+/*
+ * PROJECT: ReactOS Kernel
+ * LICENSE: GNU GPLv2 only as published by the Free Software Foundation
+ * PURPOSE: To Implement AHCI Miniport driver targeting storport NT 5.2
+ * PROGRAMMERS: Aman Priyadarshi (aman.eureka@gmail.com)
+ */
+
#include "storahci.h"
BOOLEAN AhciAdapterReset(
- __in PAHCI_ADAPTER_EXTENSION adapterExtension
+ __in PAHCI_ADAPTER_EXTENSION adapterExtension
);
+/**
+ * @name AhciFindAdapter
+ * @implemented
+ *
+ * The HwStorFindAdapter routine uses the supplied configuration to determine whether a specific
+ * HBA is supported and, if it is, to return configuration information about that adapter.
+ *
+ * 10.1 Platform Communication
+ * http://www.intel.in/content/dam/www/public/us/en/documents/technical-specifications/serial-ata-ahci-spec-rev1_2.pdf
+
+ * @param DeviceExtension
+ * @param HwContext
+ * @param BusInformation
+ * @param ArgumentString
+ * @param ConfigInfo
+ * @param Reserved3
+ *
+ * @return
+ * SP_RETURN_FOUND
+ * Indicates that a supported HBA was found and that the HBA-relevant configuration information was successfully determined and set in the PORT_CONFIGURATION_INFORMATION structure.
+ *
+ * SP_RETURN_ERROR
+ * Indicates that an HBA was found but there was an error obtaining the configuration information. If possible, such an error should be logged with StorPortLogError.
+ *
+ * SP_RETURN_BAD_CONFIG
+ * Indicates that the supplied configuration information was invalid for the adapter.
+ *
+ * SP_RETURN_NOT_FOUND
+ * Indicates that no supported HBA was found for the supplied configuration information.
+ *
+ * @remarks Called by Storport.
+ */
ULONG AhciFindAdapter(
- IN PVOID DeviceExtension,
- __in PVOID HwContext,
- __in PVOID BusInformation,
- __in IN PVOID ArgumentString,
- __inout PPORT_CONFIGURATION_INFORMATION ConfigInfo,
- __in PBOOLEAN Reserved3
+ IN PVOID DeviceExtension,
+ __in PVOID HwContext,
+ __in PVOID BusInformation,
+ __in IN PVOID ArgumentString,
+ __inout PPORT_CONFIGURATION_INFORMATION ConfigInfo,
+ __in PBOOLEAN Reserved3
)
{
- /* Description :
- * The HwStorFindAdapter routine uses the supplied configuration to determine whether a specific
- * HBA is supported and, if it is, to return configuration information about that adapter.
- *
- * Refernce:
- * 10.1 Platform Communication
- * http://www.intel.in/content/dam/www/public/us/en/documents/technical-specifications/serial-ata-ahci-spec-rev1_2.pdf
- *
- * Return Value:
- * SP_RETURN_FOUND
- * Indicates that a supported HBA was found and that the HBA-relevant configuration information was successfully determined and set in the PORT_CONFIGURATION_INFORMATION structure.
- *
- * SP_RETURN_ERROR
- * Indicates that an HBA was found but there was an error obtaining the configuration information. If possible, such an error should be logged with StorPortLogError.
- *
- * SP_RETURN_BAD_CONFIG
- * Indicates that the supplied configuration information was invalid for the adapter.
- *
- * SP_RETURN_NOT_FOUND
- * Indicates that no supported HBA was found for the supplied configuration information.
- */
-
- ULONG ghc;
- ULONG portCount, portImplemented;
- ULONG pci_cfg_len;
- UCHAR pci_cfg_buf[0x30];
-
- PAHCI_MEMORY_REGISTERS abar;
- PPCI_COMMON_CONFIG pciConfigData;
- PAHCI_ADAPTER_EXTENSION adapterExtension;
-
- adapterExtension = (PAHCI_ADAPTER_EXTENSION)DeviceExtension;
- adapterExtension->SlotNumber = ConfigInfo->SlotNumber;
- adapterExtension->SystemIoBusNumber = ConfigInfo->SystemIoBusNumber;
-
- // get PCI configuration header
- pci_cfg_len = StorPortGetBusData(
- adapterExtension,
- PCIConfiguration,
- adapterExtension->SystemIoBusNumber,
- adapterExtension->SlotNumber,
- (PVOID)pci_cfg_buf,
- (ULONG)0x30);
-
- if (pci_cfg_len != 0x30)
- return SP_RETURN_ERROR;//Not a valid device at the given bus number
-
- pciConfigData = (PPCI_COMMON_CONFIG)pci_cfg_buf;
- adapterExtension->VendorID = pciConfigData->VendorID;
- adapterExtension->DeviceID = pciConfigData->DeviceID;
- adapterExtension->RevisionID = pciConfigData->RevisionID;
- // The last PCI base address register (BAR[5], header offset 0x24) points to the AHCI base memory, it’s called ABAR (AHCI Base Memory Register).
- adapterExtension->AhciBaseAddress = pciConfigData->u.type0.BaseAddresses[5] & (0xFFFFFFF0);
-
- // 2.1.11
- abar = NULL;
- if (ConfigInfo->NumberOfAccessRanges > 0)
- {
- ULONG accessIndex;
- for (accessIndex = 0; accessIndex < ConfigInfo->NumberOfAccessRanges; accessIndex++)
- {
- if ((*(ConfigInfo->AccessRanges))[accessIndex].RangeStart.QuadPart == adapterExtension->AhciBaseAddress)
- {
- abar = (PAHCI_MEMORY_REGISTERS)StorPortGetDeviceBase(
- adapterExtension,
- ConfigInfo->AdapterInterfaceType,
- ConfigInfo->SystemIoBusNumber,
- (*(ConfigInfo->AccessRanges))[accessIndex].RangeStart,
- (*(ConfigInfo->AccessRanges))[accessIndex].RangeLength,
- (BOOLEAN)!(*(ConfigInfo->AccessRanges))[accessIndex].RangeInMemory);
- break;
- }
- }
- }
-
- if (abar == NULL)
- return SP_RETURN_ERROR; // corrupted information supplied
-
- adapterExtension->ABAR_Address = abar;
- adapterExtension->CAP = StorPortReadRegisterUlong(adapterExtension, &abar->CAP);
- adapterExtension->CAP2 = StorPortReadRegisterUlong(adapterExtension, &abar->CAP2);
- adapterExtension->Version = StorPortReadRegisterUlong(adapterExtension, &abar->VS);
-
- // 10.1.2
- // 1. Indicate that system software is AHCI aware by setting GHC.AE to ‘1’.
- ghc = StorPortReadRegisterUlong(adapterExtension, &abar->GHC);
- // AE := Highest Significant bit of GHC
- if ((ghc & (0x1<<31)) == 1)//Hmm, controller was already in power state
- {
- // reset controller to have it in know state
- DebugPrint("AhciFindAdapter -> AE Already set, Reset()\n");
- if (!AhciAdapterReset(adapterExtension))
- return SP_RETURN_ERROR;// reset failed
- }
-
- ghc = 0x1<<31;// only AE=1
- StorPortWriteRegisterUlong(adapterExtension, &abar->GHC, ghc);
-
- adapterExtension->IS = abar->IS;
- adapterExtension->PortImplemented = StorPortReadRegisterUlong(adapterExtension, &abar->PI);
-
- if (adapterExtension->PortImplemented == 0)
- return SP_RETURN_ERROR;
-
- // get port count -- Number of set bits in `adapterExtension->PortImplemented`
- portCount = 0;
- portImplemented = adapterExtension->PortImplemented;
- while(portImplemented > 0)
- {
- portCount++;
- portImplemented &= (portImplemented - 1);// i love playing with bits :D
- }
-
- ConfigInfo->MaximumTransferLength = 128 * 1024;//128 KB
- ConfigInfo->NumberOfPhysicalBreaks = 0x21;
- ConfigInfo->MaximumNumberOfTargets = 1;
- ConfigInfo->MaximumNumberOfLogicalUnits = 1;
- ConfigInfo->ResetTargetSupported = TRUE;
- ConfigInfo->NumberOfBuses = 32;
- ConfigInfo->SynchronizationModel = StorSynchronizeFullDuplex;
- ConfigInfo->ScatterGather = TRUE;
-
- // Turn IE -- Interrupt Enabled
- ghc |= 0x2;
- StorPortWriteRegisterUlong(adapterExtension, &abar->GHC, ghc);
-
-
-
- return SP_RETURN_FOUND;
-}// -- AhciFindAdapter();
+ ULONG ghc;
+ ULONG portCount, portImplemented;
+ ULONG pci_cfg_len;
+ UCHAR pci_cfg_buf[0x30];
+
+ PAHCI_MEMORY_REGISTERS abar;
+ PPCI_COMMON_CONFIG pciConfigData;
+ PAHCI_ADAPTER_EXTENSION adapterExtension;
+ adapterExtension = (PAHCI_ADAPTER_EXTENSION)DeviceExtension;
+ adapterExtension->SlotNumber = ConfigInfo->SlotNumber;
+ adapterExtension->SystemIoBusNumber = ConfigInfo->SystemIoBusNumber;
+
+ // get PCI configuration header
+ pci_cfg_len = StorPortGetBusData(
+ adapterExtension,
+ PCIConfiguration,
+ adapterExtension->SystemIoBusNumber,
+ adapterExtension->SlotNumber,
+ (PVOID)pci_cfg_buf,
+ (ULONG)0x30);
+
+ if (pci_cfg_len != 0x30)
+ return SP_RETURN_ERROR;//Not a valid device at the given bus number
+
+ pciConfigData = (PPCI_COMMON_CONFIG)pci_cfg_buf;
+ adapterExtension->VendorID = pciConfigData->VendorID;
+ adapterExtension->DeviceID = pciConfigData->DeviceID;
+ adapterExtension->RevisionID = pciConfigData->RevisionID;
+ // The last PCI base address register (BAR[5], header offset 0x24) points to the AHCI base memory, it’s called ABAR (AHCI Base Memory Register).
+ adapterExtension->AhciBaseAddress = pciConfigData->u.type0.BaseAddresses[5] & (0xFFFFFFF0);
+
+ // 2.1.11
+ abar = NULL;
+ if (ConfigInfo->NumberOfAccessRanges > 0)
+ {
+ ULONG accessIndex;
+ for (accessIndex = 0; accessIndex < ConfigInfo->NumberOfAccessRanges; accessIndex++)
+ {
+ if ((*(ConfigInfo->AccessRanges))[accessIndex].RangeStart.QuadPart == adapterExtension->AhciBaseAddress)
+ {
+ abar = (PAHCI_MEMORY_REGISTERS)StorPortGetDeviceBase(
+ adapterExtension,
+ ConfigInfo->AdapterInterfaceType,
+ ConfigInfo->SystemIoBusNumber,
+ (*(ConfigInfo->AccessRanges))[accessIndex].RangeStart,
+ (*(ConfigInfo->AccessRanges))[accessIndex].RangeLength,
+ (BOOLEAN)!(*(ConfigInfo->AccessRanges))[accessIndex].RangeInMemory);
+ break;
+ }
+ }
+ }
+
+ if (abar == NULL)
+ return SP_RETURN_ERROR; // corrupted information supplied
+
+ adapterExtension->ABAR_Address = abar;
+ adapterExtension->CAP = StorPortReadRegisterUlong(adapterExtension, &abar->CAP);
+ adapterExtension->CAP2 = StorPortReadRegisterUlong(adapterExtension, &abar->CAP2);
+ adapterExtension->Version = StorPortReadRegisterUlong(adapterExtension, &abar->VS);
+
+ // 10.1.2
+ // 1. Indicate that system software is AHCI aware by setting GHC.AE to ‘1’.
+ ghc = StorPortReadRegisterUlong(adapterExtension, &abar->GHC);
+ // AE := Highest Significant bit of GHC
+ if ((ghc & (0x1<<31)) == 1)//Hmm, controller was already in power state
+ {
+ // reset controller to have it in know state
+ DebugPrint("AhciFindAdapter -> AE Already set, Reset()\n");
+ if (!AhciAdapterReset(adapterExtension))
+ return SP_RETURN_ERROR;// reset failed
+ }
+
+ ghc = 0x1<<31;// only AE=1
+ StorPortWriteRegisterUlong(adapterExtension, &abar->GHC, ghc);
+
+ adapterExtension->IS = abar->IS;
+ adapterExtension->PortImplemented = StorPortReadRegisterUlong(adapterExtension, &abar->PI);
+
+ if (adapterExtension->PortImplemented == 0)
+ return SP_RETURN_ERROR;
+
+ // get port count -- Number of set bits in `adapterExtension->PortImplemented`
+ portCount = 0;
+ portImplemented = adapterExtension->PortImplemented;
+ while(portImplemented > 0)
+ {
+ portCount++;
+ portImplemented &= (portImplemented - 1);// i love playing with bits :D
+ }
+
+ ConfigInfo->MaximumTransferLength = 128 * 1024;//128 KB
+ ConfigInfo->NumberOfPhysicalBreaks = 0x21;
+ ConfigInfo->MaximumNumberOfTargets = 1;
+ ConfigInfo->MaximumNumberOfLogicalUnits = 1;
+ ConfigInfo->ResetTargetSupported = TRUE;
+ ConfigInfo->NumberOfBuses = 32;
+ ConfigInfo->SynchronizationModel = StorSynchronizeFullDuplex;
+ ConfigInfo->ScatterGather = TRUE;
+
+ // Turn IE -- Interrupt Enabled
+ ghc |= 0x2;
+ StorPortWriteRegisterUlong(adapterExtension, &abar->GHC, ghc);
+
+
+
+ return SP_RETURN_FOUND;
+}// -- AhciFindAdapter();
+
+/**
+ * @name DriverEntry
+ * @implemented
+ *
+ * Initial Entrypoint for storahci miniport driver
+ *
+ * @param DriverObject
+ * @param RegistryPath
+ *
+ * @return
+ * NT_STATUS in case of driver loaded successfully.
+ */
ULONG DriverEntry(
- IN PVOID DriverObject,
- IN PVOID RegistryPath
+ IN PVOID DriverObject,
+ IN PVOID RegistryPath
)
{
- /*
- * Description :
- * Initial Entrypoint for storahci miniport driver
- */
+ HW_INITIALIZATION_DATA hwInitializationData;
+ ULONG i, status;
- HW_INITIALIZATION_DATA hwInitializationData;
- ULONG i, status;
+ DebugPrint("Storahci -> DriverEntry()\n");
- DebugPrint("Storahci -> DriverEntry()\n");
+ // initialize the hardware data structure
+ for (i = 0; i < sizeof(HW_INITIALIZATION_DATA); i++)
+ ((PUCHAR)&hwInitializationData)[i] = 0;
- // initialize the hardware data structure
- for (i = 0; i < sizeof(HW_INITIALIZATION_DATA); i++)
- ((PUCHAR)&hwInitializationData)[i] = 0;
+ // set size of hardware initialization structure
+ hwInitializationData.HwInitializationDataSize = sizeof(HW_INITIALIZATION_DATA);
- // set size of hardware initialization structure
- hwInitializationData.HwInitializationDataSize = sizeof(HW_INITIALIZATION_DATA);
+ // identity required miniport entry point routines
+ hwInitializationData.HwFindAdapter = AhciFindAdapter;
- // identity required miniport entry point routines
- hwInitializationData.HwFindAdapter = AhciFindAdapter;
+ // adapter specific information
+ hwInitializationData.NeedPhysicalAddresses = TRUE;
+ hwInitializationData.TaggedQueuing = TRUE;
+ hwInitializationData.AutoRequestSense = TRUE;
+ hwInitializationData.MultipleRequestPerLu = TRUE;
- // adapter specific information
- hwInitializationData.NeedPhysicalAddresses = TRUE;
- hwInitializationData.TaggedQueuing = TRUE;
- hwInitializationData.AutoRequestSense = TRUE;
- hwInitializationData.MultipleRequestPerLu = TRUE;
+ hwInitializationData.NumberOfAccessRanges = 6;
+ hwInitializationData.AdapterInterfaceType = PCIBus;
+ hwInitializationData.MapBuffers = STOR_MAP_NON_READ_WRITE_BUFFERS;
- hwInitializationData.NumberOfAccessRanges = 6;
- hwInitializationData.AdapterInterfaceType = PCIBus;
- hwInitializationData.MapBuffers = STOR_MAP_NON_READ_WRITE_BUFFERS;
-
- // set required extension sizes
- hwInitializationData.SrbExtensionSize = sizeof(AHCI_SRB_EXTENSION);
- hwInitializationData.DeviceExtensionSize = sizeof(AHCI_ADAPTER_EXTENSION);
+ // set required extension sizes
+ hwInitializationData.SrbExtensionSize = sizeof(AHCI_SRB_EXTENSION);
+ hwInitializationData.DeviceExtensionSize = sizeof(AHCI_ADAPTER_EXTENSION);
- // register our hw init data
- status = StorPortInitialize(
- DriverObject,
- RegistryPath,
- &hwInitializationData,
- NULL);
+ // register our hw init data
+ status = StorPortInitialize(
+ DriverObject,
+ RegistryPath,
+ &hwInitializationData,
+ NULL);
return status;
}// -- DriverEntry();
+/**
+ * @name AhciAdapterReset
+ * @implemented
+ *
+ * 10.4.3 HBA Reset
+ * If the HBA becomes unusable for multiple ports, and a software reset or port reset does not correct the
+ * problem, software may reset the entire HBA by setting GHC.HR to ‘1’. When software sets the GHC.HR
+ * bit to ‘1’, the HBA shall perform an internal reset action. The bit shall be cleared to ‘0’ by the HBA when
+ * the reset is complete. A software write of ‘0’ to GHC.HR shall have no effect. To perform the HBA reset,
+ * software sets GHC.HR to ‘1’ and may poll until this bit is read to be ‘0’, at which point software knows that
+ * the HBA reset has completed.
+ * If the HBA has not cleared GHC.HR to ‘0’ within 1 second of software setting GHC.HR to ‘1’, the HBA is in
+ * a hung or locked state.
+ *
+ * @param adapterExtension
+ *
+ * @return
+ * TRUE in case AHCI Controller RESTARTED successfully. i.e GHC.HR == 0
+ */
BOOLEAN AhciAdapterReset(
- PAHCI_ADAPTER_EXTENSION adapterExtension
+ PAHCI_ADAPTER_EXTENSION adapterExtension
)
{
- /*
- * 10.4.3 HBA Reset
- * If the HBA becomes unusable for multiple ports, and a software reset or port reset does not correct the
- * problem, software may reset the entire HBA by setting GHC.HR to ‘1’. When software sets the GHC.HR
- * bit to ‘1’, the HBA shall perform an internal reset action. The bit shall be cleared to ‘0’ by the HBA when
- * the reset is complete. A software write of ‘0’ to GHC.HR shall have no effect. To perform the HBA reset,
- * software sets GHC.HR to ‘1’ and may poll until this bit is read to be ‘0’, at which point software knows that
- * the HBA reset has completed.
- * If the HBA has not cleared GHC.HR to ‘0’ within 1 second of software setting GHC.HR to ‘1’, the HBA is in
- * a hung or locked state.
- */
- ULONG ghc, ticks;
- PAHCI_MEMORY_REGISTERS abar = NULL;
-
- abar = adapterExtension->ABAR_Address;
-
- if (abar == NULL) // basic sanity
- return FALSE;
-
- // HR -- Very first bit (lowest significant)
- ghc = 1;
- StorPortWriteRegisterUlong(adapterExtension, &abar->GHC, ghc);
-
- for (ticks = 0; (ticks < 50) &&
- (StorPortReadRegisterUlong(adapterExtension, &abar->GHC) == 1);
- StorPortStallExecution(20000), ticks++);
-
- if (ticks == 50)//1 second
- return FALSE;
-
- return TRUE;
+ ULONG ghc, ticks;
+ PAHCI_MEMORY_REGISTERS abar = NULL;
+
+ abar = adapterExtension->ABAR_Address;
+
+ if (abar == NULL) // basic sanity
+ return FALSE;
+
+ // HR -- Very first bit (lowest significant)
+ ghc = 1;
+ StorPortWriteRegisterUlong(adapterExtension, &abar->GHC, ghc);
+
+ for (ticks = 0; (ticks < 50) &&
+ (StorPortReadRegisterUlong(adapterExtension, &abar->GHC) == 1);
+ StorPortStallExecution(20000), ticks++);
+
+ if (ticks == 50)//1 second
+ return FALSE;
+
+ return TRUE;
}// -- AhciAdapterReset();
typedef struct _AHCI_PORT
{
- ULONG CLB; // 0x00, command list base address, 1K-byte aligned
- ULONG CLBU; // 0x04, command list base address upper 32 bits
- ULONG FB; // 0x08, FIS base address, 256-byte aligned
- ULONG FBU; // 0x0C, FIS base address upper 32 bits
- ULONG IS; // 0x10, interrupt status
- ULONG IE; // 0x14, interrupt enable
- ULONG CMD; // 0x18, command and status
- ULONG RSV0; // 0x1C, Reserved
- ULONG TFD; // 0x20, task file data
- ULONG SIG; // 0x24, signature
- ULONG SSTS; // 0x28, SATA status (SCR0:SStatus)
- ULONG SCTL; // 0x2C, SATA control (SCR2:SControl)
- ULONG SERR; // 0x30, SATA error (SCR1:SError)
- ULONG SACT; // 0x34, SATA active (SCR3:SActive)
- ULONG CI; // 0x38, command issue
- ULONG SNTF; // 0x3C, SATA notification (SCR4:SNotification)
- ULONG FBS; // 0x40, FIS-based switch control
- ULONG RSV1[11]; // 0x44 ~ 0x6F, Reserved
- ULONG Vendor[4]; // 0x70 ~ 0x7F, vendor specific
+ ULONG CLB; // 0x00, command list base address, 1K-byte aligned
+ ULONG CLBU; // 0x04, command list base address upper 32 bits
+ ULONG FB; // 0x08, FIS base address, 256-byte aligned
+ ULONG FBU; // 0x0C, FIS base address upper 32 bits
+ ULONG IS; // 0x10, interrupt status
+ ULONG IE; // 0x14, interrupt enable
+ ULONG CMD; // 0x18, command and status
+ ULONG RSV0; // 0x1C, Reserved
+ ULONG TFD; // 0x20, task file data
+ ULONG SIG; // 0x24, signature
+ ULONG SSTS; // 0x28, SATA status (SCR0:SStatus)
+ ULONG SCTL; // 0x2C, SATA control (SCR2:SControl)
+ ULONG SERR; // 0x30, SATA error (SCR1:SError)
+ ULONG SACT; // 0x34, SATA active (SCR3:SActive)
+ ULONG CI; // 0x38, command issue
+ ULONG SNTF; // 0x3C, SATA notification (SCR4:SNotification)
+ ULONG FBS; // 0x40, FIS-based switch control
+ ULONG RSV1[11]; // 0x44 ~ 0x6F, Reserved
+ ULONG Vendor[4]; // 0x70 ~ 0x7F, vendor specific
} AHCI_PORT;
typedef struct _AHCI_MEMORY_REGISTERS
{
- // 0x00 - 0x2B, Generic Host Control
- ULONG CAP; // 0x00, Host capability
- ULONG GHC; // 0x04, Global host control
- ULONG IS; // 0x08, Interrupt status
- ULONG PI; // 0x0C, Port implemented
- ULONG VS; // 0x10, Version
- ULONG CCC_CTL; // 0x14, Command completion coalescing control
- ULONG CCC_PTS; // 0x18, Command completion coalescing ports
- ULONG EM_LOC; // 0x1C, Enclosure management location
- ULONG EM_CTL; // 0x20, Enclosure management control
- ULONG CAP2; // 0x24, Host capabilities extended
- ULONG BOHC; // 0x28, BIOS/OS handoff control and status
+ // 0x00 - 0x2B, Generic Host Control
+ ULONG CAP; // 0x00, Host capability
+ ULONG GHC; // 0x04, Global host control
+ ULONG IS; // 0x08, Interrupt status
+ ULONG PI; // 0x0C, Port implemented
+ ULONG VS; // 0x10, Version
+ ULONG CCC_CTL; // 0x14, Command completion coalescing control
+ ULONG CCC_PTS; // 0x18, Command completion coalescing ports
+ ULONG EM_LOC; // 0x1C, Enclosure management location
+ ULONG EM_CTL; // 0x20, Enclosure management control
+ ULONG CAP2; // 0x24, Host capabilities extended
+ ULONG BOHC; // 0x28, BIOS/OS handoff control and status
- // 0x2C - 0x9F, Reserved
- ULONG Reserved[0xA0-0x2C];
+ // 0x2C - 0x9F, Reserved
+ ULONG Reserved[0xA0-0x2C];
- // 0xA0 - 0xFF, Vendor specific registers
- ULONG VendorSpecific[0x100-0xA0];
+ // 0xA0 - 0xFF, Vendor specific registers
+ ULONG VendorSpecific[0x100-0xA0];
- AHCI_PORT PortList[32];//1~32
+ AHCI_PORT PortList[32];//1~32
} AHCI_MEMORY_REGISTERS, *PAHCI_MEMORY_REGISTERS;
typedef struct _AHCI_ADAPTER_EXTENSION
{
- ULONG AdapterNumber;
- ULONG SystemIoBusNumber;
- ULONG SlotNumber;
- ULONG AhciBaseAddress;
- ULONG IS; // Interrupt status
- ULONG PortImplemented;
+ ULONG AdapterNumber;
+ ULONG SystemIoBusNumber;
+ ULONG SlotNumber;
+ ULONG AhciBaseAddress;
+ ULONG IS; // Interrupt status
+ ULONG PortImplemented;
- USHORT VendorID;
- USHORT DeviceID;
- USHORT RevisionID;
+ USHORT VendorID;
+ USHORT DeviceID;
+ USHORT RevisionID;
- ULONG Version;
- ULONG CAP;
- ULONG CAP2;
- PAHCI_MEMORY_REGISTERS ABAR_Address;
+ ULONG Version;
+ ULONG CAP;
+ ULONG CAP2;
+ PAHCI_MEMORY_REGISTERS ABAR_Address;
} AHCI_ADAPTER_EXTENSION, *PAHCI_ADAPTER_EXTENSION;
typedef struct _AHCI_SRB_EXTENSION
{
- ULONG AdapterNumber;
-} AHCI_SRB_EXTENSION;
\ No newline at end of file
+ ULONG AdapterNumber;
+} AHCI_SRB_EXTENSION;
projects / reactos.git / commitdiff