[SDK] One step further towards ReactOS source code tree restructure: the sdk folder...
[reactos.git] / reactos / include / reactos / libs / libjpeg / jpegint.h
diff --git a/reactos/include/reactos/libs/libjpeg/jpegint.h b/reactos/include/reactos/libs/libjpeg/jpegint.h
deleted file mode 100644 (file)
index 18bb887..0000000
+++ /dev/null
@@ -1,426 +0,0 @@
-/*
- * jpegint.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 1997-2013 by Guido Vollbeding.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides common declarations for the various JPEG modules.
- * These declarations are considered internal to the JPEG library; most
- * applications using the library shouldn't need to include this file.
- */
-
-
-/* Declarations for both compression & decompression */
-
-typedef enum {                 /* Operating modes for buffer controllers */
-       JBUF_PASS_THRU,         /* Plain stripwise operation */
-       /* Remaining modes require a full-image buffer to have been created */
-       JBUF_SAVE_SOURCE,       /* Run source subobject only, save output */
-       JBUF_CRANK_DEST,        /* Run dest subobject only, using saved data */
-       JBUF_SAVE_AND_PASS      /* Run both subobjects, save output */
-} J_BUF_MODE;
-
-/* Values of global_state field (jdapi.c has some dependencies on ordering!) */
-#define CSTATE_START   100     /* after create_compress */
-#define CSTATE_SCANNING        101     /* start_compress done, write_scanlines OK */
-#define CSTATE_RAW_OK  102     /* start_compress done, write_raw_data OK */
-#define CSTATE_WRCOEFS 103     /* jpeg_write_coefficients done */
-#define DSTATE_START   200     /* after create_decompress */
-#define DSTATE_INHEADER        201     /* reading header markers, no SOS yet */
-#define DSTATE_READY   202     /* found SOS, ready for start_decompress */
-#define DSTATE_PRELOAD 203     /* reading multiscan file in start_decompress*/
-#define DSTATE_PRESCAN 204     /* performing dummy pass for 2-pass quant */
-#define DSTATE_SCANNING        205     /* start_decompress done, read_scanlines OK */
-#define DSTATE_RAW_OK  206     /* start_decompress done, read_raw_data OK */
-#define DSTATE_BUFIMAGE        207     /* expecting jpeg_start_output */
-#define DSTATE_BUFPOST 208     /* looking for SOS/EOI in jpeg_finish_output */
-#define DSTATE_RDCOEFS 209     /* reading file in jpeg_read_coefficients */
-#define DSTATE_STOPPING        210     /* looking for EOI in jpeg_finish_decompress */
-
-
-/* Declarations for compression modules */
-
-/* Master control module */
-struct jpeg_comp_master {
-  JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo));
-  JMETHOD(void, pass_startup, (j_compress_ptr cinfo));
-  JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
-
-  /* State variables made visible to other modules */
-  boolean call_pass_startup;   /* True if pass_startup must be called */
-  boolean is_last_pass;                /* True during last pass */
-};
-
-/* Main buffer control (downsampled-data buffer) */
-struct jpeg_c_main_controller {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(void, process_data, (j_compress_ptr cinfo,
-                              JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
-                              JDIMENSION in_rows_avail));
-};
-
-/* Compression preprocessing (downsampling input buffer control) */
-struct jpeg_c_prep_controller {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(void, pre_process_data, (j_compress_ptr cinfo,
-                                  JSAMPARRAY input_buf,
-                                  JDIMENSION *in_row_ctr,
-                                  JDIMENSION in_rows_avail,
-                                  JSAMPIMAGE output_buf,
-                                  JDIMENSION *out_row_group_ctr,
-                                  JDIMENSION out_row_groups_avail));
-};
-
-/* Coefficient buffer control */
-struct jpeg_c_coef_controller {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(boolean, compress_data, (j_compress_ptr cinfo,
-                                  JSAMPIMAGE input_buf));
-};
-
-/* Colorspace conversion */
-struct jpeg_color_converter {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
-  JMETHOD(void, color_convert, (j_compress_ptr cinfo,
-                               JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-                               JDIMENSION output_row, int num_rows));
-};
-
-/* Downsampling */
-struct jpeg_downsampler {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
-  JMETHOD(void, downsample, (j_compress_ptr cinfo,
-                            JSAMPIMAGE input_buf, JDIMENSION in_row_index,
-                            JSAMPIMAGE output_buf,
-                            JDIMENSION out_row_group_index));
-
-  boolean need_context_rows;   /* TRUE if need rows above & below */
-};
-
-/* Forward DCT (also controls coefficient quantization) */
-typedef JMETHOD(void, forward_DCT_ptr,
-               (j_compress_ptr cinfo, jpeg_component_info * compptr,
-                JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
-                JDIMENSION start_row, JDIMENSION start_col,
-                JDIMENSION num_blocks));
-
-struct jpeg_forward_dct {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
-  /* It is useful to allow each component to have a separate FDCT method. */
-  forward_DCT_ptr forward_DCT[MAX_COMPONENTS];
-};
-
-/* Entropy encoding */
-struct jpeg_entropy_encoder {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics));
-  JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data));
-  JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
-};
-
-/* Marker writing */
-struct jpeg_marker_writer {
-  JMETHOD(void, write_file_header, (j_compress_ptr cinfo));
-  JMETHOD(void, write_frame_header, (j_compress_ptr cinfo));
-  JMETHOD(void, write_scan_header, (j_compress_ptr cinfo));
-  JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo));
-  JMETHOD(void, write_tables_only, (j_compress_ptr cinfo));
-  /* These routines are exported to allow insertion of extra markers */
-  /* Probably only COM and APPn markers should be written this way */
-  JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker,
-                                     unsigned int datalen));
-  JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val));
-};
-
-
-/* Declarations for decompression modules */
-
-/* Master control module */
-struct jpeg_decomp_master {
-  JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo));
-
-  /* State variables made visible to other modules */
-  boolean is_dummy_pass;       /* True during 1st pass for 2-pass quant */
-};
-
-/* Input control module */
-struct jpeg_input_controller {
-  JMETHOD(int, consume_input, (j_decompress_ptr cinfo));
-  JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo));
-  JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo));
-
-  /* State variables made visible to other modules */
-  boolean has_multiple_scans;  /* True if file has multiple scans */
-  boolean eoi_reached;         /* True when EOI has been consumed */
-};
-
-/* Main buffer control (downsampled-data buffer) */
-struct jpeg_d_main_controller {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(void, process_data, (j_decompress_ptr cinfo,
-                              JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
-                              JDIMENSION out_rows_avail));
-};
-
-/* Coefficient buffer control */
-struct jpeg_d_coef_controller {
-  JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
-  JMETHOD(int, consume_data, (j_decompress_ptr cinfo));
-  JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo));
-  JMETHOD(int, decompress_data, (j_decompress_ptr cinfo,
-                                JSAMPIMAGE output_buf));
-  /* Pointer to array of coefficient virtual arrays, or NULL if none */
-  jvirt_barray_ptr *coef_arrays;
-};
-
-/* Decompression postprocessing (color quantization buffer control) */
-struct jpeg_d_post_controller {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
-  JMETHOD(void, post_process_data, (j_decompress_ptr cinfo,
-                                   JSAMPIMAGE input_buf,
-                                   JDIMENSION *in_row_group_ctr,
-                                   JDIMENSION in_row_groups_avail,
-                                   JSAMPARRAY output_buf,
-                                   JDIMENSION *out_row_ctr,
-                                   JDIMENSION out_rows_avail));
-};
-
-/* Marker reading & parsing */
-struct jpeg_marker_reader {
-  JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo));
-  /* Read markers until SOS or EOI.
-   * Returns same codes as are defined for jpeg_consume_input:
-   * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
-   */
-  JMETHOD(int, read_markers, (j_decompress_ptr cinfo));
-  /* Read a restart marker --- exported for use by entropy decoder only */
-  jpeg_marker_parser_method read_restart_marker;
-
-  /* State of marker reader --- nominally internal, but applications
-   * supplying COM or APPn handlers might like to know the state.
-   */
-  boolean saw_SOI;             /* found SOI? */
-  boolean saw_SOF;             /* found SOF? */
-  int next_restart_num;                /* next restart number expected (0-7) */
-  unsigned int discarded_bytes;        /* # of bytes skipped looking for a marker */
-};
-
-/* Entropy decoding */
-struct jpeg_entropy_decoder {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, JBLOCKROW *MCU_data));
-  JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
-};
-
-/* Inverse DCT (also performs dequantization) */
-typedef JMETHOD(void, inverse_DCT_method_ptr,
-               (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-                JCOEFPTR coef_block,
-                JSAMPARRAY output_buf, JDIMENSION output_col));
-
-struct jpeg_inverse_dct {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  /* It is useful to allow each component to have a separate IDCT method. */
-  inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS];
-};
-
-/* Upsampling (note that upsampler must also call color converter) */
-struct jpeg_upsampler {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, upsample, (j_decompress_ptr cinfo,
-                          JSAMPIMAGE input_buf,
-                          JDIMENSION *in_row_group_ctr,
-                          JDIMENSION in_row_groups_avail,
-                          JSAMPARRAY output_buf,
-                          JDIMENSION *out_row_ctr,
-                          JDIMENSION out_rows_avail));
-
-  boolean need_context_rows;   /* TRUE if need rows above & below */
-};
-
-/* Colorspace conversion */
-struct jpeg_color_deconverter {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, color_convert, (j_decompress_ptr cinfo,
-                               JSAMPIMAGE input_buf, JDIMENSION input_row,
-                               JSAMPARRAY output_buf, int num_rows));
-};
-
-/* Color quantization or color precision reduction */
-struct jpeg_color_quantizer {
-  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan));
-  JMETHOD(void, color_quantize, (j_decompress_ptr cinfo,
-                                JSAMPARRAY input_buf, JSAMPARRAY output_buf,
-                                int num_rows));
-  JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
-  JMETHOD(void, new_color_map, (j_decompress_ptr cinfo));
-};
-
-
-/* Miscellaneous useful macros */
-
-#undef MAX
-#define MAX(a,b)       ((a) > (b) ? (a) : (b))
-#undef MIN
-#define MIN(a,b)       ((a) < (b) ? (a) : (b))
-
-
-/* We assume that right shift corresponds to signed division by 2 with
- * rounding towards minus infinity.  This is correct for typical "arithmetic
- * shift" instructions that shift in copies of the sign bit.  But some
- * C compilers implement >> with an unsigned shift.  For these machines you
- * must define RIGHT_SHIFT_IS_UNSIGNED.
- * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity.
- * It is only applied with constant shift counts.  SHIFT_TEMPS must be
- * included in the variables of any routine using RIGHT_SHIFT.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define SHIFT_TEMPS    INT32 shift_temp;
-#define RIGHT_SHIFT(x,shft)  \
-       ((shift_temp = (x)) < 0 ? \
-        (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \
-        (shift_temp >> (shft)))
-#else
-#define SHIFT_TEMPS
-#define RIGHT_SHIFT(x,shft)    ((x) >> (shft))
-#endif
-
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jinit_compress_master  jICompress
-#define jinit_c_master_control jICMaster
-#define jinit_c_main_controller        jICMainC
-#define jinit_c_prep_controller        jICPrepC
-#define jinit_c_coef_controller        jICCoefC
-#define jinit_color_converter  jICColor
-#define jinit_downsampler      jIDownsampler
-#define jinit_forward_dct      jIFDCT
-#define jinit_huff_encoder     jIHEncoder
-#define jinit_arith_encoder    jIAEncoder
-#define jinit_marker_writer    jIMWriter
-#define jinit_master_decompress        jIDMaster
-#define jinit_d_main_controller        jIDMainC
-#define jinit_d_coef_controller        jIDCoefC
-#define jinit_d_post_controller        jIDPostC
-#define jinit_input_controller jIInCtlr
-#define jinit_marker_reader    jIMReader
-#define jinit_huff_decoder     jIHDecoder
-#define jinit_arith_decoder    jIADecoder
-#define jinit_inverse_dct      jIIDCT
-#define jinit_upsampler                jIUpsampler
-#define jinit_color_deconverter        jIDColor
-#define jinit_1pass_quantizer  jI1Quant
-#define jinit_2pass_quantizer  jI2Quant
-#define jinit_merged_upsampler jIMUpsampler
-#define jinit_memory_mgr       jIMemMgr
-#define jdiv_round_up          jDivRound
-#define jround_up              jRound
-#define jzero_far              jZeroFar
-#define jcopy_sample_rows      jCopySamples
-#define jcopy_block_row                jCopyBlocks
-#define jpeg_zigzag_order      jZIGTable
-#define jpeg_natural_order     jZAGTable
-#define jpeg_natural_order7    jZAG7Table
-#define jpeg_natural_order6    jZAG6Table
-#define jpeg_natural_order5    jZAG5Table
-#define jpeg_natural_order4    jZAG4Table
-#define jpeg_natural_order3    jZAG3Table
-#define jpeg_natural_order2    jZAG2Table
-#define jpeg_aritab            jAriTab
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays
- * and coefficient-block arrays.  This won't work on 80x86 because the arrays
- * are FAR and we're assuming a small-pointer memory model.  However, some
- * DOS compilers provide far-pointer versions of memcpy() and memset() even
- * in the small-model libraries.  These will be used if USE_FMEM is defined.
- * Otherwise, the routines in jutils.c do it the hard way.
- */
-
-#ifndef NEED_FAR_POINTERS      /* normal case, same as regular macro */
-#define FMEMZERO(target,size)  MEMZERO(target,size)
-#else                          /* 80x86 case */
-#ifdef USE_FMEM
-#define FMEMZERO(target,size)  _fmemset((void FAR *)(target), 0, (size_t)(size))
-#else
-EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
-#define FMEMZERO(target,size)  jzero_far(target, size)
-#endif
-#endif
-
-
-/* Compression module initialization routines */
-EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo,
-                                        boolean transcode_only));
-EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo,
-                                         boolean need_full_buffer));
-EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo,
-                                         boolean need_full_buffer));
-EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo,
-                                         boolean need_full_buffer));
-EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo));
-/* Decompression module initialization routines */
-EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo,
-                                         boolean need_full_buffer));
-EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo,
-                                         boolean need_full_buffer));
-EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo,
-                                         boolean need_full_buffer));
-EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo));
-/* Memory manager initialization */
-EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo));
-
-/* Utility routines in jutils.c */
-EXTERN(long) jdiv_round_up JPP((long a, long b));
-EXTERN(long) jround_up JPP((long a, long b));
-EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row,
-                                   JSAMPARRAY output_array, int dest_row,
-                                   int num_rows, JDIMENSION num_cols));
-EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row,
-                                 JDIMENSION num_blocks));
-/* Constant tables in jutils.c */
-#if 0                          /* This table is not actually needed in v6a */
-extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
-#endif
-extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */
-extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */
-extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */
-extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */
-extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */
-extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */
-extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */
-
-/* Arithmetic coding probability estimation tables in jaricom.c */
-extern const INT32 jpeg_aritab[];
-
-/* Suppress undefined-structure complaints if necessary. */
-
-#ifdef INCOMPLETE_TYPES_BROKEN
-#ifndef AM_MEMORY_MANAGER      /* only jmemmgr.c defines these */
-struct jvirt_sarray_control { long dummy; };
-struct jvirt_barray_control { long dummy; };
-#endif
-#endif /* INCOMPLETE_TYPES_BROKEN */