF = 1
- mov [bx+file_sector], eax
- pop es
- ret
-
-.success:
- mov eax, [si+2] ; Location of extent
- mov [bx+file_sector], eax
- mov eax, [si+10] ; Data length
- push eax
- add eax, SECTORSIZE-1
- shr eax, SECTORSIZE_LG2
- mov [bx+file_left], eax
- pop eax
- mov edx, eax
- shr edx, 16
- and bx, bx ; ZF = 0
- mov si, bx
- pop es
- ret
-
-.resume:
- ; We get here if we were only doing part of a lookup
- ; This relies on the fact that .success returns bx == si
- xchg edx, eax ; Directory length in edx
- pop cx ; Old ISOFlags
- pop di ; Next filename pointer
-
- mov byte [di-1], '\' ; restore the backslash in the filename
-
- mov [ISOFlags], cl ; Restore the flags
- jz .failure ; Did we fail? If so fail for real!
- jmp .look_for_slash ; Otherwise, next level
-
-;
-; allocate_file: Allocate a file structure
-;
-; If successful:
-; ZF set
-; BX = file pointer
-; In unsuccessful:
-; ZF clear
-;
-allocate_file:
- push cx
- mov bx, Files
- mov cx, MAX_OPEN
-.check:
- cmp dword [bx], byte 0
- je .found
- add bx, open_file_t_size ; ZF = 0
- loop .check
- ; ZF = 0 if we fell out of the loop
-.found:
- pop cx
- ret
-
-;
-; iso_compare_names:
-; Compare the names DS:SI and DS:DI and report if they are
-; equal from an ISO 9660 perspective. SI is the name from
-; the filesystem; CX indicates its length, and ';' terminates.
-; DI is expected to end with a null.
-;
-; Note: clobbers AX, CX, SI, DI; assumes DS == ES == base segment
-;
-iso_compare_names:
- ; First, terminate and canonicalize input filename
- push di
- mov di, ISOFileName
-.canon_loop:
- jcxz .canon_end
- lodsb
- dec cx
- cmp al, ';'
- je .canon_end
- and al, al
- je .canon_end
- stosb
- cmp di, ISOFileNameEnd-1 ; Guard against buffer overrun
- jb .canon_loop
-.canon_end:
- cmp di, ISOFileName
- jbe .canon_done
- cmp byte [di-1], '.' ; Remove terminal dots
- jne .canon_done
- dec di
- jmp short .canon_end
-.canon_done:
- mov [di], byte 0 ; Null-terminate string
- pop di
- mov si, ISOFileName
-.compare:
- lodsb
- mov ah, [di]
- inc di
- and ax, ax
- jz .success ; End of string for both
- and al, al ; Is either one end of string?
- jz .failure ; If so, failure
- and ah, ah
- jz .failure
- or ax, 2020h ; Convert to lower case
- cmp al, ah
- je .compare
-.failure:
- and ax, ax ; ZF = 0 (at least one will be nonzero)
-.success:
- ret
-
-
-
-
-
-
-
-;
-; getfssec: Get multiple clusters from a file, given the file pointer.
-;
-; On entry:
-; ES:BX -> Buffer
-; SI -> File pointer
-; CX -> Cluster count; 0FFFFh = until end of file
-; On exit:
-; SI -> File pointer (or 0 on EOF)
-; CF = 1 -> Hit EOF
-;
-getfssec:
- cmp cx, [si+file_left]
- jna .ok_size
- mov cx, [si+file_left]
-
-.ok_size:
- mov bp, cx
- push cx
- push si
- mov eax, [si+file_sector]
- call getlinsec
- xor ecx, ecx
- pop si
- pop cx
-
- add [si+file_sector], ecx
- sub [si+file_left], ecx
- ja .not_eof ; CF = 0
-
- xor ecx, ecx
- mov [si+file_sector], ecx ; Mark as unused
- xor si,si
- stc
-
-.not_eof:
- ret
-
-
-
-; INT 13h, AX=4B01h, DL=<passed in value> failed.
-; Try to scan the entire 80h-FFh from the end.
-spec_query_failed:
- mov si,spec_err_msg
- call writemsg
-
- mov dl, 0FFh
-.test_loop:
- pusha
- mov ax, 4B01h
- mov si, spec_packet
- mov byte [si], 13 ; Size of buffer
- int 13h
- popa
- jc .still_broken
-
- mov si, maybe_msg
- call writemsg
- mov al, dl
- call writehex2
- call crlf
-
- cmp byte [sp_drive], dl
- jne .maybe_broken
-
- ; Okay, good enough...
- mov si, alright_msg
- call writemsg
- mov [DriveNo], dl
-.found_drive:
- jmp found_drive
-
- ; Award BIOS 4.51 apparently passes garbage in sp_drive,
- ; but if this was the drive number originally passed in
- ; DL then consider it "good enough"
-.maybe_broken:
- cmp byte [DriveNo], dl
- je .found_drive
-
-.still_broken:
- dec dx
- cmp dl, 80h
- jnb .test_loop
-
-fatal_error:
- mov si, nothing_msg
- call writemsg
-
-.norge:
- jmp short .norge
-
-
-
- ; Information message (DS:SI) output
- ; Prefix with "isolinux: "
- ;
-writemsg:
- push ax
- push si
- mov si, isolinux_str
- call writestr
- pop si
- call writestr
- pop ax
- ret
-
-;
-; crlf: Print a newline
-;
-crlf:
- mov si, crlf_msg
- ; Fall through
-
-;
-; writestr: write a null-terminated string to the console, saving
-; registers on entry.
-;
-writestr:
- pushfd
- pushad
-.top:
- lodsb
- and al, al
- jz .end
- call writechr
- jmp short .top
-.end:
- popad
- popfd
- ret
-
-
-;
-; writehex[248]: Write a hex number in (AL, AX, EAX) to the console
-;
-writehex2:
- pushfd
- pushad
- shl eax, 24
- mov cx, 2
- jmp short writehex_common
-writehex4:
- pushfd
- pushad
- shl eax, 16
- mov cx, 4
- jmp short writehex_common
-writehex8:
- pushfd
- pushad
- mov cx, 8
-writehex_common:
-.loop:
- rol eax, 4
- push eax
- and al, 0Fh
- cmp al, 10
- jae .high
-.low:
- add al, '0'
- jmp short .ischar
-.high:
- add al, 'A'-10
-.ischar:
- call writechr
- pop eax
- loop .loop
- popad
- popfd
- ret
-
-;
-; Write a character to the screen. There is a more "sophisticated"
-; version of this in the subsequent code, so we patch the pointer
-; when appropriate.
-;
-
-writechr:
- pushfd
- pushad
- mov ah, 0Eh
- xor bx, bx
- int 10h
- popad
- popfd
- ret
-
-;
-; Get one sector. Convenience entry point.
-;
-getonesec:
- mov bp, 1
- ; Fall through to getlinsec
-
-;
-; Get linear sectors - EBIOS LBA addressing, 2048-byte sectors.
-;
-; Note that we can't always do this as a single request, because at least
-; Phoenix BIOSes has a 127-sector limit. To be on the safe side, stick
-; to 32 sectors (64K) per request.
-;
-; Input:
-; EAX - Linear sector number
-; ES:BX - Target buffer
-; BP - Sector count
-;
-getlinsec:
- mov si,dapa ; Load up the DAPA
- mov [si+4],bx
- mov bx,es
- mov [si+6],bx
- mov [si+8],eax
-.loop2:
- push bp ; Sectors left
- cmp bp,[MaxTransfer]
- jbe .bp_ok
- mov bp,[MaxTransfer]
-.bp_ok:
- mov [si+2],bp
- push si
- mov dl,[DriveNo]
- mov ah,42h ; Extended Read
- call xint13
- pop si
- pop bp
- movzx eax,word [si+2] ; Sectors we read
- add [si+8],eax ; Advance sector pointer
- sub bp,ax ; Sectors left
- shl ax,SECTORSIZE_LG2-4 ; 2048-byte sectors -> segment
- add [si+6],ax ; Advance buffer pointer
- and bp,bp
- jnz .loop2
- mov eax,[si+8] ; Next sector
- ret
-
- ; INT 13h with retry
-xint13:
- mov byte [RetryCount], retry_count
-.try:
- pushad
- int 13h
- jc .error
- add sp, byte 8*4 ; Clean up stack
- ret
-.error:
- mov [DiskError], ah ; Save error code
- popad
- dec byte [RetryCount]
- jz .real_error
- push ax
- mov al,[RetryCount]
- mov ah,[dapa+2] ; Sector transfer count
- cmp al,2 ; Only 2 attempts left
- ja .nodanger
- mov ah,1 ; Drop transfer size to 1
- jmp short .setsize
-.nodanger:
- cmp al,retry_count-2
- ja .again ; First time, just try again
- shr ah,1 ; Otherwise, try to reduce
- adc ah,0 ; the max transfer size, but not to 0
-.setsize:
- mov [MaxTransfer],ah
- mov [dapa+2],ah
-.again:
- pop ax
- jmp .try
-
-.real_error:
- mov si, diskerr_msg
- call writemsg
- mov al, [DiskError]
- call writehex2
- mov si, ondrive_str
- call writestr
- mov al, dl
- call writehex2
- call crlf
- ; Fall through to kaboom
-
-;
-; kaboom: write a message and bail out. Wait for a user keypress,
-; then do a hard reboot.
-;
-kaboom:
- mov ax, cs
- mov ds, ax
- mov es, ax
- mov fs, ax
- mov gs, ax
- sti
- mov si, err_bootfailed
- call writestr
- xor ax, ax ; Wait for keypress
- int 16h
- cli
- mov word [BIOS_magic], 0 ; Cold reboot
- jmp 0F000h:0FFF0h ; Reset vector address
-
-
-;
-; pollchar_and_empty: check if we have an input character pending (ZF = 0) and empty the input buffer afterwards
-;
-pollchar_and_empty:
- pushad
- mov ah, 1 ; Did the user press a key?
- int 16h
- jz .end ; No, then we're done
- mov ah, 0 ; Otherwise empty the buffer by reading it
- int 16h
-.end:
- popad
- ret
-
-
-
-isolinux_banner db CR, LF, 'Loading IsoBoot...', CR, LF, 0
-copyright_str db ' (C) 1994-2002 H. Peter Anvin', CR, LF, 0
-presskey_msg db 'Press any key to boot from CD', 0
-dot_msg db '.',0
-
-%ifdef DEBUG_MESSAGES
-startup_msg: db 'Startup, DL = ', 0
-spec_ok_msg: db 'packet OK, drive = ', 0
-secsize_msg: db 'size appears to be ', 0
-rootloc_msg: db 'Root dir loc: ', 0
-rootlen_msg: db 'Root dir len: ', 0
-rootsect_msg: db 'Root dir len(sect): ', 0
-fileloc_msg: db 'SETUPLDR loc: ', 0
-filelen_msg: db 'SETUPLDR len: ', 0
-filesect_msg: db 'SETUPLDR len(sect): ', 0
-findfail_msg: db 'Failed to find file!', 0
-startldr_msg: db 'Starting SETUPLDR.SYS', 0
-%endif
-
-; nosecsize_msg: db 'No sector size, assume 0800', CR, LF, 0
-spec_err_msg: db 'Load spec failed, trying wing ...', CR, LF, 0
-maybe_msg: db 'Found smth at drive = ', 0
-alright_msg: db 'might be ok, continuing...', CR, LF, 0
-nothing_msg: db 'Failed locate CD-ROM; boot failed.', CR, LF, 0
-isolinux_str db 'IsoBoot: ', 0
-crlf_msg db CR, LF, 0
-diskerr_msg: db 'Disk error ', 0
-ondrive_str: db ', drive ', 0
-err_bootfailed db CR, LF, 'failed..', 0
-isolinux_dir db '\LOADER', 0
-no_dir_msg db 'LOADER dir not found.', CR, LF, 0
-isolinux_bin db 'SETUPLDR.SYS', 0
-no_isolinux_msg db 'SETUPLDR not found.', CR, LF, 0
-
-;
-; El Torito spec packet
-;
- align 8, db 0
-spec_packet: db 13h ; Size of packet
-sp_media: db 0 ; Media type
-sp_drive: db 0 ; Drive number
-sp_controller: db 0 ; Controller index
-sp_lba: dd 0 ; LBA for emulated disk image
-sp_devspec: dw 0 ; IDE/SCSI information
-sp_buffer: dw 0 ; User-provided buffer
-sp_loadseg: dw 0 ; Load segment
-sp_sectors: dw 0 ; Sector count
-sp_chs: db 0,0,0 ; Simulated CHS geometry
-sp_dummy: db 0 ; Scratch, safe to overwrite
-
-;
-; EBIOS drive parameter packet
-;
- align 8, db 0
-drive_params: dw 30 ; Buffer size
-dp_flags: dw 0 ; Information flags
-dp_cyl: dd 0 ; Physical cylinders
-dp_head: dd 0 ; Physical heads
-dp_sec: dd 0 ; Physical sectors/track
-dp_totalsec: dd 0,0 ; Total sectors
-dp_secsize: dw 0 ; Bytes per sector
-dp_dpte: dd 0 ; Device Parameter Table
-dp_dpi_key: dw 0 ; 0BEDDh if rest valid
-dp_dpi_len: db 0 ; DPI len
- db 0
- dw 0
-dp_bus: times 4 db 0 ; Host bus type
-dp_interface: times 8 db 0 ; Interface type
-db_i_path: dd 0,0 ; Interface path
-db_d_path: dd 0,0 ; Device path
- db 0
-db_dpi_csum: db 0 ; Checksum for DPI info
-
-;
-; EBIOS disk address packet
-;
- align 8, db 0
-dapa: dw 16 ; Packet size
-.count: dw 0 ; Block count
-.off: dw 0 ; Offset of buffer
-.seg: dw 0 ; Segment of buffer
-.lba: dd 0 ; LBA (LSW)
- dd 0 ; LBA (MSW)
-
- alignb 4, db 0
-MaxTransfer dw 2 ;32 ; Max sectors per transfer
-
- times 2046-($-$$) db 0 ; Pad to file offset 2046
- dw 0aa55h ; BootSector signature
projects / reactos.git / blobdiff