+/*
+ * FILE: sha2.c
+ * AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/
+ *
+ * Copyright (c) 2000-2001, Aaron D. Gifford
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+
+#include <string.h>
+#include <assert.h>
+#include "sha2.h"
+
+/*
+ * ASSERT NOTE:
+ * Some sanity checking code is included using assert(). On my FreeBSD
+ * system, this additional code can be removed by compiling with NDEBUG
+ * defined. Check your own systems manpage on assert() to see how to
+ * compile WITHOUT the sanity checking code on your system.
+ *
+ * UNROLLED TRANSFORM LOOP NOTE:
+ * You can define SHA2_UNROLL_TRANSFORM to use the unrolled transform
+ * loop version for the hash transform rounds (defined using macros
+ * later in this file). Either define on the command line, for example:
+ *
+ * cc -DSHA2_UNROLL_TRANSFORM -o sha2 sha2.c sha2prog.c
+ *
+ * or define below:
+ *
+ * #define SHA2_UNROLL_TRANSFORM
+ *
+ */
+
+/*** SHA-256/384/512 Various Length Definitions ***********************/
+/* NOTE: Most of these are in sha2.h */
+#define SHA256_SHORT_BLOCK_LENGTH (SHA256_BLOCK_LENGTH - 8)
+#define SHA384_SHORT_BLOCK_LENGTH (SHA384_BLOCK_LENGTH - 16)
+#define SHA512_SHORT_BLOCK_LENGTH (SHA512_BLOCK_LENGTH - 16)
+
+#define SHA2_WORD64_CONST(dw1, dw2) (((sha2_word64)(dw1) << 32) | (dw2))
+
+/*** ENDIAN REVERSAL MACROS *******************************************/
+#ifndef WORDS_BIGENDIAN
+#define REVERSE32(w,x) { \
+ sha2_word32 tmp = (w); \
+ tmp = (tmp >> 16) | (tmp << 16); \
+ (x) = ((tmp & 0xff00ff00) >> 8) | ((tmp & 0x00ff00ff) << 8); \
+}
+#define REVERSE64(w,x) { \
+ sha2_word64 tmp = (w); \
+ tmp = (tmp >> 32) | (tmp << 32); \
+ tmp = ((tmp & SHA2_WORD64_CONST(0xff00ff00, 0xff00ff00)) >> 8) | \
+ ((tmp & SHA2_WORD64_CONST(0x00ff00ff, 0x00ff00ff)) << 8); \
+ (x) = ((tmp & SHA2_WORD64_CONST(0xffff0000, 0xffff0000)) >> 16) | \
+ ((tmp & SHA2_WORD64_CONST(0x0000ffff, 0x0000ffff)) << 16); \
+}
+#endif
+
+/*
+ * Macro for incrementally adding the unsigned 64-bit integer n to the
+ * unsigned 128-bit integer (represented using a two-element array of
+ * 64-bit words):
+ */
+#define ADDINC128(w,n) { \
+ (w)[0] += (sha2_word64)(n); \
+ if ((w)[0] < (n)) { \
+ (w)[1]++; \
+ } \
+}
+
+/*
+ * Macros for copying blocks of memory and for zeroing out ranges
+ * of memory. Using these macros makes it easy to switch from
+ * using memset()/memcpy() and using bzero()/bcopy().
+ *
+ * Please define either SHA2_USE_MEMSET_MEMCPY or define
+ * SHA2_USE_BZERO_BCOPY depending on which function set you
+ * choose to use:
+ */
+#if !defined(SHA2_USE_MEMSET_MEMCPY) && !defined(SHA2_USE_BZERO_BCOPY)
+/* Default to memset()/memcpy() if no option is specified */
+#define SHA2_USE_MEMSET_MEMCPY 1
+#endif
+#if defined(SHA2_USE_MEMSET_MEMCPY) && defined(SHA2_USE_BZERO_BCOPY)
+/* Abort with an error if BOTH options are defined */
+#error Define either SHA2_USE_MEMSET_MEMCPY or SHA2_USE_BZERO_BCOPY, not both!
+#endif
+
+#ifdef SHA2_USE_MEMSET_MEMCPY
+#define MEMSET_BZERO(p,l) memset((p), 0, (l))
+#define MEMCPY_BCOPY(d,s,l) memcpy((d), (s), (l))
+#endif
+#ifdef SHA2_USE_BZERO_BCOPY
+#define MEMSET_BZERO(p,l) bzero((p), (l))
+#define MEMCPY_BCOPY(d,s,l) bcopy((s), (d), (l))
+#endif
+
+
+/*** THE SIX LOGICAL FUNCTIONS ****************************************/
+/*
+ * Bit shifting and rotation (used by the six SHA-XYZ logical functions:
+ *
+ * NOTE: The naming of R and S appears backwards here (R is a SHIFT and
+ * S is a ROTATION) because the SHA-256/384/512 description document
+ * (see http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf) uses this
+ * same "backwards" definition.
+ */
+/* Shift-right (used in SHA-256, SHA-384, and SHA-512): */
+#define R(b,x) ((x) >> (b))
+/* 32-bit Rotate-right (used in SHA-256): */
+#define S32(b,x) (((x) >> (b)) | ((x) << (32 - (b))))
+/* 64-bit Rotate-right (used in SHA-384 and SHA-512): */
+#define S64(b,x) (((x) >> (b)) | ((x) << (64 - (b))))
+
+/* Two of six logical functions used in SHA-256, SHA-384, and SHA-512: */
+#define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z)))
+#define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
+
+/* Four of six logical functions used in SHA-256: */
+#define Sigma0_256(x) (S32(2, (x)) ^ S32(13, (x)) ^ S32(22, (x)))
+#define Sigma1_256(x) (S32(6, (x)) ^ S32(11, (x)) ^ S32(25, (x)))
+#define sigma0_256(x) (S32(7, (x)) ^ S32(18, (x)) ^ R(3 , (x)))
+#define sigma1_256(x) (S32(17, (x)) ^ S32(19, (x)) ^ R(10, (x)))
+
+/* Four of six logical functions used in SHA-384 and SHA-512: */
+#define Sigma0_512(x) (S64(28, (x)) ^ S64(34, (x)) ^ S64(39, (x)))
+#define Sigma1_512(x) (S64(14, (x)) ^ S64(18, (x)) ^ S64(41, (x)))
+#define sigma0_512(x) (S64( 1, (x)) ^ S64( 8, (x)) ^ R( 7, (x)))
+#define sigma1_512(x) (S64(19, (x)) ^ S64(61, (x)) ^ R( 6, (x)))
+
+/*** INTERNAL FUNCTION PROTOTYPES *************************************/
+/* NOTE: These should not be accessed directly from outside this
+ * library -- they are intended for private internal visibility/use
+ * only.
+ */
+void SHA512_Last(SHA512_CTX*);
+void SHA256_Transform(SHA256_CTX*, const sha2_word32*);
+void SHA512_Transform(SHA512_CTX*, const sha2_word64*);
+
+
+/*** SHA-XYZ INITIAL HASH VALUES AND CONSTANTS ************************/
+/* Hash constant words K for SHA-256: */
+static const sha2_word32 K256[64] = {
+ 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5,
+ 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
+ 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3,
+ 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
+ 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc,
+ 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
+ 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7,
+ 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
+ 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13,
+ 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
+ 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3,
+ 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
+ 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5,
+ 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
+ 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208,
+ 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
+};
+
+/* Initial hash value H for SHA-256: */
+static const sha2_word32 sha256_initial_hash_value[8] = {
+ 0x6a09e667,
+ 0xbb67ae85,
+ 0x3c6ef372,
+ 0xa54ff53a,
+ 0x510e527f,
+ 0x9b05688c,
+ 0x1f83d9ab,
+ 0x5be0cd19
+};
+
+/* Hash constant words K for SHA-384 and SHA-512: */
+static const sha2_word64 K512[80] = {
+ SHA2_WORD64_CONST(0x428a2f98, 0xd728ae22), SHA2_WORD64_CONST(0x71374491, 0x23ef65cd),
+ SHA2_WORD64_CONST(0xb5c0fbcf, 0xec4d3b2f), SHA2_WORD64_CONST(0xe9b5dba5, 0x8189dbbc),
+ SHA2_WORD64_CONST(0x3956c25b, 0xf348b538), SHA2_WORD64_CONST(0x59f111f1, 0xb605d019),
+ SHA2_WORD64_CONST(0x923f82a4, 0xaf194f9b), SHA2_WORD64_CONST(0xab1c5ed5, 0xda6d8118),
+ SHA2_WORD64_CONST(0xd807aa98, 0xa3030242), SHA2_WORD64_CONST(0x12835b01, 0x45706fbe),
+ SHA2_WORD64_CONST(0x243185be, 0x4ee4b28c), SHA2_WORD64_CONST(0x550c7dc3, 0xd5ffb4e2),
+ SHA2_WORD64_CONST(0x72be5d74, 0xf27b896f), SHA2_WORD64_CONST(0x80deb1fe, 0x3b1696b1),
+ SHA2_WORD64_CONST(0x9bdc06a7, 0x25c71235), SHA2_WORD64_CONST(0xc19bf174, 0xcf692694),
+ SHA2_WORD64_CONST(0xe49b69c1, 0x9ef14ad2), SHA2_WORD64_CONST(0xefbe4786, 0x384f25e3),
+ SHA2_WORD64_CONST(0x0fc19dc6, 0x8b8cd5b5), SHA2_WORD64_CONST(0x240ca1cc, 0x77ac9c65),
+ SHA2_WORD64_CONST(0x2de92c6f, 0x592b0275), SHA2_WORD64_CONST(0x4a7484aa, 0x6ea6e483),
+ SHA2_WORD64_CONST(0x5cb0a9dc, 0xbd41fbd4), SHA2_WORD64_CONST(0x76f988da, 0x831153b5),
+ SHA2_WORD64_CONST(0x983e5152, 0xee66dfab), SHA2_WORD64_CONST(0xa831c66d, 0x2db43210),
+ SHA2_WORD64_CONST(0xb00327c8, 0x98fb213f), SHA2_WORD64_CONST(0xbf597fc7, 0xbeef0ee4),
+ SHA2_WORD64_CONST(0xc6e00bf3, 0x3da88fc2), SHA2_WORD64_CONST(0xd5a79147, 0x930aa725),
+ SHA2_WORD64_CONST(0x06ca6351, 0xe003826f), SHA2_WORD64_CONST(0x14292967, 0x0a0e6e70),
+ SHA2_WORD64_CONST(0x27b70a85, 0x46d22ffc), SHA2_WORD64_CONST(0x2e1b2138, 0x5c26c926),
+ SHA2_WORD64_CONST(0x4d2c6dfc, 0x5ac42aed), SHA2_WORD64_CONST(0x53380d13, 0x9d95b3df),
+ SHA2_WORD64_CONST(0x650a7354, 0x8baf63de), SHA2_WORD64_CONST(0x766a0abb, 0x3c77b2a8),
+ SHA2_WORD64_CONST(0x81c2c92e, 0x47edaee6), SHA2_WORD64_CONST(0x92722c85, 0x1482353b),
+ SHA2_WORD64_CONST(0xa2bfe8a1, 0x4cf10364), SHA2_WORD64_CONST(0xa81a664b, 0xbc423001),
+ SHA2_WORD64_CONST(0xc24b8b70, 0xd0f89791), SHA2_WORD64_CONST(0xc76c51a3, 0x0654be30),
+ SHA2_WORD64_CONST(0xd192e819, 0xd6ef5218), SHA2_WORD64_CONST(0xd6990624, 0x5565a910),
+ SHA2_WORD64_CONST(0xf40e3585, 0x5771202a), SHA2_WORD64_CONST(0x106aa070, 0x32bbd1b8),
+ SHA2_WORD64_CONST(0x19a4c116, 0xb8d2d0c8), SHA2_WORD64_CONST(0x1e376c08, 0x5141ab53),
+ SHA2_WORD64_CONST(0x2748774c, 0xdf8eeb99), SHA2_WORD64_CONST(0x34b0bcb5, 0xe19b48a8),
+ SHA2_WORD64_CONST(0x391c0cb3, 0xc5c95a63), SHA2_WORD64_CONST(0x4ed8aa4a, 0xe3418acb),
+ SHA2_WORD64_CONST(0x5b9cca4f, 0x7763e373), SHA2_WORD64_CONST(0x682e6ff3, 0xd6b2b8a3),
+ SHA2_WORD64_CONST(0x748f82ee, 0x5defb2fc), SHA2_WORD64_CONST(0x78a5636f, 0x43172f60),
+ SHA2_WORD64_CONST(0x84c87814, 0xa1f0ab72), SHA2_WORD64_CONST(0x8cc70208, 0x1a6439ec),
+ SHA2_WORD64_CONST(0x90befffa, 0x23631e28), SHA2_WORD64_CONST(0xa4506ceb, 0xde82bde9),
+ SHA2_WORD64_CONST(0xbef9a3f7, 0xb2c67915), SHA2_WORD64_CONST(0xc67178f2, 0xe372532b),
+ SHA2_WORD64_CONST(0xca273ece, 0xea26619c), SHA2_WORD64_CONST(0xd186b8c7, 0x21c0c207),
+ SHA2_WORD64_CONST(0xeada7dd6, 0xcde0eb1e), SHA2_WORD64_CONST(0xf57d4f7f, 0xee6ed178),
+ SHA2_WORD64_CONST(0x06f067aa, 0x72176fba), SHA2_WORD64_CONST(0x0a637dc5, 0xa2c898a6),
+ SHA2_WORD64_CONST(0x113f9804, 0xbef90dae), SHA2_WORD64_CONST(0x1b710b35, 0x131c471b),
+ SHA2_WORD64_CONST(0x28db77f5, 0x23047d84), SHA2_WORD64_CONST(0x32caab7b, 0x40c72493),
+ SHA2_WORD64_CONST(0x3c9ebe0a, 0x15c9bebc), SHA2_WORD64_CONST(0x431d67c4, 0x9c100d4c),
+ SHA2_WORD64_CONST(0x4cc5d4be, 0xcb3e42b6), SHA2_WORD64_CONST(0x597f299c, 0xfc657e2a),
+ SHA2_WORD64_CONST(0x5fcb6fab, 0x3ad6faec), SHA2_WORD64_CONST(0x6c44198c, 0x4a475817)
+};
+
+/* Initial hash value H for SHA-384 */
+static const sha2_word64 sha384_initial_hash_value[8] = {
+ SHA2_WORD64_CONST(0xcbbb9d5d, 0xc1059ed8),
+ SHA2_WORD64_CONST(0x629a292a, 0x367cd507),
+ SHA2_WORD64_CONST(0x9159015a, 0x3070dd17),
+ SHA2_WORD64_CONST(0x152fecd8, 0xf70e5939),
+ SHA2_WORD64_CONST(0x67332667, 0xffc00b31),
+ SHA2_WORD64_CONST(0x8eb44a87, 0x68581511),
+ SHA2_WORD64_CONST(0xdb0c2e0d, 0x64f98fa7),
+ SHA2_WORD64_CONST(0x47b5481d, 0xbefa4fa4)
+};
+
+/* Initial hash value H for SHA-512 */
+static const sha2_word64 sha512_initial_hash_value[8] = {
+ SHA2_WORD64_CONST(0x6a09e667, 0xf3bcc908),
+ SHA2_WORD64_CONST(0xbb67ae85, 0x84caa73b),
+ SHA2_WORD64_CONST(0x3c6ef372, 0xfe94f82b),
+ SHA2_WORD64_CONST(0xa54ff53a, 0x5f1d36f1),
+ SHA2_WORD64_CONST(0x510e527f, 0xade682d1),
+ SHA2_WORD64_CONST(0x9b05688c, 0x2b3e6c1f),
+ SHA2_WORD64_CONST(0x1f83d9ab, 0xfb41bd6b),
+ SHA2_WORD64_CONST(0x5be0cd19, 0x137e2179)
+};
+
+/*
+ * Constant used by SHA256/384/512_End() functions for converting the
+ * digest to a readable hexadecimal character string:
+ */
+static const char sha2_hex_digits[] = "0123456789abcdef";
+
+
+/*** SHA-256: *********************************************************/
+void SHA256_Init(SHA256_CTX* context) {
+ if (context == (SHA256_CTX*)0) {
+ return;
+ }
+ MEMCPY_BCOPY(context->state, sha256_initial_hash_value, SHA256_DIGEST_LENGTH);
+ MEMSET_BZERO(context->buffer, SHA256_BLOCK_LENGTH);
+ context->bitcount = 0;
+}
+
+#ifdef SHA2_UNROLL_TRANSFORM
+
+/* Unrolled SHA-256 round macros: */
+
+#ifndef WORDS_BIGENDIAN
+
+#define ROUND256_0_TO_15(a,b,c,d,e,f,g,h) \
+ REVERSE32(*data++, W256[j]); \
+ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + \
+ K256[j] + W256[j]; \
+ (d) += T1; \
+ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
+ j++
+
+
+#else
+
+#define ROUND256_0_TO_15(a,b,c,d,e,f,g,h) \
+ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + \
+ K256[j] + (W256[j] = *data++); \
+ (d) += T1; \
+ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
+ j++
+
+#endif
+
+#define ROUND256(a,b,c,d,e,f,g,h) \
+ s0 = W256[(j+1)&0x0f]; \
+ s0 = sigma0_256(s0); \
+ s1 = W256[(j+14)&0x0f]; \
+ s1 = sigma1_256(s1); \
+ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + K256[j] + \
+ (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0); \
+ (d) += T1; \
+ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \
+ j++
+
+void SHA256_Transform(SHA256_CTX* context, const sha2_word32* data) {
+ sha2_word32 a, b, c, d, e, f, g, h, s0, s1;
+ sha2_word32 T1, *W256;
+ int j;
+
+ W256 = (sha2_word32*)context->buffer;
+
+ /* Initialize registers with the prev. intermediate value */
+ a = context->state[0];
+ b = context->state[1];
+ c = context->state[2];
+ d = context->state[3];
+ e = context->state[4];
+ f = context->state[5];
+ g = context->state[6];
+ h = context->state[7];
+
+ j = 0;
+ do {
+ /* Rounds 0 to 15 (unrolled): */
+ ROUND256_0_TO_15(a,b,c,d,e,f,g,h);
+ ROUND256_0_TO_15(h,a,b,c,d,e,f,g);
+ ROUND256_0_TO_15(g,h,a,b,c,d,e,f);
+ ROUND256_0_TO_15(f,g,h,a,b,c,d,e);
+ ROUND256_0_TO_15(e,f,g,h,a,b,c,d);
+ ROUND256_0_TO_15(d,e,f,g,h,a,b,c);
+ ROUND256_0_TO_15(c,d,e,f,g,h,a,b);
+ ROUND256_0_TO_15(b,c,d,e,f,g,h,a);
+ } while (j < 16);
+
+ /* Now for the remaining rounds to 64: */
+ do {
+ ROUND256(a,b,c,d,e,f,g,h);
+ ROUND256(h,a,b,c,d,e,f,g);
+ ROUND256(g,h,a,b,c,d,e,f);
+ ROUND256(f,g,h,a,b,c,d,e);
+ ROUND256(e,f,g,h,a,b,c,d);
+ ROUND256(d,e,f,g,h,a,b,c);
+ ROUND256(c,d,e,f,g,h,a,b);
+ ROUND256(b,c,d,e,f,g,h,a);
+ } while (j < 64);
+
+ /* Compute the current intermediate hash value */
+ context->state[0] += a;
+ context->state[1] += b;
+ context->state[2] += c;
+ context->state[3] += d;
+ context->state[4] += e;
+ context->state[5] += f;
+ context->state[6] += g;
+ context->state[7] += h;
+
+ /* Clean up */
+ a = b = c = d = e = f = g = h = T1 = 0;
+}
+
+#else /* SHA2_UNROLL_TRANSFORM */
+
+void SHA256_Transform(SHA256_CTX* context, const sha2_word32* data) {
+ sha2_word32 a, b, c, d, e, f, g, h, s0, s1;
+ sha2_word32 T1, T2, *W256;
+ int j;
+
+ W256 = (sha2_word32*)context->buffer;
+
+ /* Initialize registers with the prev. intermediate value */
+ a = context->state[0];
+ b = context->state[1];
+ c = context->state[2];
+ d = context->state[3];
+ e = context->state[4];
+ f = context->state[5];
+ g = context->state[6];
+ h = context->state[7];
+
+ j = 0;
+ do {
+#ifndef WORDS_BIGENDIAN
+ /* Copy data while converting to host byte order */
+ REVERSE32(*data++,W256[j]);
+ /* Apply the SHA-256 compression function to update a..h */
+ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + W256[j];
+#else
+ /* Apply the SHA-256 compression function to update a..h with copy */
+ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + (W256[j] = *data++);
+#endif
+ T2 = Sigma0_256(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+
+ j++;
+ } while (j < 16);
+
+ do {
+ /* Part of the message block expansion: */
+ s0 = W256[(j+1)&0x0f];
+ s0 = sigma0_256(s0);
+ s1 = W256[(j+14)&0x0f];
+ s1 = sigma1_256(s1);
+
+ /* Apply the SHA-256 compression function to update a..h */
+ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] +
+ (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0);
+ T2 = Sigma0_256(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+
+ j++;
+ } while (j < 64);
+
+ /* Compute the current intermediate hash value */
+ context->state[0] += a;
+ context->state[1] += b;
+ context->state[2] += c;
+ context->state[3] += d;
+ context->state[4] += e;
+ context->state[5] += f;
+ context->state[6] += g;
+ context->state[7] += h;
+
+ /* Clean up */
+ a = b = c = d = e = f = g = h = T1 = T2 = 0;
+}
+
+#endif /* SHA2_UNROLL_TRANSFORM */
+
+void SHA256_Update(SHA256_CTX* context, const sha2_byte *data, size_t len) {
+ unsigned int freespace, usedspace;
+
+ if (len == 0) {
+ /* Calling with no data is valid - we do nothing */
+ return;
+ }
+
+ /* Sanity check: */
+ assert(context != (SHA256_CTX*)0 && data != (sha2_byte*)0);
+
+ usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH;
+ if (usedspace > 0) {
+ /* Calculate how much free space is available in the buffer */
+ freespace = SHA256_BLOCK_LENGTH - usedspace;
+
+ if (len >= freespace) {
+ /* Fill the buffer completely and process it */
+ MEMCPY_BCOPY(&context->buffer[usedspace], data, freespace);
+ context->bitcount += freespace << 3;
+ len -= freespace;
+ data += freespace;
+ SHA256_Transform(context, (sha2_word32*)context->buffer);
+ } else {
+ /* The buffer is not yet full */
+ MEMCPY_BCOPY(&context->buffer[usedspace], data, len);
+ context->bitcount += len << 3;
+ /* Clean up: */
+ usedspace = freespace = 0;
+ return;
+ }
+ }
+ while (len >= SHA256_BLOCK_LENGTH) {
+ /* Process as many complete blocks as we can */
+ SHA256_Transform(context, (sha2_word32*)data);
+ context->bitcount += SHA256_BLOCK_LENGTH << 3;
+ len -= SHA256_BLOCK_LENGTH;
+ data += SHA256_BLOCK_LENGTH;
+ }
+ if (len > 0) {
+ /* There's left-overs, so save 'em */
+ MEMCPY_BCOPY(context->buffer, data, len);
+ context->bitcount += len << 3;
+ }
+ /* Clean up: */
+ usedspace = freespace = 0;
+}
+
+void SHA256_Final(sha2_byte digest[], SHA256_CTX* context) {
+ sha2_word32 *d = (sha2_word32*)digest;
+ unsigned int usedspace;
+
+ /* Sanity check: */
+ assert(context != (SHA256_CTX*)0);
+
+ /* If no digest buffer is passed, we don't bother doing this: */
+ if (digest != (sha2_byte*)0) {
+ usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH;
+#ifndef WORDS_BIGENDIAN
+ /* Convert FROM host byte order */
+ REVERSE64(context->bitcount,context->bitcount);
+#endif
+ if (usedspace > 0) {
+ /* Begin padding with a 1 bit: */
+ context->buffer[usedspace++] = 0x80;
+
+ if (usedspace <= SHA256_SHORT_BLOCK_LENGTH) {
+ /* Set-up for the last transform: */
+ MEMSET_BZERO(&context->buffer[usedspace], SHA256_SHORT_BLOCK_LENGTH - usedspace);
+ } else {
+ if (usedspace < SHA256_BLOCK_LENGTH) {
+ MEMSET_BZERO(&context->buffer[usedspace], SHA256_BLOCK_LENGTH - usedspace);
+ }
+ /* Do second-to-last transform: */
+ SHA256_Transform(context, (sha2_word32*)context->buffer);
+
+ /* And set-up for the last transform: */
+ MEMSET_BZERO(context->buffer, SHA256_SHORT_BLOCK_LENGTH);
+ }
+ } else {
+ /* Set-up for the last transform: */
+ MEMSET_BZERO(context->buffer, SHA256_SHORT_BLOCK_LENGTH);
+
+ /* Begin padding with a 1 bit: */
+ *context->buffer = 0x80;
+ }
+ /* Set the bit count: */
+ *(sha2_word64*)&context->buffer[SHA256_SHORT_BLOCK_LENGTH] = context->bitcount;
+
+ /* Final transform: */
+ SHA256_Transform(context, (sha2_word32*)context->buffer);
+
+#ifndef WORDS_BIGENDIAN
+ {
+ /* Convert TO host byte order */
+ int j;
+ for (j = 0; j < 8; j++) {
+ REVERSE32(context->state[j],context->state[j]);
+ *d++ = context->state[j];
+ }
+ }
+#else
+ MEMCPY_BCOPY(d, context->state, SHA256_DIGEST_LENGTH);
+#endif
+ }
+
+ /* Clean up state data: */
+ MEMSET_BZERO(context, sizeof(context));
+ usedspace = 0;
+}
+
+char *SHA256_End(SHA256_CTX* context, char buffer[]) {
+ sha2_byte digest[SHA256_DIGEST_LENGTH], *d = digest;
+ int i;
+
+ /* Sanity check: */
+ assert(context != (SHA256_CTX*)0);
+
+ if (buffer != (char*)0) {
+ SHA256_Final(digest, context);
+
+ for (i = 0; i < SHA256_DIGEST_LENGTH; i++) {
+ *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
+ *buffer++ = sha2_hex_digits[*d & 0x0f];
+ d++;
+ }
+ *buffer = (char)0;
+ } else {
+ MEMSET_BZERO(context, sizeof(context));
+ }
+ MEMSET_BZERO(digest, SHA256_DIGEST_LENGTH);
+ return buffer;
+}
+
+char* SHA256_Data(const sha2_byte* data, size_t len, char digest[SHA256_DIGEST_STRING_LENGTH]) {
+ SHA256_CTX context;
+
+ SHA256_Init(&context);
+ SHA256_Update(&context, data, len);
+ return SHA256_End(&context, digest);
+}
+
+
+/*** SHA-512: *********************************************************/
+void SHA512_Init(SHA512_CTX* context) {
+ if (context == (SHA512_CTX*)0) {
+ return;
+ }
+ MEMCPY_BCOPY(context->state, sha512_initial_hash_value, SHA512_DIGEST_LENGTH);
+ MEMSET_BZERO(context->buffer, SHA512_BLOCK_LENGTH);
+ context->bitcount[0] = context->bitcount[1] = 0;
+}
+
+#ifdef SHA2_UNROLL_TRANSFORM
+
+/* Unrolled SHA-512 round macros: */
+#ifndef WORDS_BIGENDIAN
+
+#define ROUND512_0_TO_15(a,b,c,d,e,f,g,h) \
+ REVERSE64(*data++, W512[j]); \
+ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + \
+ K512[j] + W512[j]; \
+ (d) += T1, \
+ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)), \
+ j++
+
+
+#else
+
+#define ROUND512_0_TO_15(a,b,c,d,e,f,g,h) \
+ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + \
+ K512[j] + (W512[j] = *data++); \
+ (d) += T1; \
+ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)); \
+ j++
+
+#endif
+
+#define ROUND512(a,b,c,d,e,f,g,h) \
+ s0 = W512[(j+1)&0x0f]; \
+ s0 = sigma0_512(s0); \
+ s1 = W512[(j+14)&0x0f]; \
+ s1 = sigma1_512(s1); \
+ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + K512[j] + \
+ (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0); \
+ (d) += T1; \
+ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)); \
+ j++
+
+void SHA512_Transform(SHA512_CTX* context, const sha2_word64* data) {
+ sha2_word64 a, b, c, d, e, f, g, h, s0, s1;
+ sha2_word64 T1, *W512 = (sha2_word64*)context->buffer;
+ int j;
+
+ /* Initialize registers with the prev. intermediate value */
+ a = context->state[0];
+ b = context->state[1];
+ c = context->state[2];
+ d = context->state[3];
+ e = context->state[4];
+ f = context->state[5];
+ g = context->state[6];
+ h = context->state[7];
+
+ j = 0;
+ do {
+ ROUND512_0_TO_15(a,b,c,d,e,f,g,h);
+ ROUND512_0_TO_15(h,a,b,c,d,e,f,g);
+ ROUND512_0_TO_15(g,h,a,b,c,d,e,f);
+ ROUND512_0_TO_15(f,g,h,a,b,c,d,e);
+ ROUND512_0_TO_15(e,f,g,h,a,b,c,d);
+ ROUND512_0_TO_15(d,e,f,g,h,a,b,c);
+ ROUND512_0_TO_15(c,d,e,f,g,h,a,b);
+ ROUND512_0_TO_15(b,c,d,e,f,g,h,a);
+ } while (j < 16);
+
+ /* Now for the remaining rounds up to 79: */
+ do {
+ ROUND512(a,b,c,d,e,f,g,h);
+ ROUND512(h,a,b,c,d,e,f,g);
+ ROUND512(g,h,a,b,c,d,e,f);
+ ROUND512(f,g,h,a,b,c,d,e);
+ ROUND512(e,f,g,h,a,b,c,d);
+ ROUND512(d,e,f,g,h,a,b,c);
+ ROUND512(c,d,e,f,g,h,a,b);
+ ROUND512(b,c,d,e,f,g,h,a);
+ } while (j < 80);
+
+ /* Compute the current intermediate hash value */
+ context->state[0] += a;
+ context->state[1] += b;
+ context->state[2] += c;
+ context->state[3] += d;
+ context->state[4] += e;
+ context->state[5] += f;
+ context->state[6] += g;
+ context->state[7] += h;
+
+ /* Clean up */
+ a = b = c = d = e = f = g = h = T1 = 0;
+}
+
+#else /* SHA2_UNROLL_TRANSFORM */
+
+void SHA512_Transform(SHA512_CTX* context, const sha2_word64* data) {
+ sha2_word64 a, b, c, d, e, f, g, h, s0, s1;
+ sha2_word64 T1, T2, *W512 = (sha2_word64*)context->buffer;
+ int j;
+
+ /* Initialize registers with the prev. intermediate value */
+ a = context->state[0];
+ b = context->state[1];
+ c = context->state[2];
+ d = context->state[3];
+ e = context->state[4];
+ f = context->state[5];
+ g = context->state[6];
+ h = context->state[7];
+
+ j = 0;
+ do {
+#ifndef WORDS_BIGENDIAN
+ /* Convert TO host byte order */
+ REVERSE64(*data++, W512[j]);
+ /* Apply the SHA-512 compression function to update a..h */
+ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + W512[j];
+#else
+ /* Apply the SHA-512 compression function to update a..h with copy */
+ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + (W512[j] = *data++);
+#endif
+ T2 = Sigma0_512(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+
+ j++;
+ } while (j < 16);
+
+ do {
+ /* Part of the message block expansion: */
+ s0 = W512[(j+1)&0x0f];
+ s0 = sigma0_512(s0);
+ s1 = W512[(j+14)&0x0f];
+ s1 = sigma1_512(s1);
+
+ /* Apply the SHA-512 compression function to update a..h */
+ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] +
+ (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0);
+ T2 = Sigma0_512(a) + Maj(a, b, c);
+ h = g;
+ g = f;
+ f = e;
+ e = d + T1;
+ d = c;
+ c = b;
+ b = a;
+ a = T1 + T2;
+
+ j++;
+ } while (j < 80);
+
+ /* Compute the current intermediate hash value */
+ context->state[0] += a;
+ context->state[1] += b;
+ context->state[2] += c;
+ context->state[3] += d;
+ context->state[4] += e;
+ context->state[5] += f;
+ context->state[6] += g;
+ context->state[7] += h;
+
+ /* Clean up */
+ a = b = c = d = e = f = g = h = T1 = T2 = 0;
+}
+
+#endif /* SHA2_UNROLL_TRANSFORM */
+
+void SHA512_Update(SHA512_CTX* context, const sha2_byte *data, size_t len) {
+ unsigned int freespace, usedspace;
+
+ if (len == 0) {
+ /* Calling with no data is valid - we do nothing */
+ return;
+ }
+
+ /* Sanity check: */
+ assert(context != (SHA512_CTX*)0 && data != (sha2_byte*)0);
+
+ usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH;
+ if (usedspace > 0) {
+ /* Calculate how much free space is available in the buffer */
+ freespace = SHA512_BLOCK_LENGTH - usedspace;
+
+ if (len >= freespace) {
+ /* Fill the buffer completely and process it */
+ MEMCPY_BCOPY(&context->buffer[usedspace], data, freespace);
+ ADDINC128(context->bitcount, freespace << 3);
+ len -= freespace;
+ data += freespace;
+ SHA512_Transform(context, (sha2_word64*)context->buffer);
+ } else {
+ /* The buffer is not yet full */
+ MEMCPY_BCOPY(&context->buffer[usedspace], data, len);
+ ADDINC128(context->bitcount, len << 3);
+ /* Clean up: */
+ usedspace = freespace = 0;
+ return;
+ }
+ }
+ while (len >= SHA512_BLOCK_LENGTH) {
+ /* Process as many complete blocks as we can */
+ SHA512_Transform(context, (sha2_word64*)data);
+ ADDINC128(context->bitcount, SHA512_BLOCK_LENGTH << 3);
+ len -= SHA512_BLOCK_LENGTH;
+ data += SHA512_BLOCK_LENGTH;
+ }
+ if (len > 0) {
+ /* There's left-overs, so save 'em */
+ MEMCPY_BCOPY(context->buffer, data, len);
+ ADDINC128(context->bitcount, len << 3);
+ }
+ /* Clean up: */
+ usedspace = freespace = 0;
+}
+
+void SHA512_Last(SHA512_CTX* context) {
+ unsigned int usedspace;
+
+ usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH;
+#ifndef WORDS_BIGENDIAN
+ /* Convert FROM host byte order */
+ REVERSE64(context->bitcount[0],context->bitcount[0]);
+ REVERSE64(context->bitcount[1],context->bitcount[1]);
+#endif
+ if (usedspace > 0) {
+ /* Begin padding with a 1 bit: */
+ context->buffer[usedspace++] = 0x80;
+
+ if (usedspace <= SHA512_SHORT_BLOCK_LENGTH) {
+ /* Set-up for the last transform: */
+ MEMSET_BZERO(&context->buffer[usedspace], SHA512_SHORT_BLOCK_LENGTH - usedspace);
+ } else {
+ if (usedspace < SHA512_BLOCK_LENGTH) {
+ MEMSET_BZERO(&context->buffer[usedspace], SHA512_BLOCK_LENGTH - usedspace);
+ }
+ /* Do second-to-last transform: */
+ SHA512_Transform(context, (sha2_word64*)context->buffer);
+
+ /* And set-up for the last transform: */
+ MEMSET_BZERO(context->buffer, SHA512_BLOCK_LENGTH - 2);
+ }
+ } else {
+ /* Prepare for final transform: */
+ MEMSET_BZERO(context->buffer, SHA512_SHORT_BLOCK_LENGTH);
+
+ /* Begin padding with a 1 bit: */
+ *context->buffer = 0x80;
+ }
+ /* Store the length of input data (in bits): */
+ *(sha2_word64*)&context->buffer[SHA512_SHORT_BLOCK_LENGTH] = context->bitcount[1];
+ *(sha2_word64*)&context->buffer[SHA512_SHORT_BLOCK_LENGTH+8] = context->bitcount[0];
+
+ /* Final transform: */
+ SHA512_Transform(context, (sha2_word64*)context->buffer);
+}
+
+void SHA512_Final(sha2_byte digest[], SHA512_CTX* context) {
+ sha2_word64 *d = (sha2_word64*)digest;
+
+ /* Sanity check: */
+ assert(context != (SHA512_CTX*)0);
+
+ /* If no digest buffer is passed, we don't bother doing this: */
+ if (digest != (sha2_byte*)0) {
+ SHA512_Last(context);
+
+ /* Save the hash data for output: */
+#ifndef WORDS_BIGENDIAN
+ {
+ /* Convert TO host byte order */
+ int j;
+ for (j = 0; j < 8; j++) {
+ REVERSE64(context->state[j],context->state[j]);
+ *d++ = context->state[j];
+ }
+ }
+#else
+ MEMCPY_BCOPY(d, context->state, SHA512_DIGEST_LENGTH);
+#endif
+ }
+
+ /* Zero out state data */
+ MEMSET_BZERO(context, sizeof(context));
+}
+
+char *SHA512_End(SHA512_CTX* context, char buffer[]) {
+ sha2_byte digest[SHA512_DIGEST_LENGTH], *d = digest;
+ int i;
+
+ /* Sanity check: */
+ assert(context != (SHA512_CTX*)0);
+
+ if (buffer != (char*)0) {
+ SHA512_Final(digest, context);
+
+ for (i = 0; i < SHA512_DIGEST_LENGTH; i++) {
+ *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
+ *buffer++ = sha2_hex_digits[*d & 0x0f];
+ d++;
+ }
+ *buffer = (char)0;
+ } else {
+ MEMSET_BZERO(context, sizeof(context));
+ }
+ MEMSET_BZERO(digest, SHA512_DIGEST_LENGTH);
+ return buffer;
+}
+
+char* SHA512_Data(const sha2_byte* data, size_t len, char digest[SHA512_DIGEST_STRING_LENGTH]) {
+ SHA512_CTX context;
+
+ SHA512_Init(&context);
+ SHA512_Update(&context, data, len);
+ return SHA512_End(&context, digest);
+}
+
+
+/*** SHA-384: *********************************************************/
+void SHA384_Init(SHA384_CTX* context) {
+ if (context == (SHA384_CTX*)0) {
+ return;
+ }
+ MEMCPY_BCOPY(context->state, sha384_initial_hash_value, SHA512_DIGEST_LENGTH);
+ MEMSET_BZERO(context->buffer, SHA384_BLOCK_LENGTH);
+ context->bitcount[0] = context->bitcount[1] = 0;
+}
+
+void SHA384_Update(SHA384_CTX* context, const sha2_byte* data, size_t len) {
+ SHA512_Update((SHA512_CTX*)context, data, len);
+}
+
+void SHA384_Final(sha2_byte digest[], SHA384_CTX* context) {
+ sha2_word64 *d = (sha2_word64*)digest;
+
+ /* Sanity check: */
+ assert(context != (SHA384_CTX*)0);
+
+ /* If no digest buffer is passed, we don't bother doing this: */
+ if (digest != (sha2_byte*)0) {
+ SHA512_Last((SHA512_CTX*)context);
+
+ /* Save the hash data for output: */
+#ifndef WORDS_BIGENDIAN
+ {
+ /* Convert TO host byte order */
+ int j;
+ for (j = 0; j < 6; j++) {
+ REVERSE64(context->state[j],context->state[j]);
+ *d++ = context->state[j];
+ }
+ }
+#else
+ MEMCPY_BCOPY(d, context->state, SHA384_DIGEST_LENGTH);
+#endif
+ }
+
+ /* Zero out state data */
+ MEMSET_BZERO(context, sizeof(context));
+}
+
+char *SHA384_End(SHA384_CTX* context, char buffer[]) {
+ sha2_byte digest[SHA384_DIGEST_LENGTH], *d = digest;
+ int i;
+
+ /* Sanity check: */
+ assert(context != (SHA384_CTX*)0);
+
+ if (buffer != (char*)0) {
+ SHA384_Final(digest, context);
+
+ for (i = 0; i < SHA384_DIGEST_LENGTH; i++) {
+ *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4];
+ *buffer++ = sha2_hex_digits[*d & 0x0f];
+ d++;
+ }
+ *buffer = (char)0;
+ } else {
+ MEMSET_BZERO(context, sizeof(context));
+ }
+ MEMSET_BZERO(digest, SHA384_DIGEST_LENGTH);
+ return buffer;
+}
+
+char* SHA384_Data(const sha2_byte* data, size_t len, char digest[SHA384_DIGEST_STRING_LENGTH]) {
+ SHA384_CTX context;
+
+ SHA384_Init(&context);
+ SHA384_Update(&context, data, len);
+ return SHA384_End(&context, digest);
+}
projects / reactos.git / commitdiff