+++ /dev/null
-/******************************************************************************
- *
- * Module Name: utbuffer - Buffer dump routines
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2017, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- * substantially similar to the "NO WARRANTY" disclaimer below
- * ("Disclaimer") and any redistribution must be conditioned upon
- * including a substantially similar Disclaimer requirement for further
- * binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- * of any contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include "acpi.h"
-#include "accommon.h"
-
-#define _COMPONENT ACPI_UTILITIES
- ACPI_MODULE_NAME ("utbuffer")
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtDumpBuffer
- *
- * PARAMETERS: Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display:
- * DB_BYTE_DISPLAY
- * DB_WORD_DISPLAY
- * DB_DWORD_DISPLAY
- * DB_QWORD_DISPLAY
- * BaseOffset - Beginning buffer offset (display only)
- *
- * RETURN: None
- *
- * DESCRIPTION: Generic dump buffer in both hex and ascii.
- *
- ******************************************************************************/
-
-void
-AcpiUtDumpBuffer (
- UINT8 *Buffer,
- UINT32 Count,
- UINT32 Display,
- UINT32 BaseOffset)
-{
- UINT32 i = 0;
- UINT32 j;
- UINT32 Temp32;
- UINT8 BufChar;
-
-
- if (!Buffer)
- {
- AcpiOsPrintf ("Null Buffer Pointer in DumpBuffer!\n");
- return;
- }
-
- if ((Count < 4) || (Count & 0x01))
- {
- Display = DB_BYTE_DISPLAY;
- }
-
- /* Nasty little dump buffer routine! */
-
- while (i < Count)
- {
- /* Print current offset */
-
- AcpiOsPrintf ("%6.4X: ", (BaseOffset + i));
-
- /* Print 16 hex chars */
-
- for (j = 0; j < 16;)
- {
- if (i + j >= Count)
- {
- /* Dump fill spaces */
-
- AcpiOsPrintf ("%*s", ((Display * 2) + 1), " ");
- j += Display;
- continue;
- }
-
- switch (Display)
- {
- case DB_BYTE_DISPLAY:
- default: /* Default is BYTE display */
-
- AcpiOsPrintf ("%02X ", Buffer[(ACPI_SIZE) i + j]);
- break;
-
- case DB_WORD_DISPLAY:
-
- ACPI_MOVE_16_TO_32 (&Temp32, &Buffer[(ACPI_SIZE) i + j]);
- AcpiOsPrintf ("%04X ", Temp32);
- break;
-
- case DB_DWORD_DISPLAY:
-
- ACPI_MOVE_32_TO_32 (&Temp32, &Buffer[(ACPI_SIZE) i + j]);
- AcpiOsPrintf ("%08X ", Temp32);
- break;
-
- case DB_QWORD_DISPLAY:
-
- ACPI_MOVE_32_TO_32 (&Temp32, &Buffer[(ACPI_SIZE) i + j]);
- AcpiOsPrintf ("%08X", Temp32);
-
- ACPI_MOVE_32_TO_32 (&Temp32, &Buffer[(ACPI_SIZE) i + j + 4]);
- AcpiOsPrintf ("%08X ", Temp32);
- break;
- }
-
- j += Display;
- }
-
- /*
- * Print the ASCII equivalent characters but watch out for the bad
- * unprintable ones (printable chars are 0x20 through 0x7E)
- */
- AcpiOsPrintf (" ");
- for (j = 0; j < 16; j++)
- {
- if (i + j >= Count)
- {
- AcpiOsPrintf ("\n");
- return;
- }
-
- /*
- * Add comment characters so rest of line is ignored when
- * compiled
- */
- if (j == 0)
- {
- AcpiOsPrintf ("// ");
- }
-
- BufChar = Buffer[(ACPI_SIZE) i + j];
- if (isprint (BufChar))
- {
- AcpiOsPrintf ("%c", BufChar);
- }
- else
- {
- AcpiOsPrintf (".");
- }
- }
-
- /* Done with that line. */
-
- AcpiOsPrintf ("\n");
- i += 16;
- }
-
- return;
-}
-
-
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtDebugDumpBuffer
- *
- * PARAMETERS: Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display:
- * DB_BYTE_DISPLAY
- * DB_WORD_DISPLAY
- * DB_DWORD_DISPLAY
- * DB_QWORD_DISPLAY
- * ComponentID - Caller's component ID
- *
- * RETURN: None
- *
- * DESCRIPTION: Generic dump buffer in both hex and ascii.
- *
- ******************************************************************************/
-
-void
-AcpiUtDebugDumpBuffer (
- UINT8 *Buffer,
- UINT32 Count,
- UINT32 Display,
- UINT32 ComponentId)
-{
-
- /* Only dump the buffer if tracing is enabled */
-
- if (!((ACPI_LV_TABLES & AcpiDbgLevel) &&
- (ComponentId & AcpiDbgLayer)))
- {
- return;
- }
-
- AcpiUtDumpBuffer (Buffer, Count, Display, 0);
-}
-
-
-#ifdef ACPI_APPLICATION
-/*******************************************************************************
- *
- * FUNCTION: AcpiUtDumpBufferToFile
- *
- * PARAMETERS: File - File descriptor
- * Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display:
- * DB_BYTE_DISPLAY
- * DB_WORD_DISPLAY
- * DB_DWORD_DISPLAY
- * DB_QWORD_DISPLAY
- * BaseOffset - Beginning buffer offset (display only)
- *
- * RETURN: None
- *
- * DESCRIPTION: Generic dump buffer in both hex and ascii to a file.
- *
- ******************************************************************************/
-
-void
-AcpiUtDumpBufferToFile (
- ACPI_FILE File,
- UINT8 *Buffer,
- UINT32 Count,
- UINT32 Display,
- UINT32 BaseOffset)
-{
- UINT32 i = 0;
- UINT32 j;
- UINT32 Temp32;
- UINT8 BufChar;
-
-
- if (!Buffer)
- {
- fprintf (File, "Null Buffer Pointer in DumpBuffer!\n");
- return;
- }
-
- if ((Count < 4) || (Count & 0x01))
- {
- Display = DB_BYTE_DISPLAY;
- }
-
- /* Nasty little dump buffer routine! */
-
- while (i < Count)
- {
- /* Print current offset */
-
- fprintf (File, "%6.4X: ", (BaseOffset + i));
-
- /* Print 16 hex chars */
-
- for (j = 0; j < 16;)
- {
- if (i + j >= Count)
- {
- /* Dump fill spaces */
-
- fprintf (File, "%*s", ((Display * 2) + 1), " ");
- j += Display;
- continue;
- }
-
- switch (Display)
- {
- case DB_BYTE_DISPLAY:
- default: /* Default is BYTE display */
-
- fprintf (File, "%02X ", Buffer[(ACPI_SIZE) i + j]);
- break;
-
- case DB_WORD_DISPLAY:
-
- ACPI_MOVE_16_TO_32 (&Temp32, &Buffer[(ACPI_SIZE) i + j]);
- fprintf (File, "%04X ", Temp32);
- break;
-
- case DB_DWORD_DISPLAY:
-
- ACPI_MOVE_32_TO_32 (&Temp32, &Buffer[(ACPI_SIZE) i + j]);
- fprintf (File, "%08X ", Temp32);
- break;
-
- case DB_QWORD_DISPLAY:
-
- ACPI_MOVE_32_TO_32 (&Temp32, &Buffer[(ACPI_SIZE) i + j]);
- fprintf (File, "%08X", Temp32);
-
- ACPI_MOVE_32_TO_32 (&Temp32, &Buffer[(ACPI_SIZE) i + j + 4]);
- fprintf (File, "%08X ", Temp32);
- break;
- }
-
- j += Display;
- }
-
- /*
- * Print the ASCII equivalent characters but watch out for the bad
- * unprintable ones (printable chars are 0x20 through 0x7E)
- */
- fprintf (File, " ");
- for (j = 0; j < 16; j++)
- {
- if (i + j >= Count)
- {
- fprintf (File, "\n");
- return;
- }
-
- BufChar = Buffer[(ACPI_SIZE) i + j];
- if (isprint (BufChar))
- {
- fprintf (File, "%c", BufChar);
- }
- else
- {
- fprintf (File, ".");
- }
- }
-
- /* Done with that line. */
-
- fprintf (File, "\n");
- i += 16;
- }
-
- return;
-}
-#endif
projects / reactos.git / blobdiff